• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.699-702
• /
• 2002

Shunt valves implanted in the subcutaneous tissue of brain to treat patient with hydrocephalus were numerically simulated to investigate influence of pressure pulsation on their flow control characteristics. Shunt valves are subjected to pressure variation since ventricles enclosing the brain are under pressure pulsation rather than uniform pressure due to blood pressure variation. We modeled flow orifice through shunt valve and imposed pulsating pressure and valve diaphragm movement to compute flow through the valve. The results of our study indicated that flow rate increased by $40{\%}$ by introducing pressure pulsation and diaphragm movement on the shunt valve. Our results demonstrate the pressure-flow control characteristics of shunt valves unplanted above human brain may be quite different from the characteristics obtained by syringe pump test with uniform pressure and no diaphragm movement.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.423-426
• /
• 2002

A custom micro-PIV optics assembly has been used to measure the flow field inside a T-shaped microchannel. The micro-PIV system consists of microscope objectives of various magnifications, a dichroic cube, and an 8-bit CCD camera. Fluorescent particles of diameters 620nm have been used with a Nd:YAG laser and color filters. A programmable syringe pump with Teflon tubings were used to inject particle-seeded distilled water into the channel at flow rates of $420,\;40,\;60{\mu}L/hr$. The microchannels are fabricated with PDMS with a silicon mold, then $O_2-ion$ bonded onto a slide glass. Results show differences in flow characteristics and resolution according to fluid injection rates, and magnifications, respectively. The results show PIV results with vector-to-vector distances of $2{\mu}m$ with 32 pixel-square interrogation windows at $50{\%}$ overlap.

• Journal of the Korean Society of Visualization
• /
• v.11 no.3
• /
• pp.12-16
• /
• 2013

The impact and spreading behaviors of silicon dioxide nanoparticle colloidal suspension droplets were quantitatively visualized using a high-speed imaging system. Millimeter-scale droplets were generated by a syringe pump and a needle. Droplets of different velocity were impacted on a non-porous solid surface. Images were consecutively recorded using a CMOS high-speed camera at 5000 fps (frames per second) for millimeter-scale droplets. Temporal variations of droplet diameter, velocity and maximum spreading diameters were evaluated from the sequential images captured for each experimental condition. Effects of Reynolds number, Weber number, and particle concentration were investigated experimentally.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.57-63
• /
• 2005

The effects of an urea injection at the exhaust pipe for a 4-cylinder DI(Direct Injection) diesel engine were investigated with the parameters such as urea-SCR(Selective Catalytic Reduction) and EGR system. The urea quantity was controlled by NOx quantity and MAF(Manifold Air Flow). The urea injection quantity can be controlled with the urea syringe pump, precisely. The effects of NOx reduction for the urea-SCR system were investigated with and without ECR engine, respectively. It was concluded that the SUF(Stoichiometric Urea Flow) is calculated and the NOx results are visualized with engine speed and load. Furthermore, the NOx map is made from this experimental results. It was suggested, therefore, that NOx reduction effects of the urea-SCR system without the EGR engine were better than that with the EGR engine except of low load and low speed.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.13 no.3
• /
• pp.81-87
• /
• 2013

This article discusses the issues of benefit and possibility of application of patient-controlled sedation (PCS) for the dental treatment. The purpose of administering PCS for patients is to diminish anxiety and to provide cooperative and effective dental treatment. But there are a lot of barriers to application of PCS such as knowledge about pharmacokinetics of sedatives, expensive high speed and patient-controllable syringe pump, and well educated sedationist. And there could be risk of deep sedation, airway obstruction and hypoxic brain damages, etc. In order to decrease incidence of complication, appropriate drug selection, selection of right bolus dose, lock-out time is much important.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1941-1943
• /
• 2003

본 논문은 광 검출을 이용한 전기화학발광 (Electrochemiluminescence : ECL)을 마이크로시스템에 적용하여 소형화하였으며, 기존 광 검출 시스템과 결과를 비교하여 그 특성을 분석하였다. ECL은 전기에너지를 촉매로 사용하기 때문에 화학발광 보다 마이크로채널 내에서 발생하는 층류문제를 해결할 수 있는 적합한 방법이다. 유리기판에 Au를 박막으로 증착하여 전극으로 사용하였으며, SU-8 구조물을 이용한 PDMS mold를 사용하여 마이크로채널을 제작하였다. 전극과 PDMS는 $O_2$ 플라즈마를 이용하여 접합하였다. luminol과 과산화수소는 Syringe pump로 구동하였으며, 발생된 빛은 반도체 공정기술로 제작한 P-N접합 포토다이오드를 이용하여 전류신호로 측정하였다. 새로 구성된 시스템을 이용하여 마이크로채널 내에서의 luminol과 과산화수소의 유속, 농도변화에 따른 광전류 변화를 측정하여 기존시스템과 비교하였다.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.55-58
• /
• 2013

A new soot particle generation system has been developed and tested. The soot generation system consists of two sections, a fuel supply and a soot production. In the fuel supply module, either liquid fuel precisely controlled by a syringe pump is mixed with preheated carrier gas and rapidly evaporated or gaseous fuel controlled by a MFC is diluted with dilution gas. The soot production module contains a heater that can raise the gas/fuel temperature up to $1400^{\circ}C$. The physical and chemical properties of produced soot particles depend on the type and concentration of fuel, the residence time, and temperature in the soot production section. The soot generation system will be utilized to produce well-defined soot particles for soot studies such as the evaluation of experimental sampling and analysis processes for the quantitative assessment of PM and BC from ships and the adverse health effects on pulmonary and cardiovascular systems of human body.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.49-50
• /
• 2002

In micro-channels, the electro-viscous effect is caused by the electrical double layer on pressure-driven liquid flow. Velocity fields of flow inside micro-channels were measured using micro-PIV system for investigating the electro-viscous effect. De-ionized water and aqueous NaCl solutions with four different concentrations were used as working fluid in a PDMS micro-channel of $100{\mu}m$ width and $66{\mu}m$ height. The pressure gradient, dP/dx, was determined from the pre-determined input flow rate Q of syringe pump. The mean velocity $u_m$ used for calculating Reynolds number was obtained from the PIV velocity field data. These are used to plot the pressure gradient as a function of Reynolds numbers. The pressure gradient far lower concentration solution $(10^{-5}\;M)$ was higher than that for the higher concentration solution. The increase of flow resistance was about $30\%\;and\;37.5\%$ at Re=0.02 and 0.06, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.572-575
• /
• 2005

A microlens connected to microfluidic channel is fabricated. The microlens is sealed with an elastomeric membrane which deforms by pressure of fluid driven by a syringe pump resulting in the shape change of the microlens. The optical properties of the microlens could be controlled by changing the microlens shape. The microlens system were made of an elastomer, PDMS, using molding from a photoplastic master patterned by UV photolithography. The test results show the optical property of the lens could be made into convex and concave type by applying the fluidic pressure positive and negative.

• Korean Journal of Adult Nursing
• /
• v.18 no.5
• /
• pp.718-726
• /
• 2006

Purpose: The purpose of this study was to investigate differences between a pulmonary aspiration group and a non-pulmonary aspiration group in glucose concentration of tracheal secretions by measuring time and feeding methods. Method: The subjects were 36 ICU patients who were receiving formula via nasogastric tubes and had endotracheal tubes or tracheostomy tubes. Tracheal secretions were collected by connecting suction traps to a suction catheter in three different times(within 1 hour after feeding, between 1 to 2 hours after feeding, and between 2 to 3 hours after feeding) for 2 days, overall six times. Glucose concentration of tracheal secretions was measured with the glucometer(Accucheck II). Results: Glucose concentration of tracheal secretions increased in progression after feeding. The mean of specimens collected last(between two to three hours after feeding) was shown to be the highest value(M=61.61mg/dl) in the pulmonary aspiration group. Significantly(p=.000) more subjects(94.44%) in the pulmonary aspiration group received formula via a 50cc syringe than those in the non-pulmonary aspiration group(22.22%). Conclusion: Critically ill patients may need more time for head-elevation after tube feeding to prevent pulmonary aspiration. In practice, enteral formula should not be given the patients via a $50_cc$ syringe anymore, instead a feeding bag or infusion pump should be used to prevent pulmonary aspiration.