• Title/Summary/Keyword: Switching Time

Search Result 1,898, Processing Time 0.022 seconds

Automatic setting of delay time of an occupancy sensor using an adder circuit (인체감지 센서의 시간지연 설정)

  • 정영훈;송상빈;여인선
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 1998.11a
    • /
    • pp.162-165
    • /
    • 1998
  • A certain degree of energy saving can be possible by controlling the delay time of occupancy sensor. In this paper a control circuit is designed for automatic control of delay time setting appropriate to different situations using a digital counter, two latches and an adder. The delay time is controlled by adjusting the time constant of RC circuit through on-off control of switching devices according to adder output, which determines the base current level of switching devices. And from PSpice simulation it is verified to function properly.

  • PDF

Wideband Capon Beamforming for a Planar Phased Radar Array with Antenna Switching

  • Lee, Moon-Sik
    • ETRI Journal
    • /
    • v.31 no.3
    • /
    • pp.321-323
    • /
    • 2009
  • A wideband beamforming algorithm for estimating the azimuth angle, elevation angle, velocity, and range using a planar phased radar array with antenna switching is proposed. It uses the time-variant steering vector model. Simulation results illustrating the performance of the proposed beamformer are presented.

  • PDF

Failure analysis of the T-S-T switch network

  • Lee, Kang-Won
    • Korean Management Science Review
    • /
    • v.11 no.1
    • /
    • pp.187-196
    • /
    • 1994
  • Time-Space-Time(T-S-T) switching network is modeled as a graceful degrading system. Call blocking probability is defined as a measure of performance. Several performance related measures are suggested under the presence of failure. An optimization model is proposed, which determines optimal values of system parameters of the switching network.

  • PDF

A Study on the Design and Validation of Switching Control Law (전환제어법칙 설계 및 검증에 관한 연구)

  • Kim, Chong-Sup
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.17 no.1
    • /
    • pp.54-60
    • /
    • 2011
  • The flight control law designed for prototype aircraft often leads to degraded stability and performance, although developed control law verify by non-real time simulation and pilot based evaluations. Therefore, the proper evaluation methods should be applied such that flight control law designed can be verified in real flight environment. The one proposed in this paper is IFS (In-Flight Simulator). Currently, this system has been implemented into the F-18 HARV (High Angle of Attack Research Vehicle), SU-27 and F-16 VISTA (Variable stability In flight Simulation Test Aircraft) programs. The IFS necessary switching control law such as fader logic and integrator stand-by mode to reduce abrupt transient and minimize the integrator effect for each flight control laws switching. This paper addresses the concept of switching mechanism with fader logic of "TFS (Transient Free Switch)" and stand-by mode of "feedback type" based on SSWM (Software Switching Mechanism). And the result of real-time pilot evaluation reveals that the aircraft is stable for inter-conversion of flight control laws and transient response is minimized.

Reliability Analysis of the 2-Dimensional Ring-Banyan Network (2차원 링-밴얀 망의 신뢰성 분석)

  • Park, Jae-Hyun
    • Journal of KIISE:Information Networking
    • /
    • v.34 no.4
    • /
    • pp.256-261
    • /
    • 2007
  • 2-Dimensional Ring-banyan network is a high-performance fault-tolerant switching network using a deflection self-routing. The throughput of the switching network is better than that of Cyclic Banyan network under non-uniform traffic. In this paper, we present an analytic reliability analysis of the fault-tolerant switching network. We present the Mean-Time-to-Failure that is calculated by using probabilistic model. This model also takes into account a hardware complexity. In case of $16\;{\times}\;16$ size, the presented switching network is 1.275 times more reliable than Hui's switching network. And it is 1.510 times more reliable than Hui's network in case of $64\;{\times}\;64$ size.

Factors Affecting Subscribers' Switching between Providers within Mobile Number Portability System (이동전화 이용자의 번호이동에 영향을 미치는 요인에 대한 실증분석)

  • Kim, Ho;Park, Yoon-Seo;Jun, Duk-Bin;Yang, Liu
    • Korean Management Science Review
    • /
    • v.25 no.2
    • /
    • pp.57-71
    • /
    • 2008
  • We study factors that affect consumers' switching behaviors among service providers in Korean mobile telecommunications service market. For empirical analysis, quarterly time series data from the first quarter of 2004 through the second quarter of 2007 were used. We chose the number of switchers to each mobile service provider in each quarter as dependent variables. Independent variables include acquisition costs per subscriber, which play the role of subsidy to mobile handset, switching costs, time trend, structural change effect, and waiting demand effects. Through the empirical analysis, we found that each provider's churn-in customers are affected by different factors. Specifically, the number of churn-in customers into SK Telecom is explained mainly by SK Telecom's customer acquisition costs and waiting demand from KTF, while the number of customers switching into KTF is better explained by switching costs from the previous service provider and waiting demand from SK Telecom. Those who chose LG Telecom as their new provider, on the other hand, were mainly attracted by LG Telecom's high subscriber acquisition cost.

A Study on the Design of Hardware Switching Mechanism using TCP/IP Communication (TCP/IP를 이용한 하드웨어 전환장치 설계에 관한 연구)

  • Kim, Chong-Sup;Cho, In-Je;Lim, Sang-Soo;Ahn, Jong-Min;Kang, Im-Ju
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.13 no.7
    • /
    • pp.694-702
    • /
    • 2007
  • The SSWM(Software Switching Mechanism) of I-processor concept using non-real time in-house software simulation program is an effective method in order to develop the flight control law in desktop or HQS environment. And, this system has some advantages compare to HSWM(Hardware Switching Mechanism) such as remove the time delay effectiveness and reduce the costs of development. But, if this system loading to the OFP(Operational Flight Program), the OFP guarantee the enough throughput in order to calculate the two control law at once. Therefore, the HSWM(Hardware Switching Mechanism) of 2-processor concept is necessary. This paper addresses the concept of HSWM of the HQS-PC interface using TCP/IP(Transmission Control Protocol/Internet Protocol) communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed in order to reduce the abrupt transient response and minimize the integrator effect in pitch axis. The result of the analysis based on HQS pilot simulation using HSWM reveals that the flight control systems are switching between two computers without any problem.

Switching performances of multivarite VSI chart for simultaneous monitoring correlation coefficients of related quality variables

  • Chang, Duk-Joon
    • Journal of the Korean Data and Information Science Society
    • /
    • v.28 no.2
    • /
    • pp.451-459
    • /
    • 2017
  • There are many researches showing that when a process change has occurred, variable sampling intervals (VSI) control chart is better than the fixed sampling interval (FSI) control chart in terms of reducing the required time to signal. When the process engineers use VSI control procedure, frequent switching between different sampling intervals can be a complicating factor. However, average number of samples to signal (ANSS), which is the amount of required samples to signal, and average time to signal (ATS) do not provide any control statistics about switching performances of VSI charts. In this study, we evaluate numerical switching performances of multivariate VSI EWMA chart including average number of switches to signal (ANSW) and average switching rate (ASWR). In addition, numerical study has been carried out to examine how to improve the performance of considered chart with accumulate-combine approach under several different smoothing constant and sample size. In conclusion, process engineers, who want to manage the correlation coefficients of related quality variables, are recommended to make sample size as large and smoothing constant as small as possible under permission of process conditions.

Time Switching for Wireless Communications with Full-Duplex Relaying in Imperfect CSI Condition

  • Nguyen, Tan N.;Do, Dinh-Thuan;Tran, Phuong T.;Voznak, Miroslav
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.10 no.9
    • /
    • pp.4223-4239
    • /
    • 2016
  • In this paper, we consider an amplify-and-forward (AF) full-duplex relay network (FDRN) using simultaneous wireless information and power transfer, where a battery-free relay node harvests energy from the received radio frequency (RF) signals from a source node and uses the harvested energy to forward the source information to destination node. The time-switching relaying (TSR) protocol is studied, with the assumption that the channel state information (CSI) at the relay node is imperfect. We deliver a rigorous analysis of the outage probability of the proposed system. Based on the outage probability expressions, the optimal time switching factor are obtained via the numerical search method. The simulation and numerical results provide practical insights into the effect of various system parameters, such as the time switching factor, the noise power, the energy harvesting efficiency, and the channel estimation error on the performance of this network. It is also observed that for the imperfect CSI case, the proposed scheme still can provide acceptable outage performance given that the channel estimation error is bounded in a permissible interval.

Switching and first-passage-time distributions in a two-mode ring dye laser (2모드 색소레이저 출력의 switching과 First-Passage-Time(FPT) 분포)

  • 박구동;신종태;김태수
    • Korean Journal of Optics and Photonics
    • /
    • v.5 no.2
    • /
    • pp.245-251
    • /
    • 1994
  • The charateristics of switching between two modes in a ring dye laser has been analyzed by the Monte-Carlo computer simulation. The effect of including pump fluctuations in the first-passage-time (FPT) distributions was compared with the distribution with the quantum fluctuation. The results show the same tendency in both cases, such as steep increases from 0 to peak an exponential decrease in long time range. However the introduction of pumping fluctuation is turned out to shorten the mean FPT. The variation of the mean FPT is examined for the various fluctuationrelated parameters. The mean FPT is lengthened when pump parameter a is increased while it is shorted when Q. $\GAMMA$ are decreased. eased.

  • PDF