• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.130-133
• /
• 2007

In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.

• 대한수의학회지
• /
• 제37권3호
• /
• pp.639-645
• /
• 1997

The objectives of the present study were improvements in the efficiency of developmental rates to morula and blastocyst stages to produce a large number of genetically identical nuclear transplanted embryos. The oocytes collected from slaughterhouse ovaries were matured 24h in TCM199+10% FBS and exposed to $39^{\circ}C$ or room temperature to allow cytoplasmic maturation and gain activation competence. Donor embryos were treated for 12h with $10{\mu}g/ml$ nocodazole or $0.05{\mu}g/ml$ demicolcine to synchronize the cell cycle stage at 26h after the onset of culture. The blastomeres and recipient oocytes were fused by electrofusion. The cloned embryos were then cultured in various conditions to allow further development. In the treatment of oocyte activation and cell cycle regulation of donor nuclei, the room temperature exposure and nocodazole treatment group had significant effect on the developmental rates to morula/blastocyst(21.7% vs 12.1~16.7%), but had no significant effect on the fusion rates between donor blastomeres and recipient oocytes. The developmental rates of bovine nuclear transplanted embryos appeared to be higher significantly in mTALP medium under 5% $O_2$ condition and in TCM199 with bovine oviduct epithelial cell under 20% $O_2$ condition(22.2%) than other groups. In embryo transfer of nuclear transplanted embryos, there were no significant differences in calving rates between the use of excellent and good grade donor embryos.

• 방송공학회논문지
• /
• 제8권1호
• /
• pp.63-71
• /
• 2003

실시간 가상이미징 시스템은 스포츠 중계 방송에서 팀의 문양이나 점수, 거리와 같은 정보를 실제 운동장 위에 합성해 줌으로써, 일반적인 자막기의 단점을 보완할 수 있는 새로운 기술로 주목받고 있다. 카메라의 움직임에 그래픽을 정확히 연동시키기 위해서는 카메라의 각 축에 센서를 장착하는 방식과 실제 카메라 영상 자체를 분석하는 방식이 사용된다. KBS 기술연구소에서는 방송용 렌즈 기 줌(zoom), 포커스(focus) 부와 팬(Pan), 틸트(tilt) 축에 센서를 부착하여, 실시간으로 3차원 그래픽의 가상 카메라를 제어하는 센서기반 가상이미징 시스템 'VIVA'를 개발하였다. 본 논문에서는 VIVA 시스템과 그 구현 기술을 소개하고자 한다. 정확한 카메라 추적을 위하여 주밍(zooming)시 발생하는 카메라 시점(view-point)의 이동을 렌즈의 광학주점 변이 데이터를 이용하여 계산하였으며, 줌 뿐만 아니라 포커스에 따른 화각 변화를 반영하였다. 3차원 그래픽에 기반하여 가상 이미징 시스템을 구현함으로써, 키프레임(keyframe) 애니메이션과 같은 유용한 그래픽 기술이 사용될 수 있도록 하였다. VIVA는 2002년 부산 아시안게임과 대선 개표 방송에 사용되어, 스포츠 프로그램뿐만 아니라 근거리 촬영이 요구되는 스튜디오 프로그램 제작에도 사용이 가능함을 확인하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1999년도 춘계 학술대회지
• /
• pp.162-163
• /
• 1999

The goal of this research was (1) to describe the conditions and parameters required for the cell cycle synchronization and the accumulation of large number of metaphase cells in maize and other cereal root tips, (2) to isolate intact metaphase chromosomes from root tips suitable for characterization by flow cytometry, and (3) to construct chromosome-specific libraries from maize. Plant metaphase chromosomes have been successfully synchronized and isolated from many cereal root-tips. DNA synthesis inhibitor (hydroxyurea) was used to synchronize cell cycle, follwed by treatement with trifluralin to accumulate metaphase chromosomes. Maize flow karyotypes show substantial variation among inbred lines. thish variation should be sueful in isolating individual chromosome types. In addition, flow cytometry is a useful method to measure DNA content of individual chromosomes in a genotyps, and to detect chromosomal variations. Individual chromosome peaks have been sorted from the maize hybrid B73/Mol7. Libraries were generated form the DOP-PCR amplification product from each peak. To date, we have analyzed clones from a library constructed from the maize chromosome 1 peak. Hybridization of labeled genomic DNA to clone inserts indicated that $24\%,\;18\%,\;and\;58\%$ of the clones were highly repetitive, medium repetitive, and low copy, respectively. Fifty percent of putative low cpoy clones showed single bands on inbred screening, blots, and the remaining $50\%$ were low copy repeats. Single copy clones showing polymorphism will be mapped using recombinant inbred mapping populations. Repetitive clones are being characterized by Southern blot analysis, and will be screened by in situ hybridization for their potential utility as chromosome specific markers.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.43-53
• /
• 2006

Among several movements that occurred upon a slope, golf swing is the most typical one because environmental conditions dynamically vary with many kinds of slopes. Some studies on the golf swing were performed about a weight transfer on flatland, however, there couldn't be seen any study about the weight transfer on slope elsewhere. Therefore, the purpose of this study was to provide quantified data to objectively test the coaching words and keys about the weight transfer at sidehill slope during goal impact EspeciaIly sidehill Slopes with ball above the feet. Four highschool golfer, who have average handy 5, were recruited for this study. Plantar pressure distribution and cinematographic data were collected during golf swing in the conditions of flatland, $5^{\circ}$, $10^{\circ}$ and $15^{\circ}$sidehill slope simultaneously. The two data were used to synchronize the two data later. The plantar regions under the foot were divided into 8 regions according to the directly applied pressure pattern of the subject to insole sensor. The 8 foot regions were hullux, medial forefoot, central forefoot, lateral forefoot, medial midfoot, lateral midfoot, medial heel, and lateral heel. And the plantar pressure data was also divided into four movement address, phases-backswing. downswing, and follow-through phases according to the percentage shown to the visual information of film data. Based on the investigations on public golf books and experiences of golfers, it was hypothesized by the authors in the early of this study that the steeper slopes are, the more weight loads on left foot that positions at the higher place. When observing the results of plantar pressure and vertical force curves according to the sidehill slope conditions, the hypothesis could be accepted.

• 한국통신학회논문지
• /
• 제38B권5호
• /
• pp.355-367
• /
• 2013

3GPP와 WiMAX의 Policy and Charging Control(PCC) 표준에서는 정책제어 시스템(Policy and Charging Rule Function, PCRF)이 정책적용 시스템(Policy and Charging Rule Enforcement Function, PCEF)에 품질 및 과금 정책을 설정하고 관리함으로써 네트워크 자원을 제어하는 아키텍처를 정의한다. 본 논문은 PCRF 시스템과 PCEF 시스템 사이에서 정책 정보 불일치로 인해 발생하는 오류의 유형을 규정하고, 각 오류의 유형에 따라 PCRF 시스템의 정책 정보와 PCEF 시스템의 정책 정보를 동기화 시키는 방법을 제안한다. 그리고 WiMAX 표준을 준용하여 한국에 구축된 WiBro 시스템에서 각 기지국의 mobile VoIP(mVoIP) 수용량 관점에서 제안한 방법의 성능을 정량적으로 분석하였다. 제안한 방법은 삭제되지 않은 정책 정보로 인한 네트워크 자원의 낭비를 줄이고, 불필요한 정보의 누적으로 인해 발생하는 시스템의 부하, 메모리 누수, 시스템 정지 등과 같은 문제점들을 방지하고, PCC 서비스를 안정적으로 유지시켜 줌으로써 시스템의 성능을 향상시킨다. 우리는 이 방법을 실제 구현을 통하여 검증하였으며, WiMAX 표준에 반영시켰다.

• 융합신호처리학회논문지
• /
• 제10권3호
• /
• pp.193-197
• /
• 2009

본 논문에서는 신뢰도와 내구성이 보장되어 차량용 바디 제어기에 많이 사용되는 16bit 마이크로 컨트롤러인 XC2287에 ${\mu}C/OS-II$를 이식하고 차량의 전자제어 액츄에이터롤 많이 사용되는 모터로 시스템을 구성하여 실시간 운영체제 기반의 모터구동시스템을 구현한다. 구현한 실시간 모터구동시스템은 XC2287 마이크로 컨트롤러의 범용입출력 포트로부터 펄스폭 변조 신호를 출력하고 드라이버 회로를 통해 증폭된 신호가 DC모터에 인가된다. 사용자는 XC2287에 장착된 전위차계를 조작하여, 포트로부터 출력되는 펄스폭을 조절하고, 이를 통해 DC모터의 속도를 제어하고 출력된 신호를 모니터링 한다. 전위차계 조작에 의한 입력과정과 펄스폭 변조 신호 출력과정을 세마포어를 이용하여 동기화하는 실험을 통하여 ${\mu}C/OS-II$ 이 올바르게 이식되었는지를 검증한다.

• 한국인터넷방송통신학회논문지
• /
• 제9권3호
• /
• pp.69-74
• /
• 2009

무선 채널은 유선 채널과 달리 시간적 공간적으로 지속적으로 변화하는 특성을 가지고 있으며 이는 네트워크의 성능 변화에도 많은 영향을 미치고 있다. 이러한 채널의 변화에 대응하여 네트워크의 성능을 향상하고자 하는 노력이 많이 이루어져 왔으며 이는 지역 통신으로 각광받고 있는 Wi-Fi도 예외는 아니다. 기존의 Wi-Fi 네트워크에서의 채널에 적응하여 역동적 속도 조절방식은 Flat-fading에 기반을 두어 이루어져 왔으나 대부분의 Wi-Fi 네트워크가 Indoor상황에서 이루어지기에 오히려 Frequency selective한 채널에 대응하는 방식의 속도 조절 방식이 요구되어지고 있다. 그러나 이러한 방식은 지속적으로 변화하는 채널에 적응하기에는 너무나 큰 overhead를 만들어 옴에 따라 적용되지 못하고 있었다. 본 논문에서는 각 sub-carrier별로 다양한 Rate를 적용할 수 있는 Layer-2 protocol을 제안한다. 제안된 프로토콜은 기존의 sub-carrier별 속도 조절시에 문제시 되는 overhead 의 증가문제를 단 한 개의 OFDM 심벌을 추가함으로써 혁신적으로 개선할 수 있었고 이를 통하여 네트워크의 성능 향상을 가져오게 되었다. 제안된 프로토콜은 simulation과정을 통하여 그 성능의 우월성을 입증하였다.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.211-220
• /
• 2017

The application of the theoretical model to real assembly lines has been one of the biggest challenges for researchers and industrial engineers. There should be some realistic approach to achieve the conflicting objectives on real systems. Therefore, in this paper, a model is developed to synchronize a real system (A discrete event simulation model) with a theoretical model (An optimization model). This synchronization will enable the realistic optimization of systems. A job assignment model of the assembly line is formulated for the evaluation of proposed realistic optimization to achieve multiple conflicting objectives. The objectives, fluctuation in cycle time, throughput, labor cost, energy cost, teamwork and deviation in the skill level of operators have been modeled mathematically. To solve the formulated mathematical model, a multi-objective simulation integrated hybrid genetic algorithm (MO-SHGA) is proposed. In MO-SHGA each individual in each population acts as an input scenario of simulation. Also, it is very difficult to assign weights to the objective function in the traditional multi-objective GA because of pareto fronts. Therefore, we have proposed a probabilistic based linearization and multi-objective to single objective conversion method at population evolution phase. The performance of MO-SHGA is evaluated with the standard multi-objective genetic algorithm (MO-GA) with both deterministic and stochastic data settings. A case study of the goalkeeping gloves assembly line is also presented as a numerical example which is solved using MO-SHGA and MO-GA. The proposed research is useful for the development of synchronized human based assembly lines for real time monitoring, optimization, and control.

• 천문학논총
• /
• 제22권4호
• /
• pp.189-199
• /
• 2007

In this paper, we describe the proposed KVN (Korean VLBI Network) clock system in order to make the observation of the VLBI effectively. In general, the GPS system is widely used for the time information in the single dish observation. In the case of VLBI observation, a very high precise frequency standard is needed to perform the observation in accordance with the observation frequency using the radio telescope with over 100km distance. The objective of the high precise clock system is to insert the time-tagging information to the observed data and to synchronize it with the same clock in overall equipments which used in station. The AHM (Active Hydrogen Maser) and clock system are basically used as a frequency standard equipments at VLBI station. This system is also adopted in KVN. The proposed KVN clock system at each station consists of the AHM, GPS time comparator, standard clock system, time distributor, and frequency standard distributor. The basic experiments were performed to check the AHM system specification and to verify the effectiveness of implemented KVN clock system. In this paper, we briefly introduce the KVN clock system configuration and experimental results.