• 전기학회논문지P
• /
• 제60권3호
• /
• pp.138-143
• /
• 2011

Electric locomotive is adapted to high speed driving and mass transportation due to obtaining high traction force. The electric locomotive is operated by motor blocks and traction motors. Train speed is controlled by suppling power from motor blocks to traction motors according to reference speed. Speed control of the electric locomotive is efficient by spending energy between motor blocks and traction motors. Currently, switched reluctance motors have been studied because the efficient is higher than induction motors. In this paper, model of the switched reluctance motor is presented and the PID controller is applied to the model for the speed control by using Simulink. Asymmetry converter is used for real-time control and system performance is demonstrated by simulating the speed of switched reluctance motor including PID controller.

• 전기학회논문지P
• /
• 제60권3호
• /
• pp.144-149
• /
• 2011

Currently, switched reluctance motors are studied to increase energy efficient. The switched reluctance motor is possible to control higher speed and torque than the induction motors and composition is simple. Current and rotor speed are considered to install the switched reluctance motor. In this paper, Simulink model of the switched reluctance motor is suggested and the adaptive controller is applied to the model for the speed control. Asymmetry converter including the IGBT is concerned with real-time control and the speed of switched reluctance motor is controlled by installing adaptive controller.

• 한국인터넷방송통신학회논문지
• /
• 제21권3호
• /
• pp.137-142
• /
• 2021

최근에는 회전자에 희토류 영구자석을 삽입하여 높은 효율과 출력밀도를 얻을 수 있는 매입형 영구자석 (IPM: Interior Permanent Magnet) 전동기 또는 표면부착형 영구자석 (SPM : Surface Permanent Magnet) 전동기처럼 영구자석이 사용된 전동기의 연구가 활발히 이루어지고 있다. 영구자석을 사용하기 때문에 릴럭턴스 전동기나 유도전동기와 비교해 효율이 높고 출력밀도가 높은 장점이 있으나 회전자에 영구자석을 삽입함으로써 고속운전 및 영구자석의 감자로 인한 신뢰성 감소, 희토류 금속의 원가 상승 등이 문제시되고 있다. 본 논문에서는 희토류 영구자석 전동기를 대체할 수 있는 미래기술 개발과, 희토류 저감형 전동기와 탈 희토류 전동기의 기술 선점을 요구하는 시대적 이슈(Issue)에 맞춰 영구자석이 필요 없는 스위치드 릴럭턴스 전동기 (Switched Reluvtance Motor, SRM)를 구동시키기 위한 구동 제어에 연구하고자 한다. PSIM 시뮬레이션 프로그램에서 제공하는 3상 SRM library를 이용하여 회전자 위치 정보 센서를 이용한 SRM의 구동 및 제어 시스템 모델링 (Modeling)을 연구하고자 한다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.114-121
• /
• 2004

Switched reluctance motors have received much attention as a driving means for various industrial applications because they have simple construction, low cost and high efficiency. Nevertheless, the requirements of drive converters make it difficult to lower the overall system cost as compared with the DC motor application. Single phase switched reluctance motors (SPSRMs) provide a solution to the high cost problem since the number of switching power devices can be reduced and consequently the trials for application are increased. However, research involving SPSRMs, especially in the area of design work, is insufficient. This paper introduces a novel design methodology of single phase SRM. The design work for SPSRM comprises the determination of many variables such as stator and rotor pole arc as well as on, off and so on. Managing all variable combinations leads to lengthy computation time and a fault in the design process. For that reason, a reliable technique and brief procedure term are required in SPSRM design.

• 한국인터넷방송통신학회논문지
• /
• 제21권4호
• /
• pp.117-122
• /
• 2021

영구자석 동기전동기는 높은 출력밀도와 효율 확보가 가능하나, 제작에 필요한 재료의 가격이 비싸고 설계가 유도전동기 대비 다소 어려운 문제점을 가지고 있다. 따라서 효율 및 유지보수 편의성 등이 모두 고려된 최적의 전동기 개발 및 관련 제어연구가 필요한 실정이다. 뿐만 아니라, 실질적인 전동기에 의한 구동은 좁은 정격영역에서의 최고효율의 증대 요구와 전체 전기구동 영역에서의 평균 효율 증대, 평균 출력의 증대 요구로 이어지고 있다. 이러한 움직임에 의해 영구자석이 필요 없는 릴럭턴스 전동기 (Reluctance Motor)가 하나의 대안으로 검토되고 있다. 본 논문에서는 희토류 영구자석 전동기를 대체할 수 있는 미래기술 개발과, 희토류 저감형 전동기와 탈 희토류 전동기의 기술 선점을 요구하는 시대적 이슈 (Issue)에 맞춰 영구자석이 필요 없는 스위치드 릴럭턴스 전동기 (Switched Reluvtance Motor, SRM)에 대해 기계언어(C 언어)를 통한 modeling과 그에 따른 SRM의 특성을 연구하고자 한다.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1511-1518
• /
• 2014

Demand for high fuel efficiency and smart features of the vehicles, research has been intensified. Hence, research and development on electric power steering (EPS) system to replace the existing hydraulic steering system has been actively conducted. Permanent magnet motors are widely used in automotive applications due to their high power density and high efficiency. However, increasing price and limited production of rare-earth permanent magnets has recently prompted the auto parts makers to substitute permanent magnet motors by non- or less rare earth magnet motors. Switched reluctance motors SRMs), known as typical non-rare earth motors have simple structure, low manufacturing cost, and high reliability. This paper discusses design, modeling, simulation, and experimental verification of a prototype SRM drive for electric power steering system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1291-1293
• /
• 2005

Switched reluctance motors have the advantage a high torque/weight ratio, as the large reluctance torque is made by salient poles of both stator and rotor, and a high reliability. On the other hand, the switched reluctance motors have the disadvantage of a large ripple torque which is made by salient poles. So the application for the industrial fields have been limited to special cases. This paper describes the design of a 12/8 switched reluctance motor using a enemy layer method of the asymmetry rotor. The design is focussed to reduce the torque ripple and radial force in the demanded value. The three dimension finite element analysis method(3D-FEM) was used for decides a enemy layer angle of the asymmetry rotor. This paper presents modifications of the rotor pole shape which reduces the torque ripple.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.232-232
• /
• 2000

switched reluctance motors and drives are increasingly used in industrial applications due to their robust mechanical structure, low inertia and reduction in the rotor losses. As the motor speed increase turn on angle must be advanced to build up phase current. When C-dump converter is applied to switched reluctance motor, the capacitance of dump C has to have proper value. In this paper advance angle for a switched reluctance motor and capacitance of dump C are investigated. Then proper advance angle and the capacitance of dump-C are propose for the industrial low voltage SR motor.

• Journal of Power Electronics
• /
• 제6권4호
• /
• pp.315-321
• /
• 2006

Switched Reluctance Motors (SRM) have emerged as viable alternatives to other adjustable speed drives such as vector controlled induction motors (VCIM) and permanent magnet brush-less (PMBL) motors due to their simple construction, ease of control, low inertia and higher operating speeds. However, the indispensability of the rotor position sensor in an SRM for its successful operation increases its cost, apart from causing other problems like decreasing its reliability and inability to operate in adverse environmental conditions. In this paper, a new sensorless control scheme for the SRM is advocated. The required fundamental data is obtained by analyzing the SRM using the Finite Elements (FE) package MAXWELL. The drive is studied in both 'with sensor' and 'sensorless' modes and a comparison of the performances, in both cases, is presented for various operating conditions.

• 전력전자학회논문지
• /
• 제2권2호
• /
• pp.49-56
• /
• 1997

스위치드 리럭턴스 전동기(switched reluctance motor : 이하 SRM 이라 칭함)는 가변 인덕턴스 프로파일의 비선형성과 리플성분이 포함된 펄스전류에 구동되는 본질적인 특성 때문에 토오크는 맥동성분을 포함한다. 본 논문에서는 토오크의 맥동에 영향을 미치는 전류파형 형태를 고찰하고, 속도나 부하에 관계없이 어드밴스 각(advance angle)와 여자전압을 제어함으로써 토오크 맥동을 저감할 수 있는 단일 펄스모드 스위칭 제어방법을 제안하였다. 그리고 설계 제작된 6/4 SRM을 이용하여 제안한 스위칭 제어방법의 타당성을 실험적으로 확인하였다.