• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.100-106
• /
• 2021

Typical implants are not specified the screw structure and the surface process according to the bone quality of the human body. The purpose of this study is to complement the shortcomings of the existing implant surface processing method. It is to propose a surface processing method that increases the adhesion between the implant and bone tissue by increasing the surface area per unit area of the implant. It is very important to establish precise and systematic process parameters when surface treatment of implants using lasers. Therefore, we intend to develop a process so that the implant can be a biocompatible structure using a Q-switching Nd:YAG laser with a wavelength of 1.06um. Implant surface treatment technology through this study will be used in the industry.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.72-78
• /
• 1999

The frequency characteristics of surface corona discharge from the electrodes on the ceramic substrate ozonator were investigated. The frequency characteristics of dark current were compared with that of corona discharge. Switching frequency which was the fraction of resonant frequency was found to be effective for corona discharge. This is regarded to distort the electric field distribution on the discharge plate which is essential for corona discharge. The measurement showed the efficiency of 28mg/W ozone generation when the switching frequency was 1/5 of the resonant frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.689-696
• /
• 2000

In this paper, an improved method is proposed to eliminate the chattering for Sliding Mode Controller. The differential-calculus of a switching function is converged to a particular constant or the proportional term so that the chattering in transient state is eliminated in the conventional method. However, by using the improved method, it is converged to its proportional-integral term so that the chattering is eliminated in transient state and steady state both. The computer simulation for brushless DC motor speed controller is used to compare the improved method with the conventional method and to verify the useful effect of the method in this paper.

• Journal of the Optical Society of Korea
• /
• v.14 no.2
• /
• pp.137-141
• /
• 2010

We report, for the first time to our knowledge, observation of polarization bistability from 1.55-${\mu}m$ wavelength single-mode VCSELs of a conventional cylinder-shape under control of their driving current, and demonstration of all-optical flip-flop (AOFF) operations based on the bistability with optical set and reset pulse injection at a 50 MHz switching frequency. The injection pulse energy was less than 14 fJ. The average on-off contrast ratio of the flip-flopped signals was about 7 dB. These properties of the VCSELs will be potentially useful for future high-speed all-optical signal processing applications.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.924-926
• /
• 1999

To reduce chattering in sliding mode control, a boundary layer around the sliding surface is used, and a continuous control is applied within the boundary. In this paper, a method of determining the sliding mode controller switching gains and the width of boundary layer is presented. Contrary to the trial and error selection of the switching gains and the width of boundary layer, the selection in the presented work is done using genetic algorithms. Simulation results show that the system performance has been improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.162.1-162
• /
• 2001

In this paper, the adaptive fuzzy system is used as an adaptive approximator for robot nonlinear dynamic. A theoretical justification for the adaptive approximator is proving that if the representive point(RP or switching function) and its derivative in sliding mode control are used as the inputs of the adaptive fuzzy system, the adaptive fuzzy system can approximate robot nonlinear dynamics in the neighborhood of the switching surface. Thus the fuzzy controller design is greatly simplified and at the same time, the fuzzy control rule can be obtained easily by the reaching condition. Based on this, a new method for designing an adaptive fuzzy control system based on sliding mode is proposed for the trajectory tracking control of a robot with unknown nonlinear dynamics.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.93-98
• /
• 2000

Drive line shape for reflective magneto-optic spatial light modulator has been designed by computer simulation. A factor of 3 improvement in pixel switching sensitivity and power consumption, compared to the conventional reflective magneto-optic spatial light modulator, has been achieved by the use of wedge-shape drive line and a soft magnetic layer. A factor of 2 higher optical efficiency and a factor of 2 simpler fabrication process have been achieved by the use of drive lines that covers most of the surface of pixel and unpatterned insulator.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.359-360
• /
• 2009

This paper reports experimental results on temporal characteristics of injection-locked polarization switching of a conventional type 1.55-${\mu}m$ wavelength single-mode vertical-cavity surface-emitting laser (VCSEL). The polarization of external injection beam was kept orthogonal to main mode of VCSEL. The relation for variation of intensity of two polarization modes of VCSEL with wavelength detuning for various repetition rates of injection pulse is reported.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.149-151
• /
• 2007

For several decades, VSC has gained much attention as one of the useful design tools for handling the practical system with uncertainties or disturbances. Generally, the disturbances in the matching condition can be perfectly rejected via VSC; however, these in the mismatching condition are known to be hardly rejected. There have been some trials on it, in which the resulting controls in fact belong to the class of robust control guaranteeing disturbance ${\gamma}$-attenuation. Therefore, in this paper, we propose a new Variable Structure Control (VSC) for a system with mismatched disturbances. The proposed controller is composed of linear and nonlinear parts; the former plays a role in stabilizing the system and the latter takes care of attenuating the disturbances. The main contribution is to introduce the concept of switching-zone, rather than switching-surface, that is designed through piece-wise Lyapunov functions. The resulting non-convex conditions are formulated with an iterative linear programming algorithm, which provides an excellent performance of almost rejecting the disturbances.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1028-1032
• /
• 2005

Liquid crystal (LC) alignment using a photoalignment method by irradiation of polarized ultraviolet (UV) on an alignment layer has been investigated. Photoalignment method exhibits weaker anchoring energy than rubbing method so that we have studied electro-optic characteristics of fringe-field switching (FFS) mode with alignment layers using the photo and rubbing alignment methods. The cell using photo alignment layer shows lower threshold and operation voltage than those using rubbed alignment layer. Also, the former method shows higher transmittance than that of the latter.