• 한국의류학회지
• /
• 제21권6호
• /
• pp.970-976
• /
• 1997

Synthetic leather added collagen protein was coagulated in DMF solution. With increasing collagen concentration, thickness of synthetic leather increased. In addition, water vapor permeability and water vapor absoption increased with increasing collagen protein concentration. But MIU and SMD value of surface properties decreased with increasing collagen protein concentration. As a result, synthetic leather added collagen protein showed comfort and dry touch.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.379-379
• /
• 2020

The influence of drought has increased due to global warming. In addition, forest fires have occurred more frequently due to droughts and resulted in property losses and casualty. In this study, the effects of drought on Goseong-Sokcho Forest Fire in 2019 were analyzed using high-resolution synthetic precipitation data. In order to determine the severity of drought, the average, 20%tile and 80%ile values were calculated using the synthetic precipitation data of the past 30 years and compared with the current climatology. We have investigated the multi-year accumulated precipitation data to determine the persistence of drought. In Goseong-Sokcho forest fire case, the two-year cumulative synthetic precipitation data shows a similar value to the climate, but the three-year cumulative synthetic precipitation data was close to the 20%ile lines of the climate value. It may expose that the shortage of precipitation in 2017 had persisted until 2019, despite abundant precipitation during the summer in 2018. Therefore, Goseong-Sokcho forest fire might be spread more rapidly by drought which has been persisted since 2017.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.275-287
• /
• 2018

In recent years, research on the development of eco-friendly synthetic suede based on water-dispersed polyurethane resin and non-fluorine water repellent has been conducted. Synthetic suede has a problem that the fastness to dyeing is greatly lowered after the water-repellent processing at a high temperature of $160^{\circ}C$ because the polyester is dyed with a disperse dye. Therefore, in this study, silica was added to water-dispersed polyurethane resin to improve dye fastness. To distribute the $PUD-SiO_2$ mixture evenly in the water-dispersed polyurethane resin, sufficient stirring was done for a period of time. When the $PUD-SiO_2$ mixture(PUD 1-5%) is applied to the substrate, it is confirmed through SEM that the mixture is uniformly applied without particle condensation. The results showed that silica with a diameter of 4~12nm and BET of $200{\sim}380g/m^2$ had the ability to improve dispersibility and fastness.

• 신재생에너지
• /
• 제8권2호
• /
• pp.24-32
• /
• 2012

Natural gas hydrates have a high potential as the 21st century new energy resource, because it have a large amount of deposits in many deep-water and permafrost regions of the world widely. Natural gas hydrate is formed by physical binding between water molecule and gas mainly composed of methane, which is captured in the cavities of water molecules under the specific temperature and pressure. $1m^3$ methane hydrate can be decomposed to the methane gas of $172m^3$ and water of $0.8m^3$ at standard condition. Therefore, there are a lot of practical applications such as separation processes, natural gas storage transportation and carbon dioxide sequestration. For the industrial utilization of methane hydrate, it is very important to rapidly manufacture hydrate. However, when methane hydrate is artificially formed, its reaction time may be too long and the gas consumption in water becomes relatively low, because the reaction rate between water and gas is low. So in this study, hydrate formation was experimented by adding natural zeolite and Synthetic zeolite 5A in distilled water, respectively. The results show that when the Synthetic zeolite 5A of 0.01 wt% was, the amount of gas consumed during the formation of methane hydrate was higher than that in the natural zeolite. Also, the natural zeolite and Synthetic zeolite 5A decreased the hydrate formation time to a greater extent than the distilled water at the same subcooling temperature.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1864-1870
• /
• 2004

A spot welded structures have an influence on a diverse climatic situation, for instance temperature, humidity and precipitation. In addition factors of environmental pollution such as acid rain, that courses corrosion, have the tendency to increase. But spot welded structures strength is affected by humidity and environment temperature. Therefore, it is important to evaluate effect of temperature and water immersion on strength properties of spot welded part. In this study, the strength distribution of spot welded plates is evaluated the environmental temperature of zinc coated steel plates. Test is conducted with welded part immersed in distilled and synthetic sea water. Specimens are immersed into water for 10, 100, 500 and 1000 hours to evaluate the offsets of water immersion time on tensile-shear strength under the conditions of -40, 0, 20 and 5$0^{\circ}C$. From this result, spot welded specimens with 5 mm clearance have lower tensile-shear strength in the distilled water or synthetic sea water than without clearance. And they have lower tensile-shear strength under -4$0^{\circ}C$ and over 5$0^{\circ}C$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.358-363
• /
• 2003

Spot welded structure is operated in diverse situation because of temperature, humidity and precipitation. In addition factors of environmental pollution such as acid rain, that courses corrosion, have the tendency to increase, But spot welded structure strength is affected by dampness and environment temperatures. Therefore, it is important to evaluate effect of temperature of spot welded part, In this study, the strength distribution of spot welded plates is evaluated about the environmental temperature of zine coated steel plates and test is conducted with welded part immersed in distilled and synthetic sea water. Specimens are immersed into water for 10, 100, 500 and 1000hours to evaluate the effects of water immersion time on tensile-shear strength under the conditions of -40, 0, 20 and $50^{\circ}C$. Strength is evaluated by tensile-shear test. The conditions of spot welding are 240kgf electrode force, 10KA welding current with 0 and 5mm clearance. From this study, spot welded specimens with clearance have lower tensile-shear strength in the distilled water or synthetic sea water comparing with spot welded specimens without clearance. And they have lower tensile-shear strength under $-40^{\circ}C$ and over $50^{\circ}C$.

• 한국지반신소재학회논문집
• /
• 제21권3호
• /
• pp.29-39
• /
• 2022

본 연구에서는 용탈 저감 효과가 있는 합성폴리머 실리카졸의 그라우트 성능을 평가하고, 기존 물유리계 SGR 주입재와 비교한 내용을 다루었다. 강도 및 내구성에 대한 실내실험 결과 합성폴리머 실리카졸는 물유리계 주입재 대비 2배 이상 높은 일축압축강도, 수축률 및 투수성에서 현저히 낮은 값을 보여주었고, pH는 먹는 물 수질기준인 8.5 이하였다. 용탈시험결과 합성폴리머 실리카졸의 Na₂O 용출량은 물유리계 주입재 대비 3~4배 작게 측정되었다. 이러한 결과로 보아 합성폴리머 실리카졸은 기존 물유리계 주입재보다 더 우수한 내구성 및 차수성을 가지는 것으로 판단된다.

• 한국물환경학회지
• /
• 제26권3호
• /
• pp.532-539
• /
• 2010

The synthetic unit hydrograph is developed and verified using Nash model and characteristic velocities considering geomorphological dispersion in this present study. Application watersheds are selected 5 subwatersheds of Bocheong basin. The mean and variance of hillslope and stream path length are estimated in each watershed with GIS. Characteristic velocities are calculated using estimated path lengths and moment characteristics of rainfall-runoff data. Characteristic velocities of random devised 7 ungauged watersheds are estimated through regional analysis of chracteristic velocities in guaged watershed. And Nash model parameters and IUH are derived using characteristic velocities and path length in the gauged and ungauged watershed. The result to compare of IUH about gauged watershed and random devised ungauged watershed in application watershed presents coherently hydrologic response characteristics that peak discharge is reduced and peak time is extended. In conclusion, Developed synthetic unit hydrograph in this study expects that it is useful method to estimate runoff discharge for managing of water pollution in ungauged watershed.

• 한국재료학회지
• /
• 제2권2호
• /
• pp.133-142
• /
• 1992

E-glass/Polyester 적층복합재료의 인공해수중에서의 인장특성을 알아보기 위해 PH를 각각 6.0, 8.2, 10.0으로 조절한 가운데 저 변형율 인장시험($1{\times}10^{-4}~1{\times}10^{-7}sec^{-1}$)을 행하였다. 대기와 인공해수중에서 인장하중을 받은 시험된 복합재료는 strain rate가 감소할수록 인장특성이 저하되며 $1{\times}10^{-7}sec^{-1}$의 strain rate에서 약간의 강성저하가 관찰되었다. 한편 인공해수중의 인장특성은 PH값에 따라 약간의 변화를 보였다.

• 한국환경보건학회지
• /
• 제23권4호
• /
• pp.115-120
• /
• 1997

The purpose of thesis was to investigate the removal efficiency of surfactants and commercial detergents by Oenanthe javanica that is one of aquatic plants in Korea. The experiment is concerned with measuring the concentrations of surfactants and commercial detergents in different media: 1) in pure water, 2) in water containing Oenanthe javanica, 3) in water containing Oenanthe javanica and commercial nutrients. The surfactants used in this research include linear alkylbenzene sulfonates (LAS), $\alpha$-sulfo fatty acid methyl esters(MES), and alkylbenzene sulfonates(ABS). Two commercial detergents designated as A and B were in the forms of power and liquid. The results showed that LAS and MES were more effectively removed by Oenanthe javanica probably because these have a chain of linear carbon than on ABS with a branched carbon structure. In the case of commercial detergents, when the except was performed on the basis of surfactants proportion, the removal trends were similar to LAS and MES. The 5-day cultivating test with initial concentration of 0.5-1.0 ppm surfactants showed that less than 10% was removed if no nutrients an Oenanthe javanica were added. When Oenanthe javanica was added into the sample solution containing surfactants, the removal efficiency was increased 100% for the solution containing 0.5-1.0 ppm 60-70% for 5-10 ppm. In addition, chlorisis on Oenanthe javanica was observed due to surfactants and commercial detergents for all three cases. To test the dependence of population density on nutrients, the initial population density was made 300 g/0.4 m$^2$. Throughout the 5-day experiment, the on Oenanthe javanica grew 20-25% with 0.5-1.0 ppm without the synthetic nutrients but by 5% with a high concentrations of 5-10 ppm. The population density was appeared to be independent of synthetic nutrients. The leaves were to be grown with synthetic nutrients, while roots were grown without synthetic nutrients. Based on this research, the fundamental data concerning cultivation and an adequate adjustment of the water condition can provide for the utilization of Oenanthe javanica in real water treatment system.