• Journal of Environmental Science International
• /
• v.6 no.6
• /
• pp.645-658
• /
• 1997

A study on ventilation design using the spreadsheet model is carried out to propose means of available design. A sample of complex ventilation system In the non-standard condition Is used to illustrate thins spreadsheet model. In developing the spreadsheet model, this study has attempted to it general by using computional equations and design parameters that can be readily applied to any spreadsheet software. Also, most design data is contained in the spreadsheet template. This template provides the same design information as the ACGIH worksheet, and operates Quickly and emclenuy, and is fiexible enough to use under different conditions. This spreadsheet model allows the ventilation engineer to design quickly and accurately the ventilation system, without spending too much effort In the design process. By storing on computer and diskette, the design data computed finally can be used as a permanent record of specific ventilation system, and because of finally to be able to design over and over again while making only slight changes to the Input data, the spreadsheet model is used availably to accomplish the design optimazation by redesign and troubleshooting by review from field measurements. Also, the spreadsheet model is available for designing ventilation system under different condition or evaluating existing system or design drawing, because changes In the layout or formulae can be readily made to fit the needs of the designer.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.57-62
• /
• 2009

An embedded system is a computer system designed to perform one or a few dedicated functions often with real-time computing constraints. A traditional design process of embedded systems is the development of document-centric approach, and it is difficult to develop an embedded system efficiently because communication between teams or steps is not smooth. So the Model Based Design Process are applied to the development of embedded systems. This paper will compare the Model Based Design Process and the traditional design process, and introduce example of development of vehicle device applied the Model Based Design Process.

• Architectural research
• /
• v.1 no.1
• /
• pp.23-30
• /
• 1999

This research investigates a system for house design automation. The system is based on an object-oriented building data model, aiming to support the house design process conducted by non-expert users. Its object model, with simple yet powerful user interfaces, enables a CAD system to handle a complicated building system with much ease. Hence, the model dramatically simplifies the design process beyond just the automatic document generation. In this paper, we discuss the aspects of the building data model, introduce critical concepts such as grid objects and structured floor plan, and present a prototype system called GPLAN. The system is implemented in the framework of our building data model, and it provides a host of intelligent features that have been proved useful for house design automation.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.49-60
• /
• 2005

Existing CAD systems have configured geometry data and it is necessary to extend the configured geometry into a knowledge-based system. An intelligent CAD system emerged to provide such a knowledge-based system. However the intelligent CAD system has a limited product model to represent various knowledge models. This paper presents a model, called extended intelligent CAD model, which can extend the product model of the intelligent CAD system into further detailed knowledge model. The extended intelligent CAD model includes a whole design process knowledge and an efficiency of the model has been verified via a knowledge based wiper design system. The model can improve the functionality and efficiency of the existing CAD systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.87.2-87
• /
• 2001

By the state transformation including independent outputs functions, a nonlinear process model can be decomposed into two subsystems; the one(design model) is described in output variables as new states and used for control system synthesis and the other(disturbance model) is described in the original unavailable states and its couplings with the design model are treated as uncertain time-varying parameters in the design model. Its existence with respect to the design model is ignored. So, the design model is an uncertain time-variant system. Control synthesis based on a reduced design model is a combined ...

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.570-592
• /
• 2019

The Event-B design pattern is an excellent way to quickly develop a formal model of the system. Researchers have proposed a number of Event-B design patterns, but they all lack formal behavior semantics. This makes the analysis, verification, and simulation of the behavior of the Event-B model very difficult, especially for the control-intensive systems. In this paper, we propose a novel method to transform the Event-B synchronous control flow design pattern into the labeled transition system (LTS) behavior model. Then we map the design pattern instantiation process of Event-B to the instantiation process of LTS model and get the LTS behavior semantic model of Event-B model of a multi-level complex control system. Finally, we verify the linear temporal logic behavior properties of the LTS model. The experimental results show that the analysis and simulation of system behavior become easier and the verification of the behavior properties of the system become convenient after the Event-B model is converted to the LTS model.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.151-158
• /
• 2001

This paper describes an example of developing an integrated design system, Integrated Structural Design System for Reinforced Concrete Buildings(INDECON). INDECON incorporates a central database and three design modules: a preliminary design module(PDM), a structural analysis module(SAM), and a detailed design module(DDM). The development of INDECON begins with the development of design models including Design Object Model(DOM) which describes design data during the structural design process. The Design Object Model is transformed to Design Table Model(DTM) for the central database, and is specified to be in detail for the three design modules. Then the central database is implemented and managed by relational database management system(RDBMS), and the three design modules are implemented using C++ programming language. The central database in the server computer communicates with the design modules in the client computers using TCP/IP internet protocol. The developing procedure for INDECON in this paper can be applied for developing more comprehensive integrated structural design systems.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.4
• /
• pp.506-514
• /
• 2008

This paper presents an intelligent model; named as free model, approach for a closed-loop system identification using input and output data and its application to design a power system stabilizer (PSS). The free model concept is introduced as an alternative intelligent system technique to design a controller for such dynamic system, which is complex, difficult to know, or unknown, with input and output data only, and it does not require the detail knowledge of mathematical model for the system. In the free model, the data used has incremental forms using backward difference operators. The parameters of the free model can be obtained by simultaneous perturbation stochastic approximation (SPSA) method. A linear transformation is introduced to convert the free model into a linear model so that a conventional linear controller design method can be applied. In this paper, the feasibility of the proposed method is demonstrated in a one-machine infinite bus power system. The linear quadratic regulator (LQR) method is applied to the free model to design a PSS for the system, and compared with the conventional PSS. The proposed SPSA-based LQR controller is robust in different loading conditions and system failures such as the outage of a major transmission line or a three phase to ground fault which causes the change of the system structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.931-936
• /
• 1993

Optimal model following control scheme is to design the controller which makes the response of real system follow that of desirable model. This kind of design scheme is developed for first order system. We extends the scheme for second order system regarding the characteristics of mechanical second order system for vibration suppression of flexible structures. The model of mechanical second order system is obtained using suitable damping ratios and natural frequencies. Using this scheme, we can design the good controller which uses the characteristic of second order system. Numerical examples are presented which were used optimal model following control scheme.

• CDE review
• /
• v.3 no.3
• /
• pp.36-45
• /
• 1997

This paper presents the research on the development of Generic modeling system as a 3D CAD customizing system for the elevator design. This system enables to create a generic model which gives birth to many models. The generic model is expressed as a non-scale model or a standard model in this paper. Using the parametric design techniques, all their relationships are explicitly represented in the tables, not represented in implicit embedded coding. Owing to this method, designers can easily extend the generic model to contain more model families. All parametric relations are stored in relational database. A designer can retrieve various models from a generic model automatically, by using some key input values.