• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.88-90
• /
• 2003

SRM has a characteristic of a robust, simple structure and wide operating ranges. So, recently it has studied and developed in many kinds and forms with the technology of power electronics and analysis and design by use of computer. Also, It is used in a very wide range of industrial applications. In particular, single phase switched reluctance motor has a merit in practical use because it has simple operating drives and control systems, very high energy density per unit volume comparing with three phase SRM. But it must have a starting device. In this paper design procedures of single phase SRM development for blower drives are presented. It is selected the design parameters by compared with design theory of general electric machine and poly phase SRM. Also it is simulated the designed prototype model by FEM for the prediction of characteristics.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2016

In this study, two types of switched reluctance motors (SRMs) with segmental rotors are presented in detail. The first is a 6/5 segmental rotor type, whereas the second is a 12/8 segmental rotor type. Both motor types have the same stator, rotor, and winding configurations. The stator is constructed with special stator poles, namely, exclusively designed exciting and auxiliary poles. The rotor is constructed from a series of discrete segments, each of which is embedded into the nonmagnetic isolator. The windings are only wound on the exciting poles, and no winding is wound on the auxiliary poles. Given these configurations, short flux paths and high flux-linkage utilization rate are achieved in the proposed motors, which may reduce the magnetomotive force requirement and increase the electrical utilization of a machine. To verify the effectiveness of the proposed motors, their characteristics, such as magnetic flux distribution, flux-linkage, torque, radial force, and efficiency, are analyzed and compared with those of a conventional 12/8 SRM. Meanwhile, two prototypes, one for each proposed segmental rotor type, are also designed and manufactured. Finally, the validity of the proposed motors is further verified by test results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.649-651
• /
• 2015

This paper describes a robust adaptive sliding mode control (RASMC) for torque ripple minimization of switched reluctance motor (SRM) using it in automotive application. The objective is to control effort smoothness while the system is under perturbations by unstructured uncertainties, unknown parameters and external disturbances. The control algorithm employs an adaptive approach to remove the need for prior knowledge within the bound of perturbations. This is suitable for tackling the chattering problem in the sliding motion of sliding mode control method. The algorithm then incorporates modifications in order to build a chattering-free modified robust adaptive sliding mode control using Lyapunov stability theory.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권7호
• /
• pp.369-373
• /
• 2006

In this paper, an optimal method for determining design parameters of a Switched Reluctance Motor is researched. The dominant design parameters are stator and rotor pole arc and switching on and off angle. The parameters affecting performance are examined and selected using evolutionary computations and commercial CAD program. The simulated design method is compared with conventional procedure.

• 전력전자학회논문지
• /
• 제6권4호
• /
• pp.333-340
• /
• 2001

본 연구는 SRM의 토크 특성해석과 구동에 필요한 인덕턴스의 산정에 관한 연구이다. SRM의 토크 특성은 인덕턴스 와 전류의 변화로서 나타 낼수 있으나, 자기회로의 비선형적인 특성으로 정확한 인덕턴스 산정은 어려움이 있다. 최근에는 인덕턴스 산정을 위하여 FEM해식이나 피팅계수법이 많이 적용되고 있다. 그러나 FEM에 의한 방법은 많은 시간이 소요되며 구조변경에 따라 재해석이 요구되어진다. 피팅 계수법에 의한 방법은 측정된 인덕턴스에 의해 추정되는 값임으로 초기의 측정이나 해석에는 어려움이 따른다. 본 논문에서는 설계시 얻어지는 간단한 기계구도의 치수를 이용하여 계산에 의한 인덕턴스를 산정하는 간단한 기계구조의 치수를 이용하여 계산에 의한 인덕턴스를 산정하는 간단한 모델과 방법을 제시하였다. 제시된 산정방법의 검증을 위하여 연구 제작된 1[Hp]전동기에 적용하여 FEM해석과 측정에 의한 방법을 각각 비교 검토하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.325-327
• /
• 1998

Disk type single-phase switched reluctance motor which has an advantage of simple robust construction, simple control circuity, and low manufacturing cost has a specific property of axial flux machine and radial flux machine simultaneously. So, this DSPSRM has a complicated magnetic circuit and it is difficult to analyze characteristics of DSPSRM for design. In this paper, we used to analyze the effects of radial flux and axial flux simultaneously by 3D-finite element method. From the results of 3-D FEM, we obtained the approximated torque characteristics of DSPSRM. It's analysis results can be used in optimal design of DSPSRM considering the saturation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.186-189
• /
• 2004

Switched reluctance machine has much attention because of high efficiency, high power and DC series torque characteristics with a traction drive. But the motor has to have a regenerative mode when it is adopted in an electric vehicle. A current divergence during the regeneration makes difficulties in the control of SRM. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimental tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are executed to verify proposed method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.505-506
• /
• 2015

In this paper, two types of switched reluctance motors (SRMs) with segmental rotors are presented in detail. One is 6/5 segmental rotor type; the other is 12/8 segmental rotor type. Both motors have the same stator, rotor and winding configurations. The stator is constructed with special stator poles in which the exciting and auxiliary poles are designed exclusively. The rotor is constructed from a series of discrete segments, each of which is embedded in the magnetic isolator. The windings are only wound on the exciting poles, and no windings are wound on the auxiliary poles. These structures result in short flux path and high flux-linkage utilization in the proposed motors, which may reduce the magneto motive force (MMF) requirement and increase the electrical utilization of the machine. To verify the proposed two structures, the characteristics of the proposed two types are analyzed and compared with that of conventional 12/8 SRM.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.1-8
• /
• 2000

Switched reluctance motor(SRM) has simple magnetic structure, and requires simple power electronic driving circuit. It is very useful for wide range adjustable speed drive system. But, SRM drive generates large vibration and acoustic noise because it is commutated individually by step pulse m.m.f of each phase pole. In the vibration and acoustic noise characteristics. The considerable vibration and noise is induced by radial deforming of stator, so the frequency of dominant vibration and noise is coincident with the frequency of natural mode frequency of mechanical structure. This radial vibration force is generated in the phase commutation region. This paper suggests the new electromagnetic structure of SRM with auxiliary commutation winding which is excited by direct current. This phase and commutation winding are coupled magnetically between one phase winding and the other. Therefore, the switch-off phase current is absorbed by the another phase winding. By this interaction of phase and commutation winding in commutation mechanism, vibration and noise is reduced. And this reduction effect is examined by the test of prototype machine. As a result, SRM with DC exciting commutation winding is very useful to reduce vibration and acoustic noise.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.866-868
• /
• 2004

The flux-reversal machine(FRM) is a new brushless doubly-salient permanent-magnet machine combining the advantages of the switched-reluctance machine(SRM) and the permanent-magnet machine(PMM) into one machine. FRM has a naturally low inductance, therefore, a low electrical time constant. This feature, combined with its simple construction and low rotor inertia appear to make the FRM attractive as a low-cost high-speed machine. For high-speed applications, two alternative commutation strategies are studied, one using the phase commutation advancing technique and another using the conducting pulse-width control. This paper describes the techniques and reports the corresponding simulated and experimented performance