• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.119-120
• /
• 2007

The operation of Interference cancellation algorithm for wireless repeater cancellation depends on either existing correlation properties between desired signal and reference signal or not At the time, due to the correlation properties at the ICS system, adaptive algorithms without considering system delay do not function properly. Thus, this system should be oscillated. In this paper, to solve these problems, we use the delayed least mean square algorithm. For the best performance of ICS, the system delays must be estimated. To efficiently estimate the delay of ICS, we use relations between bandwidth and correlation properties of the received signal.

• Journal of Information Processing Systems
• /
• v.18 no.3
• /
• pp.389-401
• /
• 2022

The business of Internet of Vehicles (IoV) is growing rapidly, and the large amount of data exchange has caused problems of large mobile network communication delay and large energy loss. A strategy for resource allocation of IoV communication based on mobile edge computing (MEC) is thus proposed. First, a model of the cloud-side collaborative cache and resource allocation system for the IoV is designed. Vehicles can offload tasks to MEC servers or neighboring vehicles for communication. Then, the communication model and the calculation model of IoV system are comprehensively analyzed. The optimization objective of minimizing delay and energy consumption is constructed. Finally, the on-board computing task is coded, and the optimization problem is transformed into a knapsack problem. The optimal resource allocation strategy is obtained through genetic algorithm. The simulation results based on the MATLAB platform show that: The proposed strategy offloads tasks to the MEC server or neighboring vehicles, making full use of system resources. In different situations, the energy consumption does not exceed 300 J and 180 J, with an average delay of 210 ms, effectively reducing system overhead and improving response speed.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2016

In this paper, we verified accuracy of the satellite based augmentation system (SBAS) tropospheric delay correction model for the Korean region. We employed the precise data of the tropospheric zenith path delay (ZPD) which is provided by the international GNSS service (IGS). In addition, we compared the verification results with that of the Saastamoinen model and the Hopfield model. Consequently, the bias residual error of the SBAS tropospheric delay correction model is about 50 mm, whereas the Saastamoinen model and the Hopfield model are more accurate. This residual error by the tropospheric delay model can affect the SBAS user position accuracy, but there is no problem in SBAS accuracy requirement. If we modified the meteorological parameters for SBAS tropospheric model to appropriate in Korean weather environment, we can provide better SBAS service to the Korean user.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.498-508
• /
• 2009

In wireless mobile environments, large bandwidth and high QoS (Quality of Service) are recently required to support the increased demands for multimedia services. LTE (Long Term Evolution) is one of the promising solutions for the next generation broadband wireless access systems. To efficiently use downlink resource and effectively support QoS, packet scheduling algorithm is one of the important features in LTE system. In this paper, we proposed DAPS (Delay-Aware Packet Scheduling) algorithm to consider QoS requirements of delays for various traffic classes as well as channel condition and fairness. To reflect delay experiences at scheduling instance, DAPS observes how queue waiting time of packet is closed to maximum allowable delay. The simulation results show that the DAPS algorithm yields better performance for delay experience by increasing the number of transmitted packets with satisfying the required delay time compared with existing scheduling algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.570-576
• /
• 2004

In this paper, we design the IFFT/FFT (Inverse fast Fourier Transform/Fast Fourier Transform) modules for IEEE 802.11a-1999, which is a standard of the High-speed Wireless LAN using the OFDM (Orthogonal Frequency Division Multiplexing). The designed IFFT/FFT is the 64-point FFT to be compatible with IEEE 802.11a and the pipelined architecture which needs neither serial-to-parallel nor parallel-to-serial converter. We compare four types of IFFT/FFT modules for the hardware complexity and operation : R22SDF (Radix-2 Single-path Delay feedback), the R2SDF (Radix-2 Single-path Delay feedback), R2SDF (Radix-4 Single-path Delay Feedback), and R4SDC (Radix-4 Single-path Delay Commutator). In order to minimize the error, we design the IFFT/FFT module to operate with additional decimal parts after butterfly operation. In case of the R22SDF, the IFFT/FFT module has 44,747 gate counts excluding RAMs and the minimized error rate as compared with other types. And we know that the R22SDF has a small hardware structure as compared with other types.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.49-57
• /
• 2013

When pseudolite navigation system is applied to wide area, the tropospheric delay is the main error factor. In this study, we experimentally compared and analyzed the performance of the conventional pseudolite tropospheric delay models. The integration method using radiosonde meteorological data was suggested to derive the reference value for the comparison and analysis. Flight tests were carried out to analyze the performance of the tropospheric delay models according to the elevation angle and distance conditions between the user receiver and the pseudolite. As the results of this study, we provided the basis for the choice of tropospheric delay model appropriate to the relative location characteristics of the pseudolite and the user.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1542-1550
• /
• 2013

This paper presents new results on delay-dependent global exponential stability for uncertain linear systems with interval time-varying delay. Based on Lyapunov-Krasovskii functional approach, some novel delay-dependent stability criteria are derived in terms of linear matrix inequalities (LMIs) involving the minimum and maximum delay bounds. By using delay-partitioning method and the lower bound lemma, less conservative results are obtained with fewer decision variables than the existing ones. Numerical examples are given to illustrate the usefulness and effectiveness of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.181-184
• /
• 2003

Recently, the fieldbus becomes an indispensable component for many automated systems. In the fieldbus system, realtime data containing sensor values and control commands has a tendency to rapidly lose its value as time elapses after its creation. In order to deliver these data in time, the fieldbus network should be designed to have short delay compared to the maximum allowable delay. Because the communication delay is affected by performance parameters such as target rotation timer of token passing protocol, it is necessary to select proper parameter settings to satisfy the real-time requirement for communication delay. This paper presents the timer selection method for Profibus token passing networks using genetic algorithm (GA) to meet the delay requirements.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.274-279
• /
• 2007

We fabricated and characterized an optical delay line for optical coherence tomography (OCT). The delay line was composed of a cylindrical piezoelectric transduce (PZT) and a single mode optical fiber. The OCT system used a duplex scanning optical delay line which was symmetrically driven in the reference and sample arms. We showed that the sinusoidal-wave was superior to a triangular-wave for driving the optical delay line for scanning depth and repeatability.

• Bulletin of the Korean Mathematical Society
• /
• v.47 no.1
• /
• pp.89-102
• /
• 2010

This paper concerns the problem of global robust stability of a time-delay discontinuous system with a positive-defined connection matrix under polytopic-type uncertainty. In order to give the stability condition, we firstly address the existence of solution and equilibrium point based on the properties of M-matrix, Lyapunov-like approach and the theories of differential equations with discontinuous right-hand side as introduced by Filippov. Second, we give the delay-independent and delay-dependent stability condition in terms of linear matrix inequalities (LMIs), and based on Lyapunov function and the properties of the convex sets. One numerical example demonstrate the validity of the proposed criteria.