• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.791-798
• /
• 2015

It has been grown interests of the convergence technologies about communication systems and vehicular industry. Vehicular communications enable a number of infotainment applications to serve cars under high mobility environments. To achieve this goal, a robust and accurate channel estimation scheme is of great importance. This paper proposes an enhanced Decision-Directed channel estimation scheme called PTAU(Pilot Tone Aided Update) for IEEE 802.11p in vehicular communication environment. Existing approaches which use subsequent data symbols to estimate channel response in time domain will lead to the error propagation. In this paper, we use the pilot subcarriers to get initial channel response, then utilize the correlation characteristics to update channel response in frequency domain. Finally, Analysis and simulation results reveal that the proposed scheme outperforms in bit error rate(BER), significantly improve the performance of the estimation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.105-111
• /
• 2011

In this paper, we propose a novel Alamouti space-time transmission scheme for orthogonal frequency division multiplexing (OFDM) based asynchronous cooperative communication systems with low relay complexity. The conventional scheme requires an additional operation likes time-reversal at the relay nodes besides the simple multiplications at the relay nodes, which result in increasing the complexity of relay nodes. Unlike the conventional scheme, exploiting the simple combination of the symbols at the source node and the simple multiplications at the relay nodes, the proposed scheme achieves the second order diversity gain by obtaining the Alamouti code structure at the destination node. Simulation results show that the proposed scheme achieves the second order diversity gain and has the same bit error rate performance as the conventional scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.295-301
• /
• 2011

In [1], it has been shown that the energy spreading transform (EST) based iterative equalizer (IE) could enhance its performance by improving the reliability of the decision feedback symbols without the help of the complicated channel decoder. In the matched filter (MF) based IE proposed in [1], however, its feedforward filter (FFF) has been designed in the frequency domain while its feedback filter (FBF) in the time domain. So its complexity increases proportional to the channel memory length. To solve this problem, in this paper, both FFF and FBF are designed in the frequency domain. This enables the proposed frequency domain IE (FD-IE) to achieve the lower complexity over the conventional method in the highly dispersive channel. In addition, simulation results demonstrate that the BER performance of the proposed method is the same as the conventional.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.723-729
• /
• 2011

In this paper, we simulate and evaluate the performance of MIMO systems adopting MMSE-OSUC receiver algorithm under Rayleigh fading channel environment. In the simulation, BPSK, QPSK, 16QAM, and 64QAM modulation is used with frame length of 100 symbols. First, the concept of MIMO is introduced by the analytical basis of the channel capacity of MIMO system. From the performance analysis results, the channel capacity is identified by the function of channel and it is affected by the channel characteristic. Next, based on this approach, the algorithm for performance evaluation over MIMO channel was analyzed. From the performance analysis results, it is found that MMSE-OSUC receiver algorithm generally outperform conventional ZF-OUSC receiver algorithm in performance but the performance difference between the two algorithms is reduced as modulation scheme with larger constellation point is used.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.323-330
• /
• 2009

This paper proposes a methodology for automatic hierarchy classification of subtitles in a engineering document by the a fact that heading symbols of subtitles represent a hierarchical structure of the document. The proposed methodology is composed of two methods: extracting subtitles from plan text document and determining hierarchical structure of the subtitles. The subtitles in a document is extracted by comparing heading symbol patterns with predefined heading symbol groups, and the depth levels of the subtitles are determined by analyzing relative location of subtitles according to change of the heading symbol patterns. A prototype module, which can transform a plain text document into a structured XML document in accordance with a hierarchical structure of subtitles, is developed based on the proposed methodology, and the performance of the module is analyzed with 20 engineering documents.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.275-285
• /
• 2006

With these excavated clothes discussed above, the clothing style before and after the Chosun-Japan War from 1592 to 1597 can be summarized as follows. 1) Shroud was a clothes newly made for funeral or usually worn by the deceased. Shroud was mostly a unlined clothes whose adjustment was made in such way its left part was on top of its right one. Yeomeui, a clothes used to wrap up the body of the deceased or fill between the body and the coffin, was usually lined or quilted. Suryeeui was a suit sent by close relatives of the deceased or granted by the court. Mostly padded with cotton or quilted, suryeeui was used only for yeomeui. 2) The term of ching was used to count units of po and suits of trousers and jeogori during dressing the deceased for burial. If trousers and jeogori were not joined into a suit, they were not counted as ching. 3) Aekjueumpo, bangryeongsangeui, three-forked trousers and haengjeon for women were all clothes worn around the war. All these clothes were not worn after the war. 4) Several types of po which were discovered in Daejeon included danryeong, simeui, nansam, jikryeong, cheolik, aekjuempo, changeui and jungchimak for men and jangeui for women. Often, jikryeong, cheolrik, aekjueumpo and bangryeongsangeui were used before the war and changeui and jungchimak since then. 5) The git of jeogori had the style of mokpan git before the war, which was changed into that of dangko git through making the rectangular ege of mokpan git rounded in the 17th century. And jeogori became entirely small sized and the baerae line of sleeve became oblique. 6) In funeral rites of Daejon, simeui and nansam both of which were symbols of Confucian scholars, instead of official uniforms, were used as funeral garments. This suggests that funeral rites of Daejeon considerably reflected academic traditions of the Giho school meaning groups of scholars representing the region.

• Spatial Information Research
• /
• v.15 no.3
• /
• pp.335-346
• /
• 2007

Road sign is one of the road attached facilities to provide conveniences to motor drivers. The setup of location information according to the related regulation and the inclusion of various attributes such as place names, route numbers, symbols, bearings, distances to the place of interest distinguish the road sign from other facilities. These features give advantages to the informationization of road sign. Presently there established about 130,000 road signs on each class of roads, and about 280 road management offices have controlled these road signs independently, but there are plethora of ineffectiveness such as the lack of consistency, recognition, connectivity, and location suitability etc. These are the major factor of confusions rather than providing conveniences, and arisen a lot of public grievances. Accordingly, in this research the road signs throughout the nation were databased and the web-GIS based road sign management system was established to ameliorate the problems reveled. Since the road sign management system we developed reflected the demands of the persons in charge and users, the management effectiveness might be enhanced and the public inconveniences will be reduced.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.3
• /
• pp.16-33
• /
• 1993

New decoding algorithm of double-error-correction Reed-Solmon codes over GF(2$^{8}$) for optical compact disks is proposed and decoding algorithm of RS codes with triple-error-correcting capability is presented in this paper. First of all. efficient algorithms for estimating the number of errors in the received code words are presented. The most complex circuits in the RS decoder are parts for soving the error-location numbers from error-location polynomial, so the complexity of those circuits has a great influence on overall decoder complexity. One of the most known algorithm for searching the error-location number is Chien's method, in which all the elements of GF(2$^{m}$) are substituted into the error-location polynomial and the error-location number can be found as the elements satisfying the error-location polynomial. But Chien's scheme needs another 1 frame delay in the decoder, which reduces decoding speed as well as require more stroage circuits for the received ocode symbols. The ther is Polkinghorn method, in which the roots can be resolved directly by solving the error-location polynomial. Bur this method needs additional ROM (readonly memory) for storing tthe roots of the all possible coefficients of error-location polynomial or much more complex cicuit. Simple, efficient, and high speed method for solving the error-location number and decoding algorithm of double-error correction RS codes which reudce considerably the complexity of decoder are proposed by using Hilbert theorems in this paper. And the performance of the proposed decoding algorithm is compared with that of conventional decoding algorithms. As a result of comparison, the proposed decoding algorithm is superior to the conventional decoding algorithm with respect to decoding delay and decoder complexity. And decoding algorithm of RS codes with triple-error-correcting capability is presented, which is suitable for error-correction in digital audio tape, also.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.69-78
• /
• 2001

This paper presents the design and FPGA implementation of a FLEX PSP(Protocol Signal Processor) for the portable high speed paging system. In this approach, two algorithms are newly proposed for implementing the PSP which provides capabilities of the maximum 6,400bps at speed, high-channel throughput, real time error correction and an effective frame search function. One is an accurate symbol synchronization algorithm which is applied for synchronizing the interleaved 4-level bit symbols which are received at input stage of A/D converter, and the other is a modified fast decoding algorithm which is provided for realizing double error correction of (31,21)BCH signal. The PSP is composed of six functional modules, and each module is modelled in VHDL(VHSIC Hardware Description Language). Both functional simulation and logic synthesis have performed for the proposed PSP through the use of Synopsys$^{TM}$ tools on a Axil-320 Workstation, and where Altera 10K libraries are used for logic synthesis. From logic synthesis, we can see that the number of gates is about 2,631. For FPGA implementation, timing simulation is performed by using Altera MAX+ PLUS II, and its results will be also given. The PSP which is implemented in 6 FPGA devices on a PCB has been verified by means of Logic Analyzer.r.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.425-430
• /
• 2016

This study is to improve the design of bus transfer information that can be substantially used. This study has been processed using the following steps. First, I tried to define the information design and way-finding information design. Secondly, I have researched several case studies, and considered solutions. Finally, I evaluated way-finding maps through pair-wise comparisons, and drew needs through an interview. As the result of this research, there were some problems in font size, improper space between letters and non-consistent information. To solve these problems, the information has to be clear using easy symbols to be well-recognized by citizens. Also, the font size needs to be decided by a calculation of minimum legible size of letters. Lastly, a value contrast between a background color and a letter color needs to be applied more than 70 percent for better visibility. The study is expected to be used as a reference which helps informational design to be developed.