• Korean Architects
• /
• s.506
• /
• pp.65-69
• /
• 2011

• Journal of Daesoon Thought and the Religions of East Asia
• /
• v.3 no.1
• /
• pp.155-157
• /
• 2023

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.3-38
• /
• 2000

Slope draperies in soil and rock are a well known method to avoid rockfalls into the roads or onto housings. Common wire mesh or a combination of wire mesh and wire rope nets are pinned to the slope by the means of fully grouted nails or anchors. Most of these installations have not been designed to stabilize the slope, but simply avoid the rocks from bouncing. The combination of soil- or rocknailing with a designable flexible facing system offers the advantage of a longterm stabilization of slopes and can replace other standard methods for slope stabilization. The capability to transfer axial and shear loads from the flexible facing system to the anchor points is most decisive for the design of the stabilization system. But the transfer of forces by mesh as pure surface protection devices is limited on account of their tensile strength and above all also by the possible force transmission to the anchoring points. Strong wire rope nets increase the performance for slope stabilizations with greater distances between nails and anchors and are widely used in Europe. However, they are comparatively expensive in relation to the protected surface. Today, special processes enable the production of diagonally structured mesh from high-tensile steel wire. These mesh provide tensile strengths comparable to wire rope nets. The interaction of mesh and fastening to nail / anchor has been investigated in comprehensive laboratory tests. This also in an effort to find a suitable fastening plates which allows an optimal utilization of the strength of the mesh in tangential (slope-parallel) as well as in vertical direction (perpendicular to the slope). The trials also confirmed that these new mesh, in combination with suitable plates, enable substantial pretensioning of the system. Such pretensioning increases the efficiency of the protection system. This restricts deformations in the surface section of critical slopes which might otherwise cause slides and movements as a result of dilatation. Suitable dimensioning models permit to correctly dimension such systems. The new mesh with the adapted fastening elements have already been installed in first pilot projects in Switzerland and Germany and provide useful information on handling and effects.

• The Journal of the Korean dental association
• /
• v.52 no.12
• /
• pp.734-743
• /
• 2014

Objectives: By introduced reciprocation motion file in dentistry, dentists benefit simple canal shaping procedure and time-saving. But, reciprocation motion generates uncomfortable vibration to doctors and patients. Because there was no study about this consideration, this study compared vibration pattern and power generated from reciprocation motion motor and conventional rotary motor. Materials & Methods: One conventional rotary motor; X-Smart (Dentsply Maillefer, Ballaigues, Switzerland); and two reciprocating motors; WaveOne Motor (Dentsply Maillefer, Ballaigues, Switzerland) and X-SMART PLUS (Dentsply Maillefer, Ballaigues, Switzerland); were used in this study. Triaxial $ICP^{(R)}$ Accelerometer (Model 356A12, PCB piezotronics, New York, USA) was attached on motor's handpiece head, and was measured tri-axial vibratory acceleration with NI Sound and Vibration Assistant 2009 software (National Instruments, Texas, USA). Mean vibratory acceleration and maximum vibratory acceleration was measured on fixed position and handed position. The results of vibratory acceleration were statistically analyzed using ANOVA and multiple comparisons are made using Turkey's test at p<0.05 level. Results: Reciprocating motors showed higher mean vibratory acceleration and maximum vibratory acceleration than conventional rotary motor (p<0.05). Between reciprocating motors, X-SMART PLUS had lower mean vibratory acceleration and maximum vibratory acceleration than WaveOne Motor (p<0.05). Conclusion: Reciprocating motors generate more vibration than conventional rotary motor. Further study about effect of vibration to dentist and patient is needed. And it seems to be necessary to make a standard about vibration level in endodontic motors.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.73-84
• /
• 2015

Comparison of the standard and instruction for grade and quality of landscape plants between Korea and foreign countries indicates that the individual country characteristically develops and uses their own standards for landscape plants. Ultimate aim of these regulations is to develop the standard of landscape plants classified by kinds, types and purposes to improve the quality of landscape plants. This study analyzed the differences of standards and instructions for landscape plants between Korea and other countries such as Germany, Switzerland, America, Canada and Japan. Our results indicated that Korea and Japan used the diameter at 1.2m above from ground surface for the diameter at breast height(DBH) whereas Germany and Switzerland at 1.0m above from ground surface. In case of America and Canada, the standard of landscape plants included crown width, height and DBH of plants. In Germany, the standard for creeping plants and herbaceous flowers was determined by the type and the root size of plants with the standard of containers(seven to eleven types). This research would be helpful for developing the practical and environmentally suitable guideline for the grade and quality of landscape plants and also for developing the standardized distribution structures and cultivation techniques for landscape plants in Korea.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.169-187
• /
• 2020

In Korea, Switzerland has been known as a country that integrates the Cadastral System (hereafter as CS.) and the registration system(hereafter as RS.) according to a research report by the Ministry of Home Affairs since 1975. However, I found that Switzerland's CS. and RS. were separately managed by the Dept. of Defense, Civil Protection & Sports(hereafter as DDPS.) and the Dept. of Justice & Police(hereafter as DJP.). Therefore, I have a question about where is the institution in charge of the CS. and RS. in Switzerland, what are the relevant laws and regulations, and what are the related public records, and the background and purpose of this study is to resolve this. Research Results First, cadastral affairs are handled by the Cadastral Surveying Division at the Federal Office for Topography (Swisstopo) under the DDPS, and the registered affairs are handled by the Private Law Division at the Federal Office for Justice under the DJP. Second, Cadastral-related laws include 'VAV' and 'TVAV' newly enacted in 1993, and Registration-related laws include 'Civil Act(ZGB)' and 'Order on Land Registration(GbVO)' etc. which have been in effect since 1912. Third, the cadastral record includes the Cadastral Books, Cadastral Maps & Numerical Cadastral Books etc, and the register includes the Hauptbuch, Tagebuch, Pläne, Liegenschaftsbeschreibung etc. It is hoped that the results of this study will provide an accurate understanding of the fact that Switzerland's CS. is managed separately by the DDPS, and the RS. is managed by the DJP.

• Journal of the Korean Mathematical Society
• /
• v.41 no.4
• /
• pp.755-772
• /
• 2004

We show that the Fourier-Laplace series of a distribution on the sphere is uniformly Cesaro-summable to zero on a neighborhood of a point if and only if this point does not belong to the support of the distribution. Similar results on the ball and on the real projective space are also proved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.367-368
• /
• 2010

• Journal of Practical Agriculture & Fisheries Research
• /
• v.14 no.1
• /
• pp.139-160
• /
• 2012

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.3
• /
• pp.335-345
• /
• 2012

This study provides product survey data for the development of medical compression stockings. An investigation analyzed imported medical compression stockings of 40 brands from 6 countries sold in the Korean market, such as Jobst$^{(R)}$, Therafirm$^{(R)}$, Rxtar$^{(R)}$, Varicoin$^{(R)}$, and Sheer&Soft (USA), Sigvaris Venosan$^{(R)}$ 4000 (Switzerland), Best$^{(R)}$ and Segreta$^{(R)}$ (Italy), Venex$^{(R)}$, Star cotton, Doktus$^{(R)}$, Maxis$^{(R)}$, Maxis$^{(R)}$ Cotton, Lastofa$^{(R)}$, and Memory Aloe Vera (Germany), and Gunze (Japan), Venos and Yolanda (Taiwan). The main fibers of compression stockings were nylon and spandex; in addition, the fiber content was different by country and brand. The number of compression classes of imported products was USA (5), Italy (5), Germany (4), Switzerland (3), Japan (3), and Taiwan (3). For basic body measurements, USA and Swiss brands used ankle circumference, calf circumference, thigh circumference, calf length, and thigh length. Italian brands used height and weight, and Japanese brands used height and hip circumference. German brands used subdivided circumferences such as ankle circumference, calf circumference, knee circumference, middle thigh circumference, and thigh circumference.