• 제목/요약/키워드: Symmetric Style

검색결과 20건 처리시간 0.031초

내재해성이 우수한 비닐하우스 부재의 단면형상 및 구조시스템에 관한 연구 (A Study on the Shape of Section in Member and Stress Tolerant Structural System in the Frame of Green Houses)

  • 심종석;한덕전
    • 한국디지털건축인테리어학회논문집
    • /
    • 제12권4호
    • /
    • pp.67-75
    • /
    • 2012
  • The damage of greenhouse has been increasing due to frequent collapse of frame in greenhouse caused by the heavy snow and strong wind. But, greenhouses are constructed by steel tube members of pipe style and pin connection of them, so these greenhouses are very weak. Therefore, this study was carried out to find the type of member section and structural frame system in stress tolerant greenhouses. The modeling types for analysis were designed in accordance with structural frame configuration and member section in greenhouse. These types of models, which are existing type, diagrid type, symmetric and asymmetric section type of frame member in greenhouse were classified. Displacement analysis varying the vertical and horizontal loads for a series of models was carried out. As a result of this paper, it was verified that the structural frame configuration of diagrid type and asymmetric type of member section is better than existing type in the frame of greenhouses against snow loads and wind loads.

Aerodynamic and Flow Characteristics of Tall Buildings with Various Unconventional Configurations

  • Tanaka, Hideyuki;Tamura, Yukio;Ohtake, Kazuo;Nakai, Masayoshi;Kim, Yong Chul;Bandi, Eswara Kumar
    • 국제초고층학회논문집
    • /
    • 제2권3호
    • /
    • pp.213-228
    • /
    • 2013
  • Tall buildings have been traditionally designed to be symmetric rectangular, triangular or circular in plan, in order to avoid excessive seismic-induced torsional vibrations due to eccentricity, especially in seismic-prone regions like Japan. However, recent tall building design has been released from the spell of compulsory symmetric shape design, and free-style design is increasing. This is mainly due to architects' and structural designers' challenging demands for novel and unconventional expressions. Another important aspect is that rather complicated sectional shapes are basically good with regard to aerodynamic properties for crosswind excitations, which are a key issue in tall-building wind-resistant design. A series of wind tunnel experiments and numerical simulation have been carried out to determine aerodynamic forces and wind pressures acting on tall building models with various configurations: corner cut, setbacks, helical and so on. Dynamic wind-induced response analyses of these models have also been conducted. The results of these experiments have led to comprehensive understanding of the aerodynamic characteristics of tall buildings with various configurations.

Anatomic landmark approach to reconstruction of asymmetric midline cleft lip due to Pai syndrome

  • Sobol, Danielle L.;Massenburg, Benjamin B.;Tse, Raymond W.
    • Archives of Plastic Surgery
    • /
    • 제47권5호
    • /
    • pp.483-486
    • /
    • 2020
  • Midline clefts of the upper lip are rare, and it is therefore important that surgeons have access to a methodical approach for when these presentations are encountered. We adapted principles of the anatomic subunit approximation for unilateral cleft lip, to the repair of midline clefts. The overt use of anatomic landmarks to define the repair results in a design that inherently adjusts to varying degrees of clefts and can accommodate asymmetries. The "measure twice, cut once" style is an advantage to new surgeons and to surgeons who seldom encounter this presentation. We describe the details of surgical repair in the context of a patient with Pai syndrome and associated nasal hamartomas that resulted in nasolabial asymmetry. This is the first report of surgical outcome following treatment of Pai syndrome and includes early and 5-year follow-up. The system of repair that we describe is applicable to both symmetric and asymmetric midline clefts.

과학 영재들의 학습양식에 따른 소집단 구성이 언어적 상호작용에 미치는 영향 탐색 (Exploring the Effects of Grouping by Learning Style of Gifted-Student in Science on the Verbal Interaction)

  • 이은경;윤지현;강성주
    • 대한화학회지
    • /
    • 제58권4호
    • /
    • pp.406-417
    • /
    • 2014
  • 최근 소통과 협업을 통해 문제를 탐구할 수 있는 인재 양성에 대한 요구가 증가함에 따라 과학 영재교육에서 소집단 활동에 대한 중요성이 강조되고 있다. 따라서 이 연구에서는 효과적인 소집단 구성 방안을 모색하기 위하여, 과학 영재들의 학습양식에 따른 언어적 상호작용의 특징을 분석하고, 학습양식에 기반한 소집단 구성이 소집단 활동의 상호작용에 어떠한 영향을 미치는지를 조사하였다. 이를 위하여 경쟁형, 협동형, 의존형 학습양식과 협동형, 협동형, 의존형 학습양식을 지닌 6명의 과학 고등학교 학생들을 각각 소집단 1과 소집단 2로 구성하였다. 연구 결과, 소집단 1의 경우 상호작용의 질적 수준이 낮은 비대칭적 형태의 상호작용이 나타난 반면, 소집단 2에서는 상호작용의 질적 수준이 높은 대칭적 형태의 상호작용이 나타났다. 즉, 소집단 1보다 소집단 2에서 심층적 상호작용의 빈도가 높았고, 학생들이 소집단 활동에 동등하게 참여하는 모습을 나타냈다. 이와 같은 결과는 학생들의 학습양식을 고려한 소집단 구성 방법이 소집단 활동의 참여 여부나 상호작용의 질적 수준 등에 중요한 영향을 미칠 수 있음을 의미한다. 이에 대한 교육적 함의를 논의하였다.

Superconductive Multi-pole Hairpin type Filter과 Delay Time 설계 및 실험 (Modeling and Simulation of the Delay Time in Superconductive Multi-pole Hairpin type Filter)

  • 양재라;정구락;강준희
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.135-137
    • /
    • 2002
  • In the favor of adjusting microwave signal, Hairpin type Filter, which delay microwave signal enough to several nanosecond, is a key component. One of the main advantage in using Hairpin type Filter is a conveniency for equipping with Delay Module, and because of having a wide bandwidth, Hairpin type Filter can be designed to satisfy the most applications. In this work, we attempted to estimate the delay time in a superconductive hairpin type filter A software to synthesize even and odd order equiripple hairpin type filter has been developed. This software arbitrarily locate its transfer zeros making symmetric of asymmetric amplitude response and equalizing group delay. Borland C++ compiler has been used. The program was designed to run under MS-DOS, Window 98, Window 2000. The program optimizes the position of the transfer function zeros in order to fulfill the group delay specification masks. We designed and fabricated a hairpin type HTS 2-pole microstrip bandpass filter to operate at 5.8Ghz. The fabrication method was pulsed laser deposition and YBCO films were deposited on sapphire substrates with a Ce$O_{2}$ thin layer as a buffer layer. We also developed a new style hairpin type filter by using interdigitide inner-pole. Compared to the same size regular hairpin type filters, our filters had a lower center frequency.

  • PDF

여러 가지 들기 작업에서의 인체심리학적 · 생리학적 연구 (Psychophysical and Physiological Study on Various Lifting Tasks)

  • 윤훈용
    • 대한인간공학회지
    • /
    • 제25권2호
    • /
    • pp.11-22
    • /
    • 2006
  • The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.

부채널 분석에 안전한 밸런스 인코딩 기법에 관한 연구 (Study for Balanced Encoding Method against Side Channel Analysis)

  • 윤진영;김한빛;김희석;홍석희
    • 정보보호학회논문지
    • /
    • 제26권6호
    • /
    • pp.1443-1454
    • /
    • 2016
  • 하드웨어 기반의 Dual-rail Logic 스타일을 소프트웨어로 구현한 밸런스 인코딩 기법은 추가적인 저장 공간이 필요 없는 효과적인 부채널 분석 대응방법이다. 밸런스 인코딩 기법을 이용하여 암호 알고리즘을 구현하면 암호 알고리즘이 연산되는 동안 입력 값에 상관없이 비밀 정보를 포함하고 있는 중간 값은 항상 일정한 해밍 웨이트 및 해밍 디스턴스를 유지하게 되어 부채널 분석을 어렵게 만드는 효과가 있다. 그러나 기존 연구에서는 밸런스 인코딩 기법을 적용한 Constant XOR 연산만 제안되어 있어 PRINCE와 같이 XOR 연산만으로 구성이 가능한 암호 알고리즘에만 적용이 가능하다는 제한사항이 있다. 따라서 본 논문에서는 ARX 구조 기반의 다양한 대칭키 암호 알고리즘에도 적용이 가능하고, 효율적인 메모리 관리를 위해 Look-up table을 사용하지 않는 새로운 Constant AND, Constant Shift 연산 알고리즘을 최초로 제안하였으며, 상호 정보량 분석을 통해 안전성을 확인하였다.

근대기 대구지역 벽돌조 강당 건물의 건축특성과 파사드 구성에 관한 연구 - 남산초등학교 강당을 중심으로 - (A Study on the Architectural Characteristics and Facade Construction of the Brick Masonry Auditorium in Daegu During the Modern Age - Focused on the Auditorium of Namsan Primary School -)

  • 윤재웅
    • 건축역사연구
    • /
    • 제19권6호
    • /
    • pp.121-135
    • /
    • 2010
  • This study was to analyze the architectural characteristics and facade construction of brick masonry auditorium through the Auditorium of Namsan Primary School in 1936. The results of this study were described separately as follows. 1. The auditorium is located away from the school buildings, and its plane is a chamber of rectangle type with an entrance installed on each of the four sides. 2. The external appearance is Renaissance eclectic style, laid red bricks on the lower wall of the window and having a mansard roof. The front and the rear are symmetric with respect to the projected wall at the center. 3. As to the structure of the building, a concrete lower wall was built on the concrete continuous footing, and the brick wall was constructed on the lower wall. The roof is queen post roof truss, and the wall girders were installed on the brick wall. 4. The auditorium has had a number of repairing and maintenance works, which changed the roof and windows outside and the floor, walls, ceiling, etc. inside. 5. The decorative elements of external appearance include lower wall, brick wall, entrances, windows, roof, and dormer windows. The brick wall gives verticality and solidity to the surface of the wall, and the lower wall and wall girders are connected like a cornice of the wall. The surface of the mansard roof and dormer windows express a stable vertically oriented shape.

A Study on the Characteristics of Knitwear Fashion Design: With a focus on Missoni, Sonia Rykiel, Azzedine Alaia

  • Chun, Hei Jung;Park, Jae Min
    • International Journal of Costume and Fashion
    • /
    • 제13권1호
    • /
    • pp.23-34
    • /
    • 2013
  • The purpose of this study is to better understand the development and characteristics of knitwear fashion design by examining the transformation process of the modern knits. The subjects of the study are Missoni, Sonia Rykiel, and Azzedine Alaia, designers who are world-renowned knit designers, and the expressive techniques in their designs will be evaluated. The study also intends to analyze the aesthetic value of each designer's style through their product's silhouette, colors, and knitting techniques. On the basis of the analysis, we hope to research the factors in the designing process that will allow knits, which were made for practical purposes, to be valued as a luxury fashion item, and with the results, show the potential for knits in expanding its domain in fashion to become a more luxurious, creative fashion item. The characteristic comparison of the designers is as follows: First, in the case of colors, Missoni shows its distinct identity through a balance of splashy colors as well as nature-inspired color composition and balance. And, only with color use, is also able to express perspective, form composition, and rhythm. Sonia Rykiel designs are composed of black backgrounds with strong primary colors that are contrasted with one-point or stripes to express a light, urban image. Alaia emphasizes femininity by the use of black and white colors, which show modernity, in combination with neutral skin-toned colors, such as beige and gray. So, in other words, Missoni and Sonia Rykiel mixed colors for visual interconnectivity, while Alaia expressed femininity through the use of an achromatic color. Second, in the case of knitting techniques, Missoni uses the jacquard technique to make complex patterns that show balance of colors and patterns such as zigzag, stripe, geometries, and titan check, which are geometric, abstract, and symmetric. Sonia Rykiel who uses stripes as her trademark, most often utilizes the intarsia technique, which is expressed through one-point. Alaia combines diverse techniques, such as the Skashi weaving, by using computerized knitting. Third, as for silhouettes, Missoni eliminated exaggerated details in order to emphasize the flashy colors and delicate patterns and weavings of its designs, and this resulted in simplistic and relaxed silhouettes. Sonia Rykiel took advantage of the elasticity that the knit offers to get a tight silhouette, and in turn, emphasized the female sensuality. Alaia used curvilinear cuts that emphasized the womanly curves and gained an image considered soft and feminine.

과점산업(寡占産業)에서의 진입제한가격(進入制限價格) (Limit Pricing by Noncooperative Oligopolists)

  • 남일총
    • KDI Journal of Economic Policy
    • /
    • 제12권1호
    • /
    • pp.127-148
    • /
    • 1990
  • 이 논문의 기본목표는 Bain 이래 논란의 대상이 되어 온 기존기업들에 의한 진입제한가격(進入制限價格)의 형성이 일반적으로 가능한가, 가능하다면 어떠한 메커니즘을 통해 형성되는 가를 밝히고, 진입제한가격이론(進入制限價格理論)이 한국경제에 갖는 의의를 찾아보는데 있다, 이 논문에서 밝혀질 주요결과는 다음과 같다. 첫째, 다수의 기존기업(旣存企業)이 각자의 이윤극대화(利潤極大化)를 추구하며 카르텔을 형성하지 않는 때에도 기존기업(旣存企業)과 잠재적(潛在的) 신규기업간(新規企業間)에 정보의 불균형이 존재하는 경우 진입제한가격(進入制限價格)이 채택될 가능성이 있다. 둘째, 이러한 과점기업(寡占企業)들에 의한 진입제한가격형성(進入制限價格形成)은 암묵적 담합의 새로운 형태로 해석할 수 있다. 셋째, 진입제한가격형성(進入制限價格形成)은 각종 회계자료(會計資料)가 공표되지 않을 경우에 가능하다. 넷째, 기존기업(旣存企業)의 수(數)가 증가하여 산업(産業)이 완전경쟁산업(完全競爭産業)에 접근해 감에 따라 진입제한가격(進入制限價格)이 형성될 가능성은 사라지게 된다.

  • PDF