• Carbon letters
• /
• 제5권2호
• /
• pp.81-87
• /
• 2004

The effect of compositions of $Al_2O_3$ in the mixed $Fe/Al_2O_3$ catalysts on the synthetic behaviors of carbon nanotubes (CNTs) by catalytic chemical vapor deposition (CCVD) process was investigated in wide range of the mixture ratios of support materials. CNTs were synthesized with $Fe/Al_2O_3$ catalysis under the condition of 40 min in synthetic time, and 923 K of synthetic temperature using $C_2H_4$ and $H_2$ as synthetic and carrier gas, respectively. The carbon yield with the content of $Al_2O_3$ showed in a parabolic curve and the maximum carbon yield was 40 wt.% of $Al_2O_3$. As the mixture ratio of $Al_2O_3$ increased, decreasing tendency was observed in the diameter of CNTs. Specific surface areas of CNTs were increased with the increase of the mixture ratio of $Al_2O_3$.

• Korean Chemical Engineering Research
• /
• 제57권3호
• /
• pp.420-424
• /
• 2019

포항산업과학연구원(RIST, Research Institute of Industrial Science & Technology)-고등기술연구원(IAE, Institute for Advanced Engineering)에서 제안한 합성천연가스(Synthetic Natural Gas, SNG) 제조공정(3개의 단열반응기와 1개의 등온반응기로 구성됨)에서, 합성가스와 함께 스팀을 공급함으로써 메탄화반응과 수성가스전환반응을 동시에 반응시켜 촉매층의 온도와 촉매 비활성화를 제어하였다. SNG 공정개발을 위해 본 연구에서는, 포항산업과학연구원에서 제조한 니켈계 촉매를 사용하여 낮은 $H_2/CO$ 비($CO_2$ 22% 포함) 조건에서의 메탄화반응 특성을 평가하였다. 운전조건(1차 단열반응기의 $H_2O/CO$ 비, 4차 등온반응기의 운전온도 범위 등)은 이전의 연구 결과를 반영하였으며, 동일한 조건을 유지하면서 파일럿 규모의 SNG 공정을 운전하였다. 그 결과, 파일럿 규모의 SNG 공정은 안정적으로 운전되었으며, CO 전환율 100%, $CH_4$ 선택도는 96.9% 그리고 $CH_4$ 생산성은 $660ml/g_{cat}{\cdot}h$의 값을 얻었다.

• Membrane and Water Treatment
• /
• 제3권3호
• /
• pp.151-168
• /
• 2012

Gas sparging is one of the techniques used to control the concentration polarization during ultrafiltration. In this work, the effects of gas sparging in stratified flow regime were investigated during gel layer controlling cross flow ultrafiltration in a rectangular channel. Synthetic solution of pectin was used as the gel forming solute. The liquid and gas flow rates were selected such that a stratified flow regime was prevalent in the channel. A mass transfer model was developed for this system to quantify the effects of gas flow rates on mass transfer coefficient (Sherwood number). The results were compared with the case of no gas sparging. Gas sparging led to an increase of mass transfer coefficient by about 23% in this case. The limitation of the developed model was also evaluated and it was observed that beyond a gas flow rate of 20 l/h, the model was unable to explain the experimental observation, i.e., the decrease in permeate flux with flow rate.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2122-2126
• /
• 2007

A special PM-Tube(Photo Multiplier Tube) that is using the photoelectric effect has been designed and manufactured to measure the radiation energy of arc in a gas circuit breaker(GCB). The PM-Tube, LLG(liquid light guides), ND(neutral density) filter, and a model gas circuit breaker have been combined for the reception and the transmission of the light and a simplified synthetic test facility with the arc energy measuring system has been established. In the case of $SF_6$ gas pressure $5kg.f/cm^2$ and arc length 20mm, the radiation energy increases with the arc current but it tend to be saturated in the above 20kA. Under the arc current 20kA, the total radiation energy has the biggest value around 8kA and was not exceeded 40% of the total arc energy.

• 한국식품위생안전성학회지
• /
• 제12권3호
• /
• pp.210-216
• /
• 1997

The prevention of oxidative degradation in fats and oils is largely controlled by the use of synthetic phenolic antioxidants. Antioxidants, BHA: 2-&-3-tert-butyl-4-hydroxyanisol, BHT: 3,5-di-tert-butyl-4-hydroxytoluene, TBHQ: tert-butylhydroquinone, PG: propyl gallate, PTG: pentyl gallate, OG:octyl gallate, were extracted from fatty foods with hexane and from hexane layer to presaturated acetonitrile with hexane. The polar phenolic hydroxyl groups of antioxidants were silylated with MSTFA and injected to Gas Chromatography/Mass Spectrometry. The calibration plots were linear in the investigated range, 0.1~10.0 $\mu\textrm{g}$/g. The limit of detection for 6 phenolic antioxidants was 0.1 $\mu\textrm{g}$/g. Recoveries and reproducibilities from samples fortified at 1.0 $\mu\textrm{g}$/g were in the range of 70~90% and 0.5~13%, respectively. The simultaneous determination of phenolic antioxidants in fatty foods using GC/MS-SIM mode and macro program was described.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.969-973
• /
• 2016

Interruption tests were conducted using the same circuit breaker for an initial pressure of SF₆ 0.5 MPa (gauge pressure) and CO₂ mixture 1.0 MPa, 0.8 MPa, and 0.6 MPa. The pressure-rises in the compression and thermal expansion chambers were measured for verifying the computational results using a simplified synthetic test facility. Further, the possibility of the CO₂ mixture substituting SF₆ gas was confirmed. Moreover, in view of the thermal recovery capability, it has also been confirmed that the pressure of the CO₂ mixture can be reduced almost to the same value as that of the SF₆ gas by optimizing the design parameters of the interrupter.

• 한국가스학회지
• /
• 제20권3호
• /
• pp.1-11
• /
• 2016

수압파쇄된 석탄층 메탄가스(coalbed methaen, CBM) 수평정의 생산거동을 예측하고 궁극가채매장량(estimated ultimate recovery, EUR)을 산출하기 위해 감퇴곡선분석, 유동영역분석, 유동물질평형분석을 활용하여 CBM 생산자료를 분석하였다. 가상의 생산자료를 발생시키기 위해 미국의 아팔라치안 분지(Appalachian basin)의 CBM 물성자료를 기반으로 저류층 모델을 구축하였다. 생산자료 분석 결과, 약 6~16년간 천이유동이 발생하였으며, 그 후에 경계지배 유동이 발생하였다. 천이유동 구간의 자료를 활용하여 생산자료 분석을 시행할 경우 예측된 생산자료와 가상의 생산자료 간의 큰 오차가 발생하였으며, 생산거동 예측이 불가함을 확인하였다. 경계지배유동의 생산자료 분석 결과, 1년 이상의 자료를 가지고 있을 때 EUR 오차율 5%이내에서 생산거동 예측이 가능한 것으로 확인되었다.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.29-36
• /
• 2010

합성과 천연 에메랄드의 열처리에 따른 분광특성 변화를 가시광선과 적외선 분광분석으로 관찰하였다. X-선 형광분석 결과 flux 합성 에메랄드에서는 Mo과 Co이 검출 되었고, hydrothermal 합성 에메랄드에서는 Cl 성분이 나타났다. 자외선-가시광선 분광분석 결과는 콜롬비아산 에메랄드 시료에서 열처리 후에 전체적인 흡수 세기가 증가 한 것을 확인 하였다. 적외선 분광 분석 결과, hydrothermal 합성 에메랄드에서 Cl 성분에 관련된 피크가 $3000-2600cm^{-1}$에서 나타났고, 천연 에메랄드에서는 $CO_2$에 기인하는 $2358cm^{-1}$피크가 열처리후에 감소된 것을 확인하였다. 이는 열처리 후에 기체 성분이 변화된 것과 일치 하였다.

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.181-189
• /
• 2017

This paper describes experimental results on combustion characteristics with hydrogen contents of synthetic natural gas (SNG) in low swirl combustor. To investigate the effect of hydrogen contents for premixed SNG flame, stability map, CH chemiluminescence images, flame spectrum analysis and emission performances were measured. In the results, as the hydrogen content was increased, the lean flammable limit was expanded and the flame length was decreased. The hydrogen contents affected the flame liftoff height, and it has different tendency according to the equivalence ratio and flame shape. The change of height and length of flame according to hydrogen contents is caused by the fast burning velocity of hydrogen, which can be confirmed by GRI 3.0 reaction mechanism in PREMIX code. The intensity of $OH^*$, $CH^*$ and $C_2^*$ was confirmed by spectrum analysis of flame. As a result, the $CH^*$ intensity was not significantly different according to hydrogen content. The increase of hydrogen contents influenced positively CO and NOx emission performances.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.737-746
• /
• 2008

Numerical study is conducted to grasp preferential diffusion effects on flame characteristics in $H_2/CO$ syn-gas diffusion flames diluted with $CO_2$. The models of Sun et al. and David et al., which have been well known to be best-fitted for $H_2/CO$ synthetic mixture flames. are evaluated for $H_2/CO$ synthetic mixture flames diluted with $CO_2$. Comparison of flame structures with mixture-averaged species diffusion and suppression of the diffusivities of $H_2$ and H was made. The behaviors of maximum flame temperatures with those species diffusion models are not explained by scalar dissipation rate but by the nature of chemical kinetics. Importantly-contributing reaction steps to heat release rate are also compared for the three species diffusion models in $H_2/CO/CO_2$ flames with and without $CO_2$ dilution.