• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.157-163
• /
• 2016

BIM is currently applied in some domestic construction firms, but it is not being actively utilized due to changes in working environments and qualms about new studies. In order to utilize a BIM model in the design phase, process information is needed during construction, but the input system and utilization method of the process information's state are not complete. Therefore, we propose a BIM template for construction progress management that can show basic BIM information as the construction progresses in an easy and convenient way. This method will facilitate the adoption of BIM and enhance the productivity of construction companies. To this end, we designed a progress explorer for step-by-step progress and work schedules, and we generated three-dimensional views and a progress list by applying unit information (primary units, part units, and detail units) of the work breakdown structure (WBS) to the parameters. To use the BIM template, work progress information is input to the BIM modeling objects through Dynamo. We also used Dynamo for quick and easy calculation of the quantity of materials needed for construction work. To test the BIM template, we applied it to an actual project and evaluated its visibility and a progress list. The results showed that the proposed BIM template facilitates progress management of a project and can thus facilitate the adoption of BIM and improve the productivity of construction companies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.629-635
• /
• 2019

In this study, we analyzed the effect of FAN and oil cooler application on APU. MIL-STD-810 was applied to the atmospheric environment and radiation dose in order to perform thermal flow analysis. The heat flow was analyzed for the case in which the inlet / outlet fan was applied (Case 1), the case in which the inlet fan and the oil cooler were applied (Case 2), and the case in which the inlet / outlet fan and the oil cooler were applied (Case 3). As a result, it was confirmed that the cylinder head temperature of Case 3 was 21.4 times lower than that of Case 1 and 8.0 times lower than that of Case 2. Experiments were conducted under the same ambient conditions in order to examine the validity of the results. The numerical values and experimental results showed a difference of less than 7%. Through this, we were able to confirm that the APU heat flow optimization model satisfies the design conditions. The results of this study are expected to be used as basic data for optimizing heat flow of APU.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.93-99
• /
• 2017

The rate of traffic accidents that occurred in Korea last year is 10 out of every 100,000 people, ranking it 6th among the 35 OECD member countries. The accident rate of children with disabilities and elderly people is also high. The purpose of this study is to introduce traffic safety facilities which have been developed for the reduction of traffic accidents in non-urban areas in Korea through an analysis of the related literature, the accident factors using traffic accident analysis system data and traffic accident characteristics. Traffic safety integrated facilities for ICT-based pedestrian crossings are subject to cross-sectional coverage of child protection zones. The smart safety fence prevents vehicles from parking illegally and informs pedestrians that there is an access vehicle on the pedestrian crossing. The smart bump is designed to warn drivers who are not aware of the pedestrians. In order to standardize the appropriate form and size of the traffic safety facilities for pedestrian crossings, we constructed a standard model for each type, considering the road function, press classification, power, lane number, geometric form, etc. As a result, the rate of traffic accidents involving vulnerable people was reduced. In addition, it is anticipated that the maintenance costs will be reduced by the use of a solar power supply and their compatibility with the existing installed safety fences.

• Journal of Information Management
• /
• v.25 no.1
• /
• pp.24-46
• /
• 1994

In this paper I will discuss definitions of hypermedia, multimedia and hypertext. Hypertext is the grouping of relevant information in the form of nodes. These nodes are then connected together through links. In the case of hypertext the nodes contain text or graphics. Multimedia is the combining of different media types for example sound, animation, text, graphics and video for the presentation of information by making use of computers. Hypermedia can be viewed as an extension of hypertext and multimedia. It is based on the concept of hypertext that uses nodes and links in the structuring of information in the system. In this case the nodes consist of an the different data types that are mentioned in the multimedia definition above. The 'node-and-link' concept is used in organisation of the information in hypermedia systems. The 'book' metaphor is an example of the way these systems are implemented. This concept is explained and a few advantages and disadvantages of making use of hypermedia systems are discussed. A new approach for the development of hypermedia systems, namely the knowledge-based approach is now looked into. Joel Peing-Ling Loo proposed this approach because he thought that it is the most effective way for handling this kind of technology. A semantic-based hypermedia model is developed in this approach to formulate solutions for the restrictions in presenting information authoring, maintenance and retrieval. The knowledge-based presentation of information includes the use of conventional data structures. These data structures make use of frames(objects), slots and the inheritance theory that is also used in expert systems. Relations develop between the different objects as these objects are included in the database. Relations can also exist between frames by means of attributes that belong to the frames.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.315-323
• /
• 2015

Damage level of coastal structures has been scaled up according to increase of wave height and duration of the storm due to the abnormal global climate change. So, the design criteria for new breakwaters is being intensified and structural strengthening is also conducted for the existing breakwaters. Recently, interlocking concept has been much attention to enhance the structural stability of the conventional caisson structure designed individually to resist waves. The interlocking caisson breakwater may be survival even if unusual high wave occurs because the maximum wave force may be reduced by phase lags among the wave forces acting on each caisson. In this study, the dispersion characteristics of wave forces using interlocking system that connect the upper part of caisson with cable in the normal direction of breakwater was investigated. A simplified linear model was developed for computational efficiency, in which the foundation and connection cables were modelled as linear springs, and caisson structures were assumed to be rigid. From numerical experiments, it can be found that the higher wave forces are transmitted through the cable as the angle of incident wave is larger, and the larger the stiffness of the interlocking cable makes larger wave dispersion effect.

• Journal of Biomedical Engineering Research
• /
• v.23 no.6
• /
• pp.467-475
• /
• 2002

Hyperthermia using transrectal thermal probes has been used for a noninvasive treatment of prostate diseases. However it is known that heating the rectal wall at excessively high temperature can lead to destruction of the rectal mucous membrane. and it is difficult to maintain an optimum temperature over the entire prostate. Thus, a more accurate understanding of the heat transfer mechanism between prostate and hyperthermia system is needed Numerical analysis was performed to investigate how the cold/warm stimulations on the prostate surface affect the temperature distribution in the prostate model. The general purpose software "FLUENT" was used for obtaining a finite volume solution to the unsteady conduction equation and to calculate the time-varying temperature in the prostate. Effects of the warm/cold stimulations and the stimulation frequency on the temperature distribution were simulated. and we visualized how hyperthermia affected the inside of the prostate. It was found that the effect of hyperthermia by using a typical heating method is limited due to the low thermal conductivity of the prostate. Consecutive repetitions of warm and cold stimulations were considered to provide the thermal irritations inside a prostate. The effects of temperature difference and duration of warm/cold stimulations were investigated, and basic data for the optimum period and effective patterns of stimulations were obtained. A simplified bioheat equation was also solved to describe effects of the blood flow on the blood-tissue heat transfer. The effect of blood flow was not dominant compared to that of warm/cold stimulations. These results might be used as data for design of prostate treating probe, prostatic therapy and thermal stimulation effects on the prostate.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.55-65
• /
• 1986

The resistance to the passage of airflow through various agricultural products is an important consideration in the design of an aeration or drying system. The amount of resistance to airflow varied widely from one kind of grain to another, and depended upon airflow rate, surface texture and shape of the particles, the size and configuration of voids, and foreign and fine material in the grain bed. The airflow rate was the major factor considered on this kind of study in the early stages. But these days, the studies on the resistance to airflow of grain affected by grain moisture content and foreign and fine material have been widely carried out. However the foreign an fine material in the grain bed could not be a major factor on the study in Korea because there were only a few grain process procedure after harvesting it. The objectives of this study were to investigate the effect of moisture content and airflow rate on airflow resistance to grain, and to develop a model to predict the static pressure drop across the grain bed as a function of moisture content and airflow rate. The rough rice varieties, Akibare, Milyang 15 (Japonica types), Samkwang, Backyang (Indica types)and covered barley variety, Olbori, which were harvested in 1985 were used in the experiment after cleaning them. Resistances to airflow of grain were investigated at four levels of moisture content (13-25%, wb.) for ten different airflow rates($0.01-0.15m^3/sm^2$). The results of this study are summarized as follows; 1. Theaverage bulk densities were $585.3kg/m^3$ for rough rice and $691.6kg/m^3$ for barley at the loose fill, and were $648.8kg/m^3$ for rough rice and $758.2kg/m^3$ for barley at the packed fill. The pressure drops at the packed fill beds were approximately 1.4 to 1.8 times higher than those at the loose fill beds. 2. The pressure drops across grain beds deceased with the increase of moisture content and increased with airflow rate. The decreasing rates of pressure drop across grain beds according to the moisture contents at the lower airflow rates were higher than those at the higher airflow rates, and the increasing rates of pressure drop according to the airflow rates at the lower moisture contents were higher those at higher moisture contents. 3. The pressure drop across barley bed were much higher than rough rice beds and the pressure drops across Japonica type rough rice beds were a little higher than Indica type. 4. The mathematical models to predict the pressure drop across grain beds as a function of moisture content and airflow rate were developed from these experiments.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.271-310
• /
• 2017

This paper examines the composition and the content of media art which is an art education subject in a national curriculum of Australia; and discusses implications for Korean education curriculums. Media covered by Media Art subject in Australia are the multi types of general media including TV, movie, video, newspaper, radio, video game, the internet, and mobile media; and their contents. The purpose of ACARA's media art education curriculum is to improve creative use, knowledge, understanding, and technology of communication techniques for multiple purposes and the audiences. Through the Media Art subject, both the students and the community are able to participate in the actual communications with the rich culture surrounding them and to develop the knowledge and understanding of the 5 core concepts of language, technology, system, audience and re-creation while testing the culture. The implication of this study is as the following. ACARA's media art education curriculum has been developed as an independent educational program and has a special significance within Australian education curriculums. Although ACARA's media art education curriculum is formed as an independent subject, it is suggested within the curriculum to instruct in close connection with other subjects upon execution. Its organization and elaborateness in curriculum composition are very effective in terms of the teacher's teaching-learning design and as well as the evaluation. This seems to show a good model of leading media literacy curriculum. ACARA's media art education curriculum can be a great reference in introducing media literacy to Korean national education curriculums.

• The Korean Journal of Health Service Management
• /
• v.1 no.1
• /
• pp.75-89
• /
• 2007

The start point of a franchise system such as Lotteria was in 1979. Since 1990, the franchise systems in Korea have rapidly spread over all industry types. As 'Franchise Law' was enforced in 2002, the expansion of a franchise picked up its' speed. The barbers and beauty parlors business has the same expansion trend. However, there was no study about the franchise systems in the barbers and beauty parlors business. The purpose of this study was to find the goodness of fit of the structured equation model proposed and identify the significances of relationships in the variables of justice perceptions, trust, satisfactions, business performances, switching barriers, switching cost etc. This study tries to find a solution for a good development between franchisor and franchisee in the barbers and beauty parlors business in Korea. The theoretical considerations about justice of this study is limited in reciprocal relation justice and procedure justice. And it did make simplify for trust, satisfaction, business performance, switching barrier. And switching barrier did measure as dimension of switching coot. From October 26, 2005 to October 29, this study collected 250 survey questionnaires from the franchisees located in Seoul, Busan, Daegu, Ulsan, and Keoyng-Nam. In analyses of using SPSS Windows 11.0 and LISREL 8.14, this study used 208 cases because 48 cases did not response appropriately. Tn conclusions. reciprocal justice perception and procedure justice jointly determined trust. Secondly, reciprocal justice perception significantly determined satisfaction. Procedure justice perception negatively determined satisfaction, but this relationship was not significant. Thirdly, reciprocal justice perception positively influenced business performance, and procedure justice negatively influenced business performance, but the last relationship was not significant Fourthly, trust positively significantly influenced satisfaction and business performance. Fifthly, satisfaction positively influenced business performance and true determined switching barrier positively. This study shows following: firstly, a composition concept did make structural relationship and secondly, a reciprocal relation justice of a franchisor did appear as an important variable and it gives positive influence to trust, satisfactions, business performance, switching barriers of the franchisees.