• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.461-469
• /
• 2011

이 연구에서는 하이브리드 구조용 합성 섬유와 폴리비닐알코올(PVA)섬유 보강 시멘트 복합 재료에 정착된 구조용 합성 섬유의 인발 거동에 미치는 PVA 섬유 혼입률의 효과를 제시하였다. 구조용 합성 섬유와 하이브리드 섬유보강 시멘트 복합 재료와의 인발 거동은 Dog-bone 부착 시험에 의해서 결정하였다. 시험 결과 PVA 섬유의 혼입은 구조용 합성 섬유와 시멘트 복합 재료와의 인발 거동 특히, 섬유 계면인성을 강화하는 효과가 있었다. 구조용 합성 섬유의 인발 시험 결과 구조용 합성 섬유와 시멘트 복합 재료와의 계면인성은 PVA 섬유의 혼입률이 증가할수록 증가하였다. 미세 구조 분석 결과 PVA 섬유의 혼합은 구조용 합성 섬유와 PVA 섬유 보강 시멘트 복합 재료의 계면인성 메커니즘을 강화시키는데 효과적이라는 것을 확인할 수 있었다.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.51-62
• /
• 2008

The purpose of this study was to check color change depending on dyeing conditions when silk fabrics was dyed with gromwell and to investigate mordant effect when synthetic tannin was used as a mordant. First, when silk fabrics were dyed with gromwell, the change of color, brightness and chroma were examined by measuring K/S value, a, b value, L value and C value depending on dyeing condition. Second, color, brightness and chroma differences which appeared after mordanting with synthetic tannin were investigated and muti-functional mordanting effect was confirmed with dyeing fastness, antibiosis. As a result of color analysis of gromwell, it was proved that the main pigment of gromwell was shikonin. Color was red purple at pH 3 when silk fabrics were dyed with gromwell. But It became greenish and bluish as temperature rose and time passed by. And it grew reddish and yellowish as concentration level reached higher. The color became purple at pH 5 and purple blue at pH 7. Both at pH 5 and pH 7, it became greenish and yellowish, as temperature went up and time ran by. And it became reddish with concentration increasing. Brightness and chroma decreased with temperature and concentration increasing as well as time passing by. After mordanting with synthetic tannin, the color became less reddish at pH 3 and reddish-yellowish at pH 5 and pH 7. The brightness increased and the chroma decreased. At all pH, the color, the brightness and the chroma became similarly by synthetic tannin mordanting. Dyeing fastness of synthetic tannin mordanted fabric was higher than that of non-mordanted fabric. Especially, wet fastness at pH 3 improved from 1 grade before synthetic tannin mordanting to $3{\sim}4$ grade after tannin mordanting. Antibiosis was improved by gromwell dyeing and synthetic tannin mordanting.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.14-21
• /
• 2008

Synthetic gas is defined as reformed gas from hydrocarbon-based fuel and the major chemical species of the synthetic gas are $H_2$, CO and $N_2$. Among them, hydrogen from synthetic gas is very useful species in chemical process such as combustion. It is a main reason that many studies have been performed to develop an effective reforming device. Furthermore, other technologies have been studied for synthetic gas application, such as the ESGI(Exhaust Synthetic Gas Injection) technology. ESGI injects and burns synthetic gas in the exhaust pipe so that heat from hydrogen combustion helps fast warmup of the close-coupled catalyst and reduction of harmful emissions. However, it is very hard to understand combustion characteristic of hydrogen under low oxygen environment and complicated variation in chemical species in exhaust gas. This study focuses on the characteristics of hydrogen combustion under ESGI operating conditions using a CVC(Constant Volume Chamber). Measurements of pressure variation and flame speed have been performed for various oxygen and hydrogen concentrations. Results have been analyzed to understand ignition and combustion characteristics of hydrogen under lower oxygen conditions. The CVC experiments showed that under lower oxygen concentration, amount of active chemicals in the combustion chamber was a crucial factor to influence hydrogen combustion as well as hydrogen/oxygen ratio. It is also found that increase in volume fraction of oxygen is effective for the fast and stable burning of hydrogen by virtue of increase in flame speed.

• 한국시뮬레이션학회논문지
• /
• 제22권3호
• /
• pp.7-14
• /
• 2013

본 논문에서는 항공전장 환경의 구축을 통한 항공 무기체계의 가상시험에 환경적 영향을 반영하여 모의할 수 있도록 환경데이터를 제공하기 위한 내용을 수행하였다. 항공 전투 시뮬레이션에서 전투 개체들이 모의하는 작전은 환경 영향에 의하여 그 달성 결과가 달라져야 한다. 본 연구에서는 항공 전투 시뮬레이션 시스템에 합성전장환경 구축을 위해, 실제 항공 전장환경을 분석하여 합성전장환경을 설계한다. 설계한 합성전장환경의 구현을 위해 적합한 실제 환경 데이터를 수집하고, 수집된 환경데이터를 기반으로 합성전장환경 구축을 위해 공간 보간법(GIS, Geographic information system interpolation)을 활용하여 데이터를 가공한다. 본 논문의 최종 목적은 항공 전투 시뮬레이션에 환경 영향을 반영하기 위해 대기 환경 속성의 스펙트럼 중 시뮬레이션에서 요구하는 속성을 도출하여 합성전장환경을 설계하고, 실제 대기 데이터를 기반으로 설계된 합성전장환경을 구현한다. 구현된 합성전장환경을 분산 시뮬레이션 시스템에서 환경 데이터 요구에 대해 전장환경 데이터를 제공하여 시뮬레이션 시스템이 실제 환경 데이터에 기반한 합성전장환경을 시뮬레이션에 반영할 수 있게 한다.

• Journal of Plant Biotechnology
• /
• 제48권4호
• /
• pp.255-263
• /
• 2021

Paederia foetida L. is an important medicinal plant that has been used for the treatment of various gastrointestinal related ailments by different tribal communities in India. This plant is also known for its use as a food. Due to overexploitation, P. foetida has been classified as a vulnerable plant in some states of India. The propagation of P. foetida by conventional methods is easy but very slow. Synthetic seed technology offers incredible potential for in vitro propagation of threatened and commercially valuable plants, and can also facilitate the storage and exchange of axenic plant material between laboratories. However, synthetic seed production for P. foetida has not yet been reported. Thus, to the best of our knowledge, the present study is the first attempt to produce synthetic seeds of P. foetida by calcium alginate encapsulation of in vitro regenerated axenic nodal segments. Sodium alginate (3%) and CaCl₂ (100 mM) were found to be the optimal materials for the preparation of ideal synthetic seeds, both in terms of morphology and germination ability. The synthetic seeds showed the best germination (formation of both shoot as well as root; 83.3%) on ½ MS medium augmented with 0.5 mg/L indole-3-acetic acid. The plantlets obtained from these synthetic seeds could be successfully acclimatized under field conditions. We also studied the storage of these synthetic seeds at low temperature and their subsequent sprouting/germination. The seeds showed a germination rate of 63.3% even after 21 days of storage at 4 ℃; thus, they could be useful for transfer and exchange of P. foetida germplasm.

• Mycobiology
• /
• 제46권4호
• /
• pp.407-415
• /
• 2018

Pheromone (PHB)-receptor (RCB) interaction in the mating pheromone response pathway of Lentinula edodes was investigated using synthetic PHBs. Functionality of the C-terminally carboxymethylated synthetic PHBs was demonstrated by concentration-dependent induction of a mating-related gene (znf2) expression and by pseudoclamp formation in a monokaryotic strain S1-11 of L. edodes. Treatment with synthetic PHBs activated the expression of homeodomain genes (HDs) residing in the A mating type locus, and of A-regulated genes, including znf2, clp1, and priA, as well as genes in the B mating type locus, including pheromone (phb) and receptor (rcb) genes. The synthetic PHBs failed to discriminate self from non-self RCBs. PHBs of the B4 mating type (B4 PHBs) were able to activate the mating pheromone response pathway in both monokaryotic S1-11 and S1-13 strains, whose B mating types were B4 (self) and B12 (non-self), respectively. The same was true for B12 PHBs in the B4 (non-self) and B12 (self) mating types. The synthetic PHBs also promoted the mating of two monokaryotic strains carrying B4-common incompatible mating types ($A5B4{\times}A1B4$). However, the dikaryon generated by this process exhibited abnormally high content of hyphal branching and frequent clamp connections and, more importantly, was found to be genetically unstable due to overexpression of mating-related genes such as clp1. Although synthetic PHBs were unable to discriminate self from non-self RCBs, they showed a higher affinity for non-self RCBs, through which the mating pheromone response pathway in non-self cells may be preferentially activated.

• 분석과학
• /
• 제34권4호
• /
• pp.160-171
• /
• 2021

Synthetic azo dyes are used extensively in herbal medicines to render the medicines more visually attractive to consumers. This study developed and validated a rapid high-performance liquid chromatography (HPLC) method to determine whether synthetic colorants such as Tartrazine, Auramine O, Metanil yellow, Sunset yellow, and Orange II are used extensively in Typha orientalis. To increase the recovery of the synthetic dyes, this method employed containing 50 mM ammonium acetate in 70 % methanol at first extraction and 100 mM HCl in 70 % methanol at second extraction. Five synthetic pigments in Typha orientalis were separated by gradient elution with a mobile phase consisting of acetonitrile and 50 mM ammonium acetate in distilled water at ultra-violet (UV) detection 428 nm or 500 nm. Additionally, this study established the liquid chromatography tandem mass spectrometry (LC-MS/MS) method to confirm positive samples suspected by HPLC results. The HPLC-UV method had good linearity, indicating r²> 0.999. The recoveries of the samples spiked with three different concentration ranged from 73.8~91.5 %, and relative standard deviation values indicated 0.2~5.2 %. The established LC-MS/MS could successfully identify the synthetic pigments in herbal medicine samples. The study demonstrates that Typha orientalis adulterated by yellowish synthetic dyes can be successfully distinguished when using the HPLC-UV method.

• 천문학회보
• /
• 제46권1호
• /
• pp.43.1-43.1
• /
• 2021

In this study, we suggest a new method to estimate the mass of a halo coronal mass ejection (CME) using synthetic CMEs. For this, we generate synthetic CMEs based on two assumptions: (1) the CME structure is a full ice-cream cone, (2) the CME electron density follows a power-law distribution (ρ_cme=ρ₀r^-n). The power-law exponent n is obtained by minimizing the root mean square error between the electron number density distributions of an observed CME and the corresponding synthetic CME at a position angle of the CME leading edge. By applying this methodology to 57 halo CMEs, we estimate two kinds of synthetic CME mass. One is a synthetic CME mass which considers only the observed CME region (M_cme1), the other is a synthetic CME mass which includes both the observed CME region and the occulted area larger than 4 solar radii (M_cme2). From these two cases, we derive conversion factors which are the ratio of a synthetic CME mass to an observed CME mass. The conversion factor for M_cme1 ranges from 1.4 to 3.0 and its average is 2.0. For M_cme2, the factor ranges from 1.8 to 5.0 with the average of 3.0. These results imply that the observed halo CME mass can be underestimated by about 2 times when we consider the observed CME region, and about 3 times when we consider the region including the occulted area. Interestingly these conversion factors have a very strong negative correlation with angular widths of halo CMEs.We also compare the results with the CME mass estimated from STEREO observations.

• 한국의학물리학회지:의학물리
• /
• 제33권4호
• /
• pp.142-149
• /
• 2022

Purpose: This study seeks to compare the dosimetric parameters of the bulk electron density (ED) approach and synthetic computed tomography (CT) image in terms of position variation of the air cavity in magnetic resonance-guided radiotherapy (MRgRT) for patients with pancreatic cancer. Methods: This study included nine patients that previously received MRgRT and their simulation CT and magnetic resonance (MR) images were collected. Air cavities were manually delineated on simulation CT and MR images in the treatment planning system for each patient. The synthetic CT images were generated using the deep learning model trained in a prior study. Two more plans with identical beam parameters were recalculated with ED maps that were either manually overridden by the cavities or derived from the synthetic CT. Dose calculation accuracy was explored in terms of dose-volume histogram parameters and gamma analysis. Results: The D_95% averages were 48.80 Gy, 48.50 Gy, and 48.23 Gy for the original, manually assigned, and synthetic CT-based dose distributions, respectively. The greatest deviation was observed for one patient, whose D_95% to synthetic CT was 1.84 Gy higher than the original plan. Conclusions: The variation of the air cavity position in the gastrointestinal area affects the treatment dose calculation. Synthetic CT-based ED modification would be a significant option for shortening the time-consuming process and improving MRgRT treatment accuracy.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.273-279
• /
• 2023

Objectives: Objectives of this study were: 1) to introduce industrial situation and health hazards of synthetic fiber, 2) to review a case of chronic obstructive pulmonary disease in a worker exposed to synthetic fiber reported to the Korea Occupational Disease Surveillance Center, and 3) to suggest supplementary measures for the occupational health system for workers exposed to synthetic fibers. Methods: Respiratory exposure, health hazards, and exposure standards for synthetic fiber dust in Korea and other countries were reviewed. In addition, a case of chronic obstructive pulmonary disease due to exposure to nylon dust reported to the Korea Occupational Disease Surveillance Center was reviewed and summarized. Results: The worker was a 53-year-old non-smoking male who had been involved in the nylon weaving process for 26 years. He had shortness of breath from three years ago. He was diagnosed with chronic obstructive pulmonary disease. PM1.0, PM_2.5, and PM10 were measured at 26.6 ㎍/m³, 48.2 ㎍/m³, and 91.7 ㎍/m³, respectively. Fiber components estimated as nylon fiber were detected in the microscopic examination of a solid sample. Conclusions: For workers exposed to synthetic fiber dust, special health examinations of the respiratory system, regular work environment measurement, and work environment management through workplace health management should be performed. It is necessary to research on health effects of synthetic fibers.