• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• Fire Science and Engineering
• /
• v.14 no.1
• /
• pp.8-12
• /
• 2000

We had investigated thermal and ignition behaviors of textiles. Decomposition of textiles with temperature was investigated using a DSC and the weight loss according to temperature using a TGA in order to find the thermal hazard of textiles, and the ignition behaviors of textiles according to species and permeation amount of oil. In addition, ignition behaviors of those permeated into oils indicating different iodine value and of those with arid without air in reaction vessel of measuring equipment were studied with constant temperature method among ignition temperature measuring methods. As results, the range of decomposition temperature of synthetic fiber was slightly broad compared with that of natural fiber, pure cotton. Besides, the initiation temperature of heat generation of both samples riced in the case of no air injection in the reaction vessel. On the other hand, in the case of air injection that was lowered according to the increase in permeative amount of oils and fats and decreased quickly as sample was permeated into drying oil.

• Journal of Fashion Business
• /
• v.14 no.6
• /
• pp.39-52
• /
• 2010

Interests in creating three-dimensionally designed fabric materials are growing rapidly in the sectors of the fashionable textiles with the creativity, new functions, and aesthetics. A number of finishing methods have been developed and proposed to add or create new functions and designs for silk fabrics. Due to the strong hydrogen bonds between the molecules of silk fibroins, the thermal treatment methods used in thermoplastic fiber processing, which can easily deform the synthetic filament fabrics to endow three-dimensional appearance to the fabrics, are not applicable to the silk fabric treatment. In order to modify the fine structure of silk fiber, neutral salt solution treatment methods have been suggested. In this study, the effect of the calcium nitrate solution on the physical and mechanical properties of silk fabrics was investigated by using the KES(Kawabata Evaluation System) equipment. Based on these findings, relationships between parameters, for example, the thickness and the compressional energy, the thickness and the compressional linearity, and the air permeability and the pore area statistical analysis were investigated. The relationships between the process parameters such as treatment temperature/time and the resulting fabric property parameters were also analyzed by using several SAS procedures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.51-58
• /
• 2020

The purpose of this study is to investigate experimentally the material strength and tensile deformation behavior of highly ductile high-strength cement composites reinforced by synthetic fibers. Materials and mixture proportions were designed to make composites with a strength level of 80 MPa in compression. Two kinds of polyethylene fibers with different properties were employed as reinforcing fibers. A series of experiments on density, compressive strength, and deformation performance was performed. Experimental results showed that the tensile behavior and cracking patterns of cement composite strongly depends on the types of reinforcing fibers. It was also demonstrated that the cement composite with a compressive strength of 77.7 MPa and a tensile strain capacity of 7.9% can be manufactured by using a proper polyethylene fiber.

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.16-31
• /
• 2023

Cultured meat is a potential sustainable food generated by the in vitro myogenesis of muscle satellite (stem) cells (MSCs). The self-renewal and differentiation properties of MSCs are of primary interest for cultured meat production. MSC proliferation and differentiation are influenced by a variety of growth factors such as insulin-like growth factors (IGF-1 and IGF-2), transforming growth factor beta (TGF-β), fibroblast growth factors (FGF-2 and FGF-21), platelet-derived growth factor (PDGF) and hepatocyte growth factor (HGF) and by hormones like insulin, testosterone, glucocorticoids, and thyroid hormones. In this review, we investigated the roles of growth factors and hormones during cultured meat production because these factors provide signals for MSC growth and structural stability. The aim of this article is to provide the important idea about different growth factors such as FGF (enhance the cell proliferation and differentiation), IGF-1 (increase the number of myoblasts), PDGF (myoblast proliferation), TGF-β1 (muscle repair) and hormones such as insulin (cell survival and growth), testosterone (muscle fiber size), dexamethasone (myoblast proliferation and differentiation), and thyroid hormones (amount and diameter of muscle fibers and determine the usual pattern of fiber distributions) as media components during myogenesis for cultured meat production.

• Animal Bioscience
• /
• v.36 no.12
• /
• pp.1918-1925
• /
• 2023

Objective: The objective of this study was to evaluate the effect of biogas slurry application on biomass production and the silage quality of corn. Methods: A field experiment was conducted in which corn was grown using different biogas slurry application rates. The effect of 25% to 500% biogas slurry nitrogen replacement (T1 to T14) on the yield and quality indices of corn were studied by field plot experiments. Results: The results revealed that biogas slurry application improved the stem diameter and relative feed value of corn silage in treatments T13 and T11. Moreover, the fermentation quality of corn silage was improved due to an increase in lactic acid content; in comparison with the chemical synthetic fertilizer (CF) group. The crude protein contents of corn silage had no obvious change with increasing biogas slurry application. However, the forage quality index of acid detergent fiber was decreased (p<0.05) in the T11 group compared with the CF group. In addition, higher (p<0.05) 30 h in vitro dry matter digestibility and 30 h in vitro neutral detergent fiber digestibility were observed in the T11 and T13 groups than in the CF group. Conclusion: Based on these results, it was concluded that the optimum biogas slurry application rate for corn was approximately 350% to 450% biogas slurry nitrogen replacement under the present experimental conditions.

• Food Science of Animal Resources
• /
• v.44 no.2
• /
• pp.284-298
• /
• 2024

Restructured meat (RM) products are gaining importance as an essential component of the meat industry due to consumers' interest in health benefits. RM products imply the binding or holding of meat, meat by-products, and vegetable proteins together to form a meat product with meat's sensory and textural properties. RM products provide consumers with diversified preferences like the intake of low salt, low fat, antioxidants, and high dietary fiber in meat products. From the point of environmental sustainability, RM may aid in combining underutilized products and low-valued meat by adequately utilizing them instead of dumping them as waste material. RM processing technique might also help develop diversified and new hybrid meat products. It is crucial to have more knowledge on the quality issues, selection of binding agents, their optimum proportion, and finally, the ideal processing techniques. It is observed in this study that the most crucial feature of RM could be its healthy products with reduced fat content, which aligns with the preferences of health-conscious consumers who seek low-fat, low-salt, high-fiber options with minimal synthetic additives. This review briefly overviews RM and the factors affecting the quality and shelf life. Moreover, it discusses the recent studies on binding agents in processing RM products. Nonetheless, the recent advancements in processing and market scenarios have been summarized to better understand future research needs. The purpose of this review was to bring light to the ways of sustainable and economical food production.

• Steel and Composite Structures
• /
• v.19 no.1
• /
• pp.153-171
• /
• 2015

Twelve large-scale composite deck slabs were instrumented and tested in a cantilever diaphragm configuration to assess the effect of fibers and welded wire mesh (WWM) on the in-plane shear capacity of composite deck slabs. The slabs were constructed with reentrant decking profile and reinforced with different types and dosages of secondary reinforcements: Conventional welded wire mesh (A142 and A98); synthetic macro-fibers (dosages of $3kg/m^3$ and $5.3kg/m^3$); and hooked-end steel fibers with a dosage of $15kg/m^3$. The deck orientation relative to the main beam (strong and weak) was also considered in this study. Fibers and WWM were found efficient in distributing the applied load to the whole matrix, inducing multiple cracking, thereby enhancing the strength and ductility of composite deck slabs. The test results indicate that fibers increased the slab's ultimate in-plane shear capacity by up to 29% and 50% in the strong and weak directions, respectively. WWM increased the ultimate in-plane shear capacity by up to 19% in the strong direction and 9% in the weak direction. The results suggest that discrete fibers can provide comparable diaphragm behavior as that with the conventional WWM.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.33-46
• /
• 2000

Uniform is the dress of distinctive design or fashion worn by members of a particular group or serving as a means of identification. The postman's uniform of Ministry of Communication should be distinctive or characteristic clothing to provide high functionality and symbolization of job characteristics, cost effectiveness and esthetic. In order to design the postman's new uniform available in 2000, there has been a satisfaction survey to 1,116 postmen. A thorough analysis of survey and informal and face-to-face discussion with postmen give the direction of design concept. One of the most important things in the design concept is to make the uniform high quality & refinement. The style is a refined jumper suit in consideration of form stability, wearing satisfaction, convenience in activity. The basic colors selected are navy and medium gray. The colors of jumper are MOC red ; C.I color Green : a representative color of youth, white : a symbolic color of bright future. All three colors are plaid on a basic nary color. In the selection of the textile, synthetic fiber (Polyester 65%, rayon 35%) equipped with UV cutting as well as water resistance etc. was recommended. In the uniform design process, the effective communication with user (postman) is critical to find the requirements and needs of uniform user (postman). Also. the uniform designer should reflect the above four key factors in design development. Therefore, the uniform should provide the user with high job performance and job pride in wearing the uniform.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.4
• /
• pp.431-441
• /
• 2011

Microbial colorants produced from Zooshikella sp. were developed as a reddish dye for fabrics. The reddish colorants were extracted from cell mass of Zooshikella sp. using 100% ethanol and were identified as prodiginine by 1H-NMR and FT-IR analysis. Microbial prodiginine had a maximum spectrophotomatric absorbance at 530nm and were chemically stable and 30 to $60^{\circ}C$. The microbial prodiginine could dye natural fibers such as cotton, silk, and wool as well as synthetic fibers such as nylon. The maximum K/S values of the dyed fiber were shown at 540 run with a color appearance of RP (reddish purple). Silk and nylon had an excellent dyeability among the experimental fibers. The optimum pH for the dyeing of experimental fibers was at pH 3.0 and dyeability was improved as the temperature increased. The cover change of dyed multifiber fabrics with the microbial prodiginine were measured after washing with detergents and a dry cleaning solvent for the selection of a proper fabric against microbial prodiginine. Among the experimental fibers, silk and nylon did not show significant color change after washing. Therefore, under the criteria of dyeability, silk and nylon were excellent fabrics for being dyed by microbial prodiginine.