• Wind and Structures
• /
• 제7권6호
• /
• pp.421-447
• /
• 2004

This paper presents a time domain approach for predicting buffeting response of long suspension bridges under skew winds. The buffeting forces on an oblique strip of the bridge deck in the mean wind direction are derived in terms of aerodynamic coefficients measured under skew winds and equivalent fluctuating wind velocities with aerodynamic impulse functions included. The time histories of equivalent fluctuating wind velocities and then buffeting forces along the bridge deck are simulated using the spectral representation method based on the Gaussian distribution assumption. The self-excited forces on an oblique strip of the bridge deck are represented by the convolution integrals involving aerodynamic impulse functions and structural motions. The aerodynamic impulse functions of self-excited forces are derived from experimentally measured flutter derivatives under skew winds using rational function approximations. The governing equation of motion of a long suspension bridge under skew winds is established using the finite element method and solved using the Newmark numerical method. The proposed time domain approach is finally applied to the Tsing Ma suspension bridge in Hong Kong. The computed buffeting responses of the bridge under skew winds during Typhoon Sam are compared with those obtained from the frequency domain approach and the field measurement. The comparisons are found satisfactory for the bridge response in the main span.

• International Journal of Railway
• /
• 제4권4호
• /
• pp.93-96
• /
• 2011

The basic element of the EMS suspension is the electromagnet system, which suspends the vehicle without contact by attracting forces to the rails at the guideway. The suspension of a vehicle by attractive magnetic forces is inherently unstable and consequently it is continuously adjusted by the strength of the suspending electromagnet from rail irregularity and bending of the guideway. In order to improve reliable tracking, it needs to get feedback signals without measurement delay time. In this paper the concept of feedback control system with Kalman Filter in EMS is proposed. The input signals in the feedback control system are an air-gap and an acceleration signal. The air-gap signal with noise from the gap sensor is transformed to the filtered air-gap signal y without measurement delay time by using Kalman Filter. The filtered air-gap signal is transformed to a relative velocity and a relative acceleration signal. Then it multiplies these values by gain matrix in order to get the actuator's reference voltage value. The simulation results show that the dynamic responses of the suspension system can be improved by reducing the influence of measurement delay time of air-gap signals.

• 한국지진공학회논문집
• /
• 제8권6호통권40호
• /
• pp.1-11
• /
• 2004

이전의 연구(1)에서는 해석적 및 수치적 방법을 사용하여 전단변형 및 회전관성효과를 고려하는 현수교의 수직진동에 대하여 유한요소법을 이용하여 이동하중 해석을 수행하였다. 본 연구에서는 전단변형 및 회전관성 효과가 고려된 Hermitian 다항식을 사용하는 현수교요소를 이용하여 현수교의 수직진동에 대한 고유치 해석을 수행하고 이를 이용한 현수교요소와 차량 및 열차와의 상호작용을 고려한 운동방정식을 유도한다. 이와 같이 모드중첩법을 이용하여 유도된 운동방정식을 수치적분방법으로 Newmark $\beta$ Method를 사용하여 동적해석을 수행하였다.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.99-107
• /
• 1998

Stress distribution analysis was implemented by using finite element method for the lower arm connecting Independent front suspension. Results were obtained for the 8 load conditions and for the 3 types of section (I, H and H+I). On the basis of it, the shape and dimensions of lower arm were optimized. Finally it was pointed out that the H type has an most satisfied strength, among 3 section types and highest safety factor and yield strength in each case of load condition.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.231-236
• /
• 2009

Recently, The Hydroforming technology has recognized general technique in manufacture industry. Especially automotive industry, It has applied to increase strength, and decrease weight, cost and part number. The rigid axle suspension type is widely used for truck and bus in commercial vehicles due to simplicity. To develop the hydroforming rigid axle, it is necessary to estimate of the characteristics of front suspension from the design process. In this study, the characteristics estimation of the hydroforming rigid axle is preformed using Finite Element Analysis and apply to shape optimization.

• 소성∙가공
• /
• 제17권4호
• /
• pp.263-271
• /
• 2008

Process design is carried out for a press forming of a CTBA in the rear suspension assembly based on the result of the finite element analysis. The analysis simulates the two-stage stamping process with the initial design and it fully reveals the unfavorable mechanism which develops inferiorities during forming. In this paper, a new design guideline is proposed to modify the process and tool shapes for a single-stage forming process. With the improved tool design, prototypes are fabricated after several try-out processes. Results of the durability tests show that the design requirement of the part is satisfied and the effective weight reduction is achieved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.121-122
• /
• 2006

In the case of mechanical control systems, it is highly useful to be able to provide a compact model of the mechanical system to control engineers using the smallest number of variables, while still providing an accurate model. The reduced mechanical model can then be inserted into the complete mechanical control system models and used for system-level dynamic simulation. In this paper, a moment-matching based model order reduction (MOR) which reduces the number of degrees of freedom of an original finite element model via the Arnoldi process is considered to study the dynamic responses of a HDD actuator and suspension system.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.149-156
• /
• 1998

In suspension bridges, the axial farces in the wires are transferred by side pressure on the semicircular face, and further from the strand shoe through rods to a base plate fixed to the massive concrete part of the anchor block. For prefabricated strands the most common way of anchoring is by socketing the ends of the strands. In this study, strand shoe and hanger socket are analyzed far various load conditions using Finite Element Method. The finite element models are built using MSC/PATRAN and analysis is carried out using MSC/NASTRAN. Results are again completely processed using MSC/PATRAN. From the results of the analysis, trends of deformation and stress distribution are reviewed and important factors to consider in the design of strand shoe and hanger socket are discussed.

• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.30-37
• /
• 1995

In this research a real time vehicle dynamic simulation software, to be used on real time vehicle simulators, is developed using relative coordinates and suspension super-element concept. Accuracy of the software is verified through comparisons of simulation results with those of a commercial mechanical system dynamic analysis package. It is demonstrated that real time simulation on a workstation with a 15 D.O.F. vehicle model is possible.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.353-356
• /
• 2008

Tool design is carried out for a press forming of a cross member in the rear suspension assembly based on the result of the finite element analysis. The analysis simulates the two-stage stamping process with the initial design and it fully reveals the unfavorable mechanism which develops inferiorities during forming. In this paper, a new design guideline is proposed to modify the process and tool shapes for a single-stage forming process. With the improved tool design, this study fabricates prototypes that satisfy the durability requirement.