• The KIPS Transactions:PartA
• /
• 제11A권1호
• /
• pp.37-48
• /
• 2004

The SyncML, the standard synchronization protocol, supports the synchronization of various application services between a client and a server such as an address book, a calendar. Even with this standard protocol, SyncML application developers usually spend a long time and efforts implementing service specific logics and databases. This paper designed and implemented the SDE(Service Development Environment) which is an integrated development environment for SyncML server developers to develop an application service rapidly and correctly. The SDE consists of two components i.e., the Sync Library and the SEG(Sync Engine Generator) tool. To prove the applicability of this study we implemented a SyncML server by using the SDE and also carried out the correctness tests and the performance test. We hope this system helps developers implement mobile application services more efficiently.

• Journal of IKEEE
• /
• 제27권3호
• /
• pp.273-279
• /
• 2023

The use of line memory is essential for image filtering in image processing hardware. After input data is stored in line memory, filtering is performed after synchronization to use the stored data. A sync generator is used for synchronization, and in the case of a conventional sync generator, the input sync signal is delayed by one row of the input image. If a signal delayed by two rows is required, it is necessary to connect two modules. This approach increases the size of the hardware and cannot be designed efficiently. In this paper, we propose a sync generator that generates multiple types of delayed signals by adding a finite state machine. The hardware design was coded in Verilog HDL, and performance is verified by applying it to image processing hardware using field programmable gate array board.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• 제55권4호
• /
• pp.163-171
• /
• 2006

This paper presents a definition of sync phenomenon occurring in power systems, and describes the characteristics of sync in basic electric circuits. In addition, sync observed in basic circuits was extended to the analysis of dynamic characteristics in power systems. This paper, moreover, describes the sync occurring among system outputs from time domain simulation for two-area systems. In power systems, sync is a common phenomenon that is always observed among generator powers or bus voltages. Thus, we can use sync to obtain the characteristics of power systems without being bound to a specific operating point. Sync can be useful information in power system operation and planning.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제58권7호
• /
• pp.1255-1262
• /
• 2009

The present study explained the phenomenon that low frequency oscillation is synchronized with discrete data obtained from a wide area system, and a sync search method. When a disturbance occurs in an power system, various controllers operate in order to maintain synchronization. If the system's damping is poor, low frequency oscillations continue for a long time and the oscillations are synchronized with one another at specific frequency. The present study estimated dominant modes, magnitude and phase of signals by applying parameter estimation methods to discrete signals obtained from an power system, and performed sync search among wide area signals by comparing the estimated data. Sync search was performed by selecting those with the same frequency and damping constant from dominant oscillation modes included in a large number of signals, and comparing their magnitude and phase. In addition, we defined sync indexes in order to indicate the degree of sync between areas in a wide area system. Furthermore, we proposed a wide area sync search method by normalizing mode magnitude in discrete data obtained from critical generator of the wide area. By applying the sync search method and sync indexes proposed in this study to two area systems, we demonstrated that sync scanning can be performed for discrete signals obtained from power systems.

• Journal of Sensor Science and Technology
• /
• 제22권1호
• /
• pp.84-88
• /
• 2013

In this paper, the low price signal generator with capability of frequency high-resolution and variable sync pulse has implemented. It fulfils well the requirements for SS-OCT of the frequency resolution less than 1Hz, frequency stability of ${\leq}{\pm}0.5Hz$/10 min and variable sync pulse output timing. Through its performance test applied to wavelength swept laser, 120 nm sweeping range and 10 mW average optical power were obtained. This shows that the realized sine-wave generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 한국방송∙미디어공학회 2016년도 하계학술대회
• /
• pp.384-387
• /
• 2016

본 논문에서는 4K UHD 방송장비 중 디스플레이기기와 인코더의 성능 시험을 위해 개발된 패턴 발생장비를 소개하고 있다. 패턴의 제작 및 재생 방법에 따라 표출되는 패턴의 종류를 그래픽/실사, 정지/동영상으로 구분할 수 있는데 본 논문에서는 모션블러, 모션져더, AV lip sync, 텍스트 주변 인코딩 화질 열화 확인, 화이트 노이즈, 프레임 누락, HDR 확인, 지연시간 측정, 계단현상 확인, 이미지 스티킹 등 그래픽 동영상 패턴에 대해 각각의 제작 의도를 설명하고 이를 통해 디스플레이기기와 인코더의 성능을 평가하는 방법에 대한 간략한 소개와 개발된 패턴발생장비의 입출력 사양을 제시하고 있다.

• Journal of Advanced Navigation Technology
• /
• 제11권2호
• /
• pp.163-169
• /
• 2007

In this paper, we propose a method of trigger pulse generation to capture the image on time by making a synchronization between the x-ray generator and digital x-ray image acquisition system. we designed a wireless trigger pulse generation circuit to make a synchronization between x-ray generator and digital image acquisition system and analysis its performance. When it starts to detect a certain level of x-ray radiation or above from the air, this method starts to generate a ACQ_START signal to indicate the timing for image acquisition starting from digital image acquisition system. Hence, when it starts to detect under certain level of x-ray signal from the air, this method starts to generate a ACC_END signal to indicate the timing for image acquisition stop from digital image acquisition system. Image acquisition is activated only this time between ACQ_START and ACQ_END signal. By doing this wireless detecting of x-ray signal from remote, we can get more accurate timing for capturing the x-ray image and any type of x-ray generator can be connected to digital image acquisition system, regards of wired protocol. This makes easy installation. We could get 3.5 line pair / mm resolution at 20 mAs of x-ray level with resolution chart. This is same or better image comparing to conventional wired result.