• Journal of Navigation and Port Research
• /
• v.30 no.7
• /
• pp.607-610
• /
• 2006

A new compact microstrip low-pass filter and its equivalent-circuit model are developed. The philosophy of the structure behind this novel microstrip low-pass filter is simple as it is composed of a pair of symmetrical parallel coupled-line and an open-stub. With this configuration, a finite attenuation pole near the stopband cutoff frequency is available and adjustable by simply tuning the circuit parameters. Furthermore, the rejection bandwidth of this type of low-pass filter can be extended. In order to validate the feasibility of the proposed design method, a low-pass filter based on a microstrip structure is designed, fabricated, and measured. Experimental results agree very well with the simulation and analytical results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.121-126
• /
• 2022

This study is about an antenna implemented in the form of a monopole having a hexagonal symmetric pattern by simplifying the modified Hilbert curve fractal monopole structure. The modified Hilbert curve fractal monopole structure was simplified and miniaturized, and the radiator was implemented in a hexagonal symmetrical pattern to improve performance. The dielectric constant of substrate is 4.7, and the total line length with a meander-shaped symmetrical structure is 59 mm. The size of the antenna is 10 mm × 10 mm × 0.8 mm, and the line width is 0.4 mm. The size of the antenna measuring jig is 64 mm × 21 mm × 1 mm. The resonant frequency is 1.57 GHz, and the frequency range is 1.51 to 1.615 GHz. The frequency bandwidth is 105 MHz. As for the antenna gain, the measurement gain of the YZ-plane was 2.32 dBi, and that of the XZ-plane was -1.03 dBi. As a result, we confirmed that antenna miniaturization is possible using a hexagonal symmetric pattern fractal structure. In addition, we confirmed that the antenna performance can be easily improved by changing the structure of the radiator.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1219-1226
• /
• 2017

This paper presents the hybrid stepping machine for linear oscillating generators. The focus of the work is the suggestion of the improved model through the comparison of proposed models ; new flux concentrating PMs mover of the hybrid stepping generator is proposed based on the symmetrical and non-symmetrical stator cores of the surface mounted PMs mover, and non-slanted PMs and slanted PMs of the flux concentrating PMs mover. It is achieved using equivalent magnetic circuit considering leakage elements. Finally, this study suggests new hybrid stepping structure of linear oscillating generator.

• Advances in nano research
• /
• v.3 no.1
• /
• pp.49-54
• /
• 2015

The structure represents symmetrical metal electrode (gate 1) - front $SiO_2$ layer - n-Si nanowire FET - buried $SiO_2$ layer - metal electrode (gate 2). At the symmetrical gate voltages high conductive regions near the gate 1 - front $SiO_2$ and gate 2 - buried $SiO_2$ interfaces correspondingly, and low conductive region in the central region of the NW are formed. Possibilities of applications of nanosize FETs at the deep inversion and depletion as a distributed capacitance are demonstrated. Capacity density is an order to ${\sim}{\mu}F/cm^2$. The charge density, it distribution and capacity value in the nanowire can be controlled by a small changes in the gate voltages. at the non-symmetrical gate voltages high conductive regions will move to corresponding interfaces and low conductive region will modulate non-symmetrically. In this case source-drain current of the FET will redistributed and change current way. This gives opportunity to investigate surface and bulk transport processes in the nanosize inversion channel.

• Communications of the Korean Mathematical Society
• /
• v.10 no.3
• /
• pp.689-698
• /
• 1995

The purpose of this paper is to introduce a new fuzzy semi-topogenous order which agrees with the fuzzy points and investigate some properties of this order and define a fuzzy proximity structure by using this order.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.401-404
• /
• 2002

This paper proposes a new symmetrical bandpass filter based on capacitive loading with a coplanar waveguide (CPW) structure. The filter was numerically designed at the operating frequency around 2 ㎓ by using IE3D software package. The characteristics of the proposed filter were then measured which the results were in good agreement with simulation. The passband insertion loss was considerably low (~3 ㏈) and the return loss was high (greater than 10 ㏈). The size of the proposed filter was also decreased approximately 50% when comparing with the fitters using conventional transmission lines.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.513-520
• /
• 2002

This study is for seismic analysis of building structures with ambiguous modal direction This case is revealed symmetrical building structure or the structure that isn't coincided building axis with physical axis. Seismic analysis-time history analysis, response spectrum analysis and lateral force procedure-is carried out. It is concluded that analysis method for the structure with ambiguous modal direction don't suitable for lateral force procedure. It is recommended to use the CQC method for combining modal responses to the individual components and the SRSS rule for combining responses to the two horizontal components are of nearly equal intensities.

• 전자공학회논문지 IE
• /
• v.45 no.2
• /
• pp.13-19
• /
• 2008

The main advantage of the TLM analysis method is the ease with which even the most complicated transmission line structures. In this paper, using symmetrical condensed node(SCN), the TLM numerical technique has been successfully a lied to microstrip meander line. A detailed technique of the symmetrical condensed node(SCN) may be used to model planar microstrip transmission line is presented. Also, the S-parameters $S_{11}$ and $S_{21}$ of two types of microstrip meander line have been computed. From obtained results, TLM analysis is shown to be an efficient method for modeling complicated structure of planar microstrip transmission line. The TLM results presented here are useful in the design of microwave integrated circuits at higher frequencies region.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.73.1-73.1
• /
• 2010

Using the spectroscopic data secured with the Hamilton Echelle Spectrograph attached to a 3-m telescope at the Lick Observatory, we derived the expansion velocities from various line profiles in the 3600 $\AA$ to 10,000 $\AA$ based on the full width at half maximum and double peak of the high dispersion line profiles. The symmetrical shapes of the permitted line profiles indicate that the permitted line zone is symmetrical e.g., a spherical shell or bipolar + torus structures, which might be evidence of relatively recent ejection from the central star. Most other stronger forbidden lines might be coming from a main shell which appears as a bilateral symmetrical morphology, seen in HST and other ground-based telescopic images. The overall expansion velocities of this main shell structure that are responsible for most lines, seem to show the Hubble type expansion, i.e., accelerating shell. The faster expansion velocities of the permitted OII, NII, NIII and perhaps CII lines that do not suit to the Hubble type expansion, imply the existence of a somewhat smaller inner shell inside the outer main shell. We conclude that the nebular shell consists of a swiftly expanding inner shell and an outer normal shell excited by a central star of about 55,000K. The former compact zone appears to be responsible for the permitted C, N, and O lines while the latter extended shell appears to be responsible for H, He, and forbidden lines. We present some evidence that NGC 6833 be a member of the Galactic halo.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.46-58
• /
• 2016

Architecture and Fashion mutually affects the shape and appearance of the other as an art of space according to the hybrid trends. Therefore, the purpose of this study is to find the correlations between the characteristics of traditional architecture types in Southeast Asia and modern fashion. Firstly, characteristics of the types obtained through the theoretical consideration of Southeast Asian architectural tradition include vertical, symmetrical, geometrical, epeated and continual structure. On the basis of these characteristics analyzed from 2013's S/S to 2015's F/W collection of Alexander McQueen, Gareth Pugh, Victor & Rolf, designers with strong creative and experimental minds who juxtaposed designs of two opposing points as well as hybrids since 2000, the following formativeness exists. First, the vertical structure of high floor is represented as a straight silhouette, a color contrast, vertical cut or wrinkle. Hence, it impresses verticality, rhythm, etc. Second, symmetrical structure of the gable roof is represented as a trapezoidal shape starting from the shoulder line or neck line widened into sleeves, impressing symmetry, dynamism, etc. Third, the geometry of the assembled is represented as vertical and horizontal bands or pattern pieces like puzzle, impressing geometry, three-dimensional, etc. Fourth, repeated structure of the weaving pattern is represented as repetitive patterns of woven fabric or printing techniques. Thus, it impresses repeatability, harmony, etc. And lastly, continuous group structure is represented as a connection of collars or hem-lines, as well as a crossing of fabric that impresses continuity, liquidity, etc.