• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.28-35
• /
• 2018

$17{\alpha}-ethinylestradiol$ (EE2), a synthetic estrogen which interfere the endocrine and reproductive function in living organisms, has been found extensively to be deposited into municipal wastewater treatment plants and the environment via human excretion. EE2 has long been known to be efficiently cometabolized by ammonia-oxidizing bacteria (AOB) during ammonia ($NH_3$) oxidation. Current study aims to investigate the effect of culture history on the biotransformation of EE2 by nitrifying sludge which was enriched under different ammonia loading rates in continuous flow reactors. Result showed that past growth condition largely affected not only the metabolic rate of $NH_3$ oxidation but also EE2 cometabolism. Sludge previously acclimated with higher $NH_3$ loads as well as sludge dominated with AOB belong to high growth cluster (Nitrosomonas europaea-Nitrosococcus mobilis) showed higher rate of EE2 biotransformation than those one being acclimated with lower $NH_3$ loads because of its ability to provide more reducing power from $NH_3$ oxidation. Moreover, the correlation between the degradation rates of $NH_3$ and EE2 was higher in sludge being acclimated with higher load of $NH_3$ in comparison with other sludge. Implication of the findings emphasized the role of volumetric $NH_3$ loading rate in determining EE2 removal in wastewater treatment system.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.394-398
• /
• 1998

An optimum synthetic condition was studied for the MCS used as a silicone monomer. The contact mixture was made from the four component catalyst system($CuCl/ZnCl_2/Sn/Cd$) and silicon particles. The contact mass was used for a series of experiments with methyl chloride, which were designed and done to explore the optimum condition for MCS synthesis by an experimental design method. The optimum temperature and MeCl flow rate, which were obtained using 50g contact mass at 60rpm and 1 atm, were in the range of $300-305^{\circ}C$ and of 70-80ccm. Also a continuous run was performed to confirm the conditions. The results showed that the average reaction rate and selectivity were 170(g-MCS/hr.kg-Si) and 0.05 respectively at 67% conversion of MeCl and 92% silicon utilization rate. Also the parameters of overall reaction rate equation and a total pressure were estimated on the basis of the results of the continuous run.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.127-141
• /
• 2016

Electrodialysis (ED) is known to be a useful membrane process for desalination, concentration, separation, and purification in many fields. In this process, it is desirable to work at high current density in order to achieve fast desalination with the lowest possible effective membrane area. In practice, however, operating currents are restricted by the occurrence of concentration polarization phenomena. Many studies showed the occurrence of a limiting current density (LCD). The limiting current density in the electrodialysis process is an important parameter which determines the electrical resistance and the current utilization. Therefore, its reliable determination is required for designing an efficient electrodialysis plant. The purpose of this study is the development of a predictive model of the limiting current density in an electrodialysis process using response surface methodology (RSM). A two-factor central composite design (CCD) of RSM was used to analyze the effect of operation conditions (the initial salt concentration (C) and the linear flow velocity of solution to be treated (u)) on the limiting current density and to establish a regression model. All experiments were carried out on synthetic brackish water solutions using a laboratory scale electrodialysis cell. The limiting current density for each experiment was determined using the Cowan-Brown method. A suitable regression model for predicting LCD within the ranges of variables used was developed based on experimental results. The proposed mathematical quadratic model was simple. Its quality was evaluated by regression analysis and by the Analysis Of Variance, popularly known as the ANOVA.

• Microbiology and Biotechnology Letters
• /
• v.5 no.4
• /
• pp.171-175
• /
• 1977

A microbial strain capable of producing lactic acid was isolated and identified as Streptococcus faecium. During the incubation of the isolated bacterium in a synthetic medium (Petterson broth), the optimal temperature was 36 to 39$^{\circ}C$ and the cell concentration at stationary growth phase was 2.1${\times}$10$\^$8/ viable cells/ml. When it was dried in vacuum and diluted with avicel, the Viability of Streptococcus faecium in physiological saline solution was decreased to 80％ after incubation for 48 hr at 37$^{\circ}C$, whereas the viability was above 90％ after incubation for 1 hr at 40$^{\circ}C$ and the viability in M buffer solution (pH 4.5∼9.0) at 37$^{\circ}C$ was above 95％. From these data it was concluded that the isolated microbe must be adoptible for pharmaceutical preparation such as solid dosage form.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.273-280
• /
• 2020

Upon investigating the dental health of teeth and gum, and the cleanliness of the oral cavity of female college students in the early 20's, it was reported to be that the number of cariogenic bacteria was heavily related to the acidity of saliva or ammonia. Also, cariogenic bacteria and ammonia was found out to be related with proteins (p<0.01), and ammonia, the synthetic product of cariogenic bacteria was heavily related to blood and white blood cells (p<0.01). To conclude, the healthiness of teeth was related to the acidity of saliva and ammonia, the healthiness of gum was related to blood, proteins and white blood cells while the oral hygiene was most likely to be related to ammonia. This result matched to the seven oral disease cause analyses of the saliva analysis apparatus (Sill-Ha ST-4910), which implied further utilization of this data to clinical implications. However, this study is limited to young personnel who does not have any chronic or general diseases; therefore further study is required to generalize this study.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.610-615
• /
• 2001

Over 800 thousand tons per year (TPY) agricultural biowastes, such as sugar cane bagasse, sugarcane leaf, rice straw, rice husk and corn leaf, are produced in Taiwan. These biomasses are the major types of agricultural wastes and are abundantly available. However, these biowastes cause disposal and landfill problems. Ossification ashes of the agricultural biowastes containing 70-95 % amorphous silica would make the utilization system of agricultural biowaste ashes become highly economically and environmentally attractive. Experimentally, high crystallinity (99%$^{+}$) zeolites ZSM-5 and ZSM-48 synthesized from the reaction mixtures containing a silica source from ashes of these biowastes gasification were investigated. Tetrapropylammonium bromide (TPABr) and 1,6-diamino-hexane (C$_{6}$ DN) were used as structure-directing agents in syntheses of ZSM-5 and ZSM-48, respectively. X-ray powder diffraction (XRD) and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDX) data indicated that ZSM-5 or ZSM-48 with a high crystallinity can be obtained within 48 hours of crystallization in the high pressure (15-20 atm) autoclave at 393-473 K. The Si/Al ratios of synthetic zeolite products were determined by X-ray fluorescence (XRF) and induced couple plasma/mass spectroscopy (ICP/MS). It was observed that the ZSM-5 crystals a.e composed of hexagonal rod-shaped crystals with typically 8-13 пm in size by SEM. In addition, ZSM-48 crystalline materials are composed of spherical aggregates of needle-shaped or rod-like crystals with typically 2-3 пm in diameter and 6-8 пm in length.h.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.75-84
• /
• 2012

PURPOSES : This paper aims to improve the evaluation method of the Level of Service(LOS) for urban streets presented by the current Korean Highway Capacity Manual(KHCM) and suggest its utilization plan as a part of the methods to evaluate the sustainability of a transportation policy. METHODS : This paper carried out a research in 3 steps to develop a new evaluation method. First of all, this paper reviewed the previous studies related to the LOS of urban streets and the socially requested items for a sustainable transportation system. Then this paper derived an index and weight through expert questions to select an evaluation index. Lastly, this paper compared the results according to the existing evaluation methods with the new evaluation methods through case studies. This paper used an Analytic Hierarchy Process(AHP) for importance analysis and weight selection between new evaluation items and indices, and applied a Grey System Theory(GST) for a synthetic and integrated evaluation between the selected evaluation indices. RESULTS : As a result of evaluating the LOS according to the existing evaluation methods and the integrated evaluation methods using a GST through case studies, it was analyzed that new methods' results are less than or equal to the existing evaluation methods; and as a result of applying a weight between evaluation indices according to AHP, it was noticed that the total score seems to rise more when the LOS in the existing evaluation is calculated lower. It was analyzed that the LOS calculated by reflecting the newly established evaluation items and the importance between indices in this study has difference from the LOS of the existing urban streets. CONCLUSIONS : It is expected that this evaluation method can diagnose the current conditions when establishing a future sustainable traffic system and can be used for the measurement of the sustainability effects of the improvement plans and so on.

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.449-462
• /
• 2017

Direct treatment of municipal wastewater by forward osmosis (FO) process was evaluated in terms of water flux decline, reverse salt diffusion, pollutants rejection and concentration efficiency by using synthetic seawater as the draw solution. It was found that when operating in PRO mode (active layer facing the draw solution), although the FO membrane exhibited higher osmotic water flux, more severe flux decline and reverse salt diffusion was also observed due to the more severe fouling of pollutants in the membrane support layer and accompanied fouling enhanced concentration polarization. In addition, although the water flux decline was shown to be lower for the FO mode (active layer facing the feed solution), irreversible membrane fouling was identified in both PRO and FO modes as the water flux cannot be restored to the initial value by physical flushing, highlighting the necessity of chemical cleaning in long-term operation. During the 7 cycles of filtration conducted in the experiments, the FO membrane exhibited considerably high rejection for TOC, COD, TP and $NH_4{^+}-N$ present in the wastewater. By optimizing the volume ratio of seawater draw solution/wastewater feed solution, a concentration factor of 3.1 and 3.7 was obtained for the FO and PRO modes, respectively. The results demonstrated the validity of the FO process for direct treatment of municipal wastewater by using seawater as the draw solution, while facilitating the subsequent utilization of concentrated wastewater for bioenergy production, which may have special implications for the coastline areas.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10819-10824
• /
• 2015

Aims: To explore the effect and probable mechanism of a synthetic retinoid 4-amino-2-tri-fluoromethylphenyl ester (ATPR) on apoptosis of MDA-MB-231 breast cancer cells. Materials and Methods: MTT assays were performed to measure the proliferation of MDA-MB-231 cells treated with different concentrations of all-trans retinoic acid (ATRA) and ATPR. Morphologic changes were observed by microscopy. The apoptosis rates and cell cycling of MDA-MB-231 cells treated with ATRA or ATPR were assessed using flow cytometry analysis. Expression of retinoic acid receptor and phosphorylation of ERK, JNK, p38 proteins were detected by Western blotting. Results: Treatment of the cells with the addition of $15{\mu}mol/L$ ATPR for 48 h clearly demonstrated reduced cell numbers and deformed cells, whereas no changes in the number and morphology were observed after treatment with ATRA. The apoptosis rate was 33.2% after breast cancer MDA-MB-231 cells were treated by ATPR ($15{\mu}mol/L$) whereas ATRA ($15{\mu}mol/L$) had no apoptotic effect. ATPR inhibited the phosphorylation of ERK, JNK, and p38 while ATRA had no significant effect. ATPR inhibited the expression of BiP and increased the expression of Chop at the protein level compared with control groups, ATRA and ATPR both decreased the protein expression of $RXR{\alpha}$, ATPR reduced the protein expression of $RAR{\beta}$ and $RXR{\beta}$ while ATRA did not decrease $RAR{\beta}$ or $RXR{\beta}$. Conclusions: ATPR could induce apoptosis of breast cancer MDA-MB-231 cells, possible mechanisms being binding to $RAR{\beta}/RXR{\beta}$ heterodimers, then activation of ER stress involving the MAPK pathway.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.351-354
• /
• 2002

This research discussed about the substrate transport phenomena in anaerobic biofilm. Three anaerobic fixed biofilm reactors were filled with the sludge of anaerobic digestor from Suyoung wastewater treatment plant. After 15 days of biofilm formation periods, suspended solids within the reactors were removed, and each fixed biofilm reactor was supplied with synthetic wastewater of different concentration of 8.00 mgTOC/L, 9.76 mgTOC/L and 18.97 mgTOC/L, respectively. The experimental results in conjunction with substrate transfer phenomena indicated that data - thickness, substrate removal rate. At the low influent substrate concentration(reactor 1 : 8.00 mgTOC/L, reactor 2 : 9.76 mgTOC/L), the rate of substrate utilization($k_v$), effective diffusivity($D_{eff}$) of substrate in biofilm were similar. While $k_v$ and $D_{eff}$ of the high influent substrate concentration(reactor 3 : 18.97 mgTOC/L) were higher than data in the reactors of the low influent substrate concentration.