• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.170-177
• /
• 2020

본 논문은 HF/LF 변조 방법을 적용한 ANPC (active neutral point clamped) 인버터의 스위치 개방 고장에 대응하기 위한 허용 제어 방법을 제안한다. 기존 Si 기반 인버터에 비해 SiC MOSFET과 Si IGBT로 구성된 ANPC 인버터는 시스템의 효율이 높고 출력 품질이 우수하다. HF/LF 변조는 커뮤테이션 루프를 줄일 수 있어 MW 급 대용량 인버터를 위해 사용되는 변조 기법이다. MW 급 인버터의 스위치 개방 고장은 부하에 심각한 손상을 입히며, 인버터가 동작을 멈출 경우 막대한 경제적 손실을 야기한다. 제안하는 스위치 개방 고장의 허용 제어 기술은 ANPC 인버터의 지속적인 운전을 가능하게 하며 신뢰성을 향상 시킨다. 제안하는 기법의 성능은 시뮬레이션 결과를 통해 검증한다.

• 한국컴퓨터산업학회논문지
• /
• 제2권4호
• /
• pp.547-564
• /
• 2001

본 논문에서는 EPRCA(Enhanced Proportional Rate Control Algorithm) 스위치 방식과 EMRCA(Explicit Max_min Rate Control Algorithm) 스위치 방식의 성능을 평가하기 위하여 시뮬레이션을 수행하였다. 시뮬레이션의 평가 기준으로 과도상태와 정상상태에서 각 송신원에서의 전송률(ACR)의 변화, 큐 길이, 링크 대역폭 이용률과 전송률의 공평성 여부를 사용하였다. 실험 결과 EMRCA 스위치 방식은 EPRCA 스위치 방식보다 더 안정적이며 스위치의 버퍼 크기도 줄였으며 더 높은 링크 이용률을 보였다. 이 방식은 스위치에서 MACR(Mean Allowed Cell Rate)의 계산을 위한 부동소수점 연산을 제거하여 EPRCA 스위치 방식이나 기존의 다른 폭주 제어 방식들보다 훨씬 낮은 하드웨어 복잡도를 갖는다.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1157-1165
• /
• 2014

The T-type topology is a three-level topology that has an advantage in terms of its number of switching device and its efficiency when compared to the neutral-point clamped (NPC)-type topology. With the recent increase in the usage of the T-type topology, the interest in its reliability has also increased. Therefore, a tolerance control for a T-type rectifier is necessary to improve the reliability of applications when an open-switch fault occurs. NPC-type rectifiers cannot eliminate input current distortion completely. However, the T-type rectifier is able to restore distorted current. In this paper, a tolerance control for the $S_{x2}$ and $S_{x3}$ open-switch faults of a T-type rectifier is proposed where it is advantageous in terms of efficiency when compared with other tolerance controls. The performance of the proposed tolerance control is verified through simulation and experimental results.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1337-1340
• /
• 2009

Electrical properties of a fluorinated carbon black (CB)-filled high-density polyethylene (HDPE) polymeric switch were investigated as a function of fluorination pressure at 0.1 ~ 0.4 MPa. From the FT-IR results, the absorption spectra of the fluorinated CB show an absorption band at 1400 ~ 1000 $cm^{-1}\;for\;{\nu}_{C-F}$ and the peak intensity increased with increasing fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content increased with increasing fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB decreased with increasing fluorination pressure. Consequently, the increase of fluorine contents of CB made a disappearance of negative temperature coefficient (NTC) behavior of the polymeric switch, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulted from the decreasing of London dispersive component of the surface free energy for CB particles.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4509-4514
• /
• 2010

본 논문에서는 전기선로전환기의 유지보수 방법을 개선하기 위해 당초 연구 개발한 선로전환기 모니터링시스템을 시험 운용한 결과 보수방법 향상 효과를 확인 할 수 있었다. 그러나 보수자가 배치되지 않은 무인 연동역의 경우 선로전환기 장애 발생 시 또는 유지보수를 위하여 현장에 출동하기 전 까지는 보수 및 점검이 불가능하였다. 이러한 문제점을 개선하기 위하여 모니터링시스템에 원격지 컴퓨터와 통신할 수 있는 제어 모듈을 내장하여 선로전환기 전환 시에 원격지 컴퓨터에서 명령하는 제어정보를 수신하고 선로전환기가 전환된 후의 표시 정보 및 특히 장애 발생시의 상태를 모니터링시스템에 표출하도록 구성하여 원격지에서 관리할 수 있도록 성능을 향상시킴으로써 장애발생시 신속한 대응 체계 구축으로 유지보수의 효율성 및 편의성이 증대 될 것으로 예상된다.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.65-72
• /
• 2016

Network virtualization is an emerging technology for solving the rigidity of the physical network infrastructure. The innovative technique virtualizes all resources in the network, including the network links and nodes, and provides a number of virtual networks on a single network infrastructure. In order to realize a virtual network, a thorough and complete monitoring of all resources in the network should be performed firstly. OpenFlow is an open source stack for network virtualization. However, it is impossible to apply OpenFlow to AP-based legacy wireless LAN environment because OpenFlow targets ethernet-based LAN environment. In this paper, we implement an adaptor-styled virtual switch for AP-based wireless LAN through customizing the Open vSwitch which is a virtual switch of OpenFlow. The evaluation test results show that the implemented OpenFlow stack operates successfully. The implemented OpenFlow stack can now be plugged immediately in existing AP-based wireless LAN environment and plays network resource monitoring. In the future, we can develop wireless LAN virtualization applications on the wireless OpenFlow stack.

• Bulletin of the Korean Chemical Society
• /
• 제22권8호
• /
• pp.903-908
• /
• 2001

The gene aeg-46.5, which is expressed under anaerobic condition, has putative triple -10 regions and four transcription start sites. The mRNA transcription level and its start point change depending on the aerobic/anaerobic growth condition. RNA polymerase and its regulatory proteins must choose which of three -10 region to use. The putative triple 10 region was mutated to make only one of them function with consensus -10 region sequence (TATAAT) and the other two as non-functional region. The results show that the second and third -10 regions are used for the aerobic/anaerobic expression. The third -10 region is responsible for the high aerobic to anaerobic switch ratio. This suggests that only the last two of the putative triple -10 region have functions on aeg-46.5 gene expression switch control. The phenotype of the mutated promoter was tested in the wild type cell and narL - cell. The results indicate that the control by NarL is independent from the selection of -10 region. The expression patterns on multi-copy plasmids and on single-copy chromosome were compared. These results show that the aerobic/anaerobic switch control of aeg-46.5 is through the choice of -10 region. The mechanism of choosing different -10 region remains to be seen.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권11호
• /
• pp.3680-3693
• /
• 2022

The handover procedure of IEEE 802.11 wireless local area networks (WLANs) introduces significant delay, which can degrade the quality of service (QoS) especially for delay-sensitive applications. Although studies have been conducted to support handover in SDN-based WLAN, there is no research to reduce the channel scanning procedure that takes up the most delay time in the handover process. The channel scanning procedure is essential to determine the appropriate access point (AP). To mitigate this problem, this paper proposes a SWITCH: SDN-WLAN integrated handover scheme for QoS-Guaranteed mobile service. In SWITCH, each AP periodically broadcasts beacon frames through different channels in a predetermined order that includes the operating channel information of the AP. This allows mobile stations (MSs) to receive the beacon frames of nearby APs, and therefore they can determine the appropriate APs for handover without the channel scanning procedure. By reporting the information of the newly moved AP to the SDN controller, a flow rule is installed in advance to provide fast handover, and packet loss is reduced by buffering data destined for MS. In addition, the proposed scheme can adaptively operate SWITCH to consider the user location and QoS requirement of flow to save radio resource overhead. Performance evaluation results demonstrate that SWITCH can reduce the handover delays, flow table utilization ratio and radio resource overhead while improving the network throughput.

• 전기의세계
• /
• 제28권12호
• /
• pp.41-45
• /
• 1979

Improvement of power factor is achieved by reactive-current compensation, connecting power condenser to the circuit. This paper describes a method of reactive-current compensation, employing thyristor switching of capacitor banks without any breaker. This method reduces supply transients to the minimum by means of connecting condenser, because thyristor is triggered at zero point in condenser current. The reactive current detection and the experimental system to trigger thyristor at appropriate moment are given. IThe results show the fast reactive-current compensation on the condition of minimum transient.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.257-265
• /
• 2014

This paper proposes a simple compensation method for switches of the unclamped voltage in the three-level NPC inverter. Voltages of inner-switches can be unclamped in the three-level NPC (neutral point clamped) inverter. It can cause the problem of the switch fault accident. By adding a capacitor, switches of the unclamped voltage can be clamped. Through the analysis of the circuit, the reason behind switches being unclamped was verified which leads to the solution method that designs a compensation capacitor. The proposed method was validated through the simulation and experimental results.