• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.445-452
• /
• 2008

Preliminary results are reported on ship detection using coherence images computed from cross-correlating images of multi-look-processed dual-polarization data (HH and HV) of ENVISAT ASAR. The traditional techniques of ship detection by radars such as CFAR (Constant False Alarm Rate) rely on the amplitude data, and therefore the detection tends to become difficult when the amplitudes of ships images are at similar level as the mean amplitude of surrounding sea clutter. The proposed method utilizes the property that the multi-look images of ships are correlated with each other. Because the inter-look images of sea surface are covered by uncorrelated speckle, cross-correlation of multi-look images yields the different degrees of coherence between the images and water. In this paper, the polarimetric information of ships, land and intertidal zone are first compared based on the cross-correlation between HH and HV images, In the next step, we examine the technique when the dual-polarization data are split into two multi-look images, It was shown that the inter-look cross-correlation method could be applicable in the performance improvement of small ship detection and the land masking, It was also found that a simple combination of coherence images from each co-polarised (HH) inter-look and cross-polarised (HV) inter-look data can provide much higher target-detection possibilities.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.414-422
• /
• 1984

This research was conducted to evaluate the effect of polluted Oncheon Stream on the marine organisms in the Suyeong Bay. Water quality and 96 hr acute toxicity to the sea urchin, Hemicentrotns pulcherrimus by recirculation bioassay were examined from Feb. 20 to Apr. 15, 1984. The 96 hr $50\%$ effective concentration($EC_{50}$) on the attachment of the podia of the sea urchin was observed to occur at test concentrations between 40.0 and $51.0\%$ (v/v), and safe concentrations may be assumed to be within 4.0 and $5.1\%$. These values indicate as follows : 1. Oncheon Stream was extremely polluted by oxygen-demanding wastes and synthetic organic compounds from sewage and industrial waste water. 2. Linear alkylbenzene sulfonate(LAS) which has not been yet included in water quality standard was discharged above the TLm. 3. Unknown toxicity may be synergy among complex substances. In consideration of the relationship between COD values of Oncheon Stream and dilution water, the effect of toxicity of Oncheon Stream water reached to the area of the Suyeong Bay where the COD value was found to be 12.2 ppm.

• Korean Journal of Environmental Biology
• /
• v.22 no.4
• /
• pp.524-531
• /
• 2004

Photosynthetic activities and primary production of phytoplankton were investigated in Lake Gocheonam from October 1999 to August 2000. As an estuary lake with a barrage in the Southwestern coast of the Korean peninsula, the lake has received more attention after it became known as the habitat of large population of rare and endangered bird- Baikal Teal. As the lake had high algal biomass ranging from $20\mu{g}\;chl-aL^{-1}\;to\;125\mu{g}\;chl-aL^{-1}$ in average values and rich eutrophication indicator species, the freshwaters were in a very productive or hypertrophic state. In the results obtained from the phytoplankton incubation in the laboratory, the maximum photosynthetic rate $(P_{max})$ varied according to seasons and sampling stations. Photo- synthetic activities were higher during the warm season than the cold seasons and the serial order of $P_{max}$ was August dominated with Microcystis, April with Chlamydomonas and Nitzschia, October with Chlamydomonas and January with Stephanodiscus. The water of the lake was persistently turbid throughout the year due to strong winds from the adjacent sea. Despite the water turbidity, the phytoplankton productions estimated from a mathematical model had very broad range from 18mg C $m^{-2}day^{-1}\;to\;10,300mg\;C\;m^{-2}day^{-1}$.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.368-371
• /
• 2006

A coastline is the boundary between land and ocean masses. Knowledge of coastline is essential for autonomous navigation, geographical exploration, coastal erosion monitoring and modelling, water line change, etc. Many methods have been researched to extract coastlines from the synthetic aperture radar (SAR) and optic images. Most methods were based on the intensity contrast between land and sea regions. However, in these methods, a coastline detection task was very difficult because of insufficient intensity contrast and the ambiguity in distinguishing coastline from other object line. In this paper, we propose an efficient method for the delineation of coastline using interferometric coherence values estimated from ERS tandem pair. The proposed method uses the facts that a tandem pair of ERS is acquired from a time interval of an accurate day and that the coherent and incoherent values in coherence map are land and water, respectively. The coherence map was generated from ERS tandem pair, filtered by MAP filter, and divided into land and water by the determination of threshold value that is based on the bimodality of the histogram. Finally, a coastline was detected by delineating the boundary pixels. There was a good visual match between the detected coastline and the manually contoured line. The interferometric coherence map will be helpful to identify land and water regions easily, and can be used to many applications that are related with a coastline.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2033-2042
• /
• 1993

In conventional SCC susceptibility test, there are constant strain test, constant load test, slow strain rate test(SSRT) and K$_{ISCC}$ test. Among them, the SSRT method is much more aggressive in producing SCC than the other tests, so that the test time of it is considerably reduced. But this SSRT method has mostly been worked using the uniaxial tensile specimen untill now. Therefore, the SSRT method using the tensile specimen(Ten-SSRT) has much difficulty in SCC susceptibility evaluation of a localized region like weldment and the advantage material of high order. Recentely, the small punch(SP) test method using miniaturized small specimen is the very effective test method for fracture strength evaluation of a localized region like weldment and fusion reactor wall irradiated in the nuclear power plant. This paper investigated the possibility of SCC susceptibility evaluation by the SP-SSRT method using the miniaturized small specimen. Therefore, we obtained the result that the SP-SSRT had the possibility for the evaluations of SCC susceptibility for shorter time to corrosive environment compare to Ten-SSRT which was conventional method.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.46-54
• /
• 1997

The object of this paper is to evaluate SCC(stress corrosion cracking) susceptibility for parent metal and bond line region of weld joints which have the various weld heat input condtions in TMCP(thermo-mechanical control process) steel by SP-SSRT(small punch-slow strain rate test) method. And the SCC test results of TMCP steel are compared with those of the conventional HT50 steel which has te almost same tensile strength level like TMCP steel. The loading rate used was $3\times10^{-4}$mm/min and the corrosive environment was synthetic sea water. According to the test results, in the case of parent metal, TMCP steel showed higher SCC susceptibility than HT50 steel because of the high plastic strain level of ferrite microstructure obtained by accelerated cooling. And in the case of bond line, the both TMCP steel and HT50 steel showed low load-displacement behaviors and higher SCC susceptibility above 0.6. These results may be caused by theembrittled martensite structure on HT50 steel and by the coarsened grain and the proeutectoid ferrite structure obtained by the impart of accelerated cooling effect on TMCP steel.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.492-501
• /
• 1990

It was known that the fracture incidences of offshore structure were mostly originated from the surface defects. Especially, in the case of the welded structures, since the welded region has some defects and incomplete beads which are apt to behave like the surface cracks, it has been necessary to evaluate the environmental effects on crack growth at HAZ for the design crack growth behaviour at multi-pall HAZ for SWS41 steel under free corrosion and cathodic protection(-0.9V vs Ag/Agcl) conditions. The results are summarized as follows ; (1) Crack growth rate of the as weld in air was faster than that of the parent and PWHT specimens over all .DELTA.K rang. (2) In free corrosion test, surface crack growth rate of the as welded was decreased in comparison with that of the parents. (3) In fatigue test under cathodic protection, cathodic electric potential(-0.9V vs Ag/Agcl) for the SWS41 steel parent was effective, while for the as welded ineffective. (4) There was a tendency that the exponent(m) of the Paris' equation was decreased in order of microhardness magnititude in air and under cathodic protection conditions and vise versa in free corrosion. (5) Fracture surface has dimples and ductile striations in air test, but transgranular cracks and brittle striations under cathodic protection test.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.149-157
• /
• 2016

In this paper, we propose a new clutter reduction algorithm, which rejects heavy clutter density in shallow water environments, based on a clustering method. At first, it applies the density-based clustering to active sonar measurements by considering speed of targets, pulse repetition intervals, etc. We assume clustered measurements as target candidates and remove noise, which is a set of unclustered measurements. After clustering, we classify target and clutter measurements by the validation check method. We evaluate the performance of the proposed algorithm on synthetic data and sea-trial data. The results demonstrate that the proposed algorithm provides significantly better performances to reduce clutter than the conventional algorithm.

• Steel and Composite Structures
• /
• v.4 no.2
• /
• pp.149-167
• /
• 2004

Offshore platforms have to serve in harsh environments and hence are likely to be damaged due to wave induced fatigue and environmental corrosion. Welded tubular joints in offshore platforms are most vulnerable to fatigue damage. Such damages endanger the integrity of the structure. Therefore it is all the more essential to assess the capacity of damaged structure from the point of view of its safety. Eight internally ring stiffened fatigue damaged tubular joints with nominal chord and brace diameter of 324 mm and 219 mm respectively and thickness 12 mm and 8 mm respectively were tested under axial brace compression loading to evaluate the reserve capacity of the joints. These joints had earlier been tested under fatigue loading under corrosive environments of synthetic sea water and hence they have been cracked. The extent of the damage varied from 35 to 50 per cent. One stiffened joint was also tested under axial brace tension loading. The residual strength of fatigue damaged stiffened joint tested under tension loading was observed to be less than one fourth of that tested under compression loading. It was observed in this experimental investigation that in the damaged condition, the joints possessed an in-built load-transfer mechanism. A bi-linear stress-strain model was developed in this investigation to predict the reserve capacity of the joint. This model considered the strain hardening effect. Close agreement was observed between the experimental and predicted results. The paper presents in detail the experimental investigation and the development of the analytical model to predict the reserve capacity of internally ring stiffened joints.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.11-20
• /
• 2013

Space-borne Synthetic Aperture Radar(SAR) has been one of the most effective tools for monitoring quantitative oceanographic physical parameters. The Doppler information recorded in single-channel SAR raw data can be useful in estimating moving velocity of water mass in ocean. The Doppler shift is caused by the relative motion between SAR sensor and the water mass of ocean surface. Thus, the moving velocity can be extracted by measuring the Doppler anomaly between extracted Doppler centroid and predicted Doppler centroid. The predicted Doppler centroid, defined as the Doppler centroid assuming that the target is not moving, is calculated based on the geometric parameters of a satellite, such as the satellite's orbit, look angle, and attitude with regard to the rotating Earth. While the estimated Doppler shift, corresponding to the actual Doppler centroid in the situation of real SAR data acquisition, can be extracted directly from raw SAR signal data, which usually calculated by applying the Average Cross Correlation Coefficient(ACCC). The moving velocity was further refined to obtain ocean surface current by subtracting the phase velocity of Bragg-resonant capillary waves. These methods were applied to Envisat ASAR raw data acquired in the East Sea, and the extracted ocean surface currents were compared with the current measured by HF-radar.