• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1912-1919
• /
• 2018

The output capacitance of power semiconductor devices is important in determining the switching losses and in the operation of some resonant converter topologies. Thus, it is important to be able to accurately determine the output capacitance of a particular device operating at elevated power levels so that the contribution of the output capacitance discharge to switch-on losses can be determined under these conditions. Power semiconductor switch manufacturers usually measure device output capacitance using small-signal methods that may be insufficient for power switching applications. This paper shows how first principle methods are applied in a novel way to obtain more relevant large signal output capacitances of Gallium-Nitride (GaN) FETs using the drain-source voltage transient during device switch-off numerically. A non-linear capacitance for an increase in voltage is determined with good correlation. Simulations are verified using experimental results from two different devices. It is shown that the large signal output capacitance as a function of the drain-source voltage is higher than the small signal values published in the data sheets for each of the devices. It can also be seen that the loss contribution of the output capacitance discharging in the channel during switch-on correlates well with other methods proposed in the literature, which confirms that the proposed method has merit.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.22-27
• /
• 2020

In this paper, a generalized efficiency equation was proposed to estimate the internal loss of the SMPS (switched-mode power supply) with 3 variables. The first variable was an internal loss not related to the load current such as auxiliary power, the second was a loss proportional to the current such as diode loss, and the third was a loss proportional to square of the current such as conduction loss. Especially, theoretical internal losses of the totem pole bridgeless PFC which is widely used for high efficiency SMPS were expressed as output function to compare generalized efficiency equation. In addition, in order to reduce the conduction loss of the switch, when a multiple switch were paralleled, the correlation with the efficiency was analyzed and shown as a graph. In order to confirm the degree of the parallel switch structure on the efficiency improvement, a 2kW class totem pole bridgeless PFC was constructed and the effectiveness of the analysis was confirmed by comparing the generalized efficiency equation and theoretical loss analysis results with experimental data.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권1호
• /
• pp.60-65
• /
• 2017

Network virtualization enables us to make efficient use of resources in a physical network by embedding multiple virtual networks in the physical network. In this paper, we develop a prototype of a virtual network embedding system. Our system consists of OpenStack, which is an open source cloud service platform, and shell scripts. Because OpenStack does not provide a quality of service control function, we realize bandwidth reservation for virtual links by making use of the ingress policing function of Open vSwitch, which is a virtual switch used in OpenStack. The shell scripts in our system automatically construct the required virtual network on the physical network using the OpenStack command-line interface, and they reserve bandwidth for virtual links using the Open vSwitch command. Experimental evaluation confirms that our system constructs the requested virtual network and appropriately allocates node and link resources to it.

• 서비스연구
• /
• 제5권1호
• /
• pp.57-70
• /
• 2015

본 논문에서는 라우터의 라우팅 기능, L7스위치의 컨텐츠 기반 보안, IPS 침입 방지 시스템의 기능과 클라우드, 빅데이터 기술을 혼합한 새로운 형태의 패턴분석 패킷 필터링 방화벽 장비를 저가형 임베디드 장비에서 구현해 SOHO(소규모 창업) 및 소규모 회사 또는 일반 가정의 보안 수준을 개선하고 새로운 시장을 개척하는 것을 목표로 하며, 또한, 고성능 스위치 및 기존 보안장비 기능 대체를 목표로 해 개발하고, 저 사양 장치에서 고성능 시스템을 구현할 수 있는 새로운 차세대 알고리즘을 제시한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.80-82
• /
• 2007

In this paper, we proposed new maximum electric power tracking algorithm by composing Buck-boost chopper circuit to charge electric power from wind energy generator which is under low and high wind velocity. The break function is also proposed with the existed buck-boost chopper switch. We made a proto-type as a lab level to verify appropriateness of using proposed circuit.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.466-474
• /
• 2014

본 논문에서는 여러 가지 광 스위치들의 기능, 구조 및 장단점들을 비교 분석하여 이를 토대로 광 스위치를 선택하고, 이 스위치 모듈에 있는 파장변환기를 이용하여 블록킹을 피하기 위한 회선 경합 회피 스위칭 실험을 하였다. 스위치 패브릭의 성능을 평가하는 기본적인 기준은 넌블록킹(nonblocking), 모듈성(modularity), 업그레이드 능력(upgrade ability) 그리고 광 손실(power loss)인데 이들을 종합적으로 분석 평가하여 스위치를 선택하였다. 이렇게 선택된 스위치 패브릭은 블록킹 발생을 피하기 위한 3가지의 경우에 대하여 파장 변환을 통한 스위칭을 함으로써 회선경합 회피를 할 수 있음을 보여주었다. 이 실험의 결과는 파장 변환기의 제어를 통하여 경로를 바꾼 광신호가 출력단에서 바뀐 광파워(power)의 피크임을 보여줌으로써 라인 경합을 피하여 스위칭 되었음을 확인하였다. 또한 스위치보드에서 시간에 따른 광 파워의 변화를 분석하여 스위칭에 필요한 스위치의 채널 설정 시간과 해제 시간을 알아내었다. 이에 대한 분석 결과를 망설계시 반영하면 경제적이고 효율적인 네트워크 구조로 디자인할 수 있다.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.28-35
• /
• 1998

In this paper, an NxN input-buffered crosspoint packet switch which selects a Head of the Line, HOL, packet in contention randomly is analyzed with a new approach. The approach is based on both a Markov chain representation of the input buffer and the probability that a HOL packet is successfully served. The probability as a function of N is derived, and it makes it possible to express the average packet delay and the average number of packets in the buffer as a function of N. The contention resolution policy based on the occupancy of the input buffer is also presented and analyzed with this same approach and the relationship between two selection policies is analyzed in terms of the occupancy of the input buffer.

• 한국안광학회지
• /
• 제6권1호
• /
• pp.81-85
• /
• 2001

색각은 광 수용체인 3개 R. G. B cone의 파장흡수와 대립과정의 r-g, y-b 채널에 의해 이루어진다. 전기적 회로에 의한 색각 이상 mechanism은 photo cell, relay switch, transformer로 구성하였다. 추체(cone)의 R 또는 G가 결손 된 경우 y-b chromic valence 함수가 되고, 추체의 B가 결손 된 경우는 r-g chromic valence 함수가 되어 색각 이상 mechanism을 잘 적용된다.

• Nuclear Engineering and Technology
• /
• 제35권2호
• /
• pp.133-143
• /
• 2003

Stem-stem nut coefficient of friction(COF) in motor-operated gate/globe valves is one of the important factors which determine the performance of the valve/actuators. The COF is affected greatly by the type and condition of the stem-stem nut lubricants, environmental parameters, surface condition of the stem/stem-nuts, and the number of strokes after the lubrication. In this paper, the measured data of the COFs at stem threads of some safety-related motor-operated gate/globe valves in domestic nuclear power plants are presented. In addition, the performance of the lubricants is evaluated by comparing the COFs among those valves. The results show that the measured COF at torque switch trip are higher than the unwedging COF and conservatively applicable to the unwedging COF. It is also shown that the lubricating performance based on the measured COFs varies with the lubricants.

• 정보처리학회논문지C
• /
• 제9C권1호
• /
• pp.65-72
• /
• 2002

본 논문에서는 ATM 기반 MPLS(Multi-Protocol Label Switch)망에서 라우터의 레이블 공간을 효율적으로 사용하여 망의 확장성을 높이기 위한 방안인 레이블 통합 기능이 탑재된 고속 Crossbar Switch론 구현한다. 차등서비스(Differentiated Service)와 레이블 통합 기능을 동시에 수행 할 수 있는 적합한 하드웨어 구조를 제안한다. 본 논문에서는 각 코어 LSR(Label Switch Router)의 출력버퍼에서 망 폭주 발생 가능성이 있을 시 EPD(Early Packet Discard) 알고리즘을 통한 적응적 폭주 제어 방법을 사용하므로써 네트워크 자원의 낭비론 막았으며, 제안한 VC(Virtual Channel)-merge 기법의 정당성을 입증하기 위하여 Non VC-merge 기법과의 비교 분석을 시뮬레이션을 통하여 수행하였다. 제안한 VC-merge가능한 스위치는 VHDL로 모델링하여 합성 설계하고, 삼성 0.5m SOG 공정으로 팁을 제작하였다.