• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.1
• /
• pp.100-108
• /
• 1997

Electrostatic precipitator is the equipment that separates dust particles from the gas in which they are suspended. Specially, for the construction of industrial electrostatic precipitator, the corporations would send the layout design to a customer to accept an order. Therefore, it is made a detail drawing after accept ance. Since the layout design of electrostatic precipitator is very complex, it takes time and design errors are included. Thus, for competitiveness in these industries, the development of software for the layout design of electrostatic precipitator is important. In this study, the developed software deals with technical concept and layout design of industrial electrostatic precipitator. By using the software, design time was very short, design errors reduced largely, and the standardization of design could be carried out.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.E2
• /
• pp.77-85
• /
• 2004

In order to investigate the scavenging property of airborne carbonaceous particles by precipitations, rainwater, snow sample, and total suspended particulate matter (TSP) were collected at a heavily industrialized urban site. Elemental carbon (EC) contents of both rainwater and snow water were deter-mined using elemental analysis system. EC concentrations in rain samples varied from 33.6 to 166.6 $\mu\textrm{g}$ L$^{-1}$ with an average 47.2 $\mu\textrm{g}$ L$^{-1}$ . On the other hand, those of snow samples in three times snow events were ranged from 122.4 to 293.3 $\mu\textrm{g}$ L$^{-1}$ . As might be expected, EC showed the significantly high scavenging rate at the initial rainfall. The average total carbon (TC) scavenging rate by washout mechanisms was 57.6% for five rainfall events. The scavenging rate of EC gradually increased in proportion to the increasing rainfall intensity and rainfall amount.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.738-740
• /
• 2003

A method for identifying the released region and time of Asian dust using the long-range inverse transport model that traces the wind field in the backward direction from positions where Asian dust was observed is described. Initial conditions for the inverse transport simulation were obtained from the time variation of the density distribution of the suspended particulate matter (SPM) in the air measured at various places in Japan. Based on a concentration of trajectories of the air mass computed by the inverse transport model, the source region of Asian dust clouds observed at meteorological stations in Japan on March 17 to 18, 2002 was estimated. As a result, it was found that dust particles were released at about 6h on March 15 in the neighborhood of Inner Mongolian Autonomous Region.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.357-361
• /
• 2005

부유사 입자를 난류 흐름 중에 투입하면 유속의 연직 분포를 다소간 변화시키는 것으로 알려져 왔다. 1946년에 Vanoni가 Karman 상수의 감소를 제안한 이후 이것은 상당한 논쟁을 불러 왔다. 본 연구에서는 입자 추적유속계(PTV)를 이용하여 개수로 중의 난류와 유사의 속도를 직접 측정하고, 이 자료를 분석하여 부유사 입자가 개수로 난류의 유속 분포에 어떻게 영향을 미치는 가를 구명하였다. 또한 기존의 연구의 측정 자료들과 그들의 주장을 재검토하였다. 분석 결과 부유사 입자는 Karman 상수를 다소 감소시키는 것으로 나타났다. 이 감소 현상은 물과 유사의 상대적인 속도 분포로 설명할 수 있다. 다만 Karman상수의 감소 정도는 종래의 연구자들이 주장한 것보다 상당히 작다. 이처럼 차이가 나는 이유는 종래의 연구들이 Karman 상수의 산정 방법이나 이용한 자료의 선택에서 문제가 있었기 때문이다. 또한, 난류 중에 투입된 부유사는 마찰 속도에는 그다지 영향을 미치지 않는 것으로 나타났다.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.115-125
• /
• 1992

혼합 대류 이상 유동 시스템에 부유된 슈트와 미분탄과 같은 고흡수, 방사하는 입자의 열확산적 입자이동에 대한 복사 및 부력효과를 수치적으로 검토하였다. 기체 및 입자유동의 지배방정식 들은 Euler 관점의 two-fluid model의 근간에서 수행되었으며, 에너지 보존식의 비선형 복사 생 성항은 P-1 근사방법에 의해 계산되었다. 혼합 대류 유동에서의 입자의 열확산 현상은 복사 열 전달과 커플링되며, 복사효과의 증가는 부력효과를 상대적으로 감소시켜 부력효과에 의한 입자 부착율을 완화시켰다. 복사효과가 무시될 때 Grashof 수의 증가에 따라 입자의 확산효과는 감 소되었으며, 복사효과가 함께 작용될 때 입자 부착율은 증가됨을 보였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.197-204
• /
• 1993

Pipe drainage is one of the effective slope protein works that can be adopted practically. As fine soil particles are suspended in percolating water, the strainer structure of under drain pipes in necessary to prevent the immediate clogging by soil suspension flow. This study deals with the effective strainer structure of under drain pipes for slope protection. The effective strainer structure of under pipes is the funneled strainer in which pore radius is enlarged toward flow direction. It is designed from the rheological properties of soil suspension flow which prevents the immediate clogging. Experimental results showed that the pipe drain discharge through the funneled strainers was larger than that through the constant pore radius strainers. This theorectial and experimental results indicate that the strainer with enlarged pore radius toward flow direction, is more effective than the strainer with constant pore radius.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.433-435
• /
• 1999

대기 중에 존재하는 에어로졸은 물리ㆍ화학적인 반응에 의하여 생성되며 금속, 수용성 성분을 비롯한 탄소입자 등으로 복잡하게 이루어져 있다. 이들은 대기중에서 시정감소와 광산란을 야기시킬 뿐 아니라 인체에 흡입되어 호흡기질환등을 야기 시킨다(Holt,1988). 또한 분진은 입자의 크기가 작을수록 상대적으로 표면적이 증가하여 각종 유해 대기오염물질과 흡착하여 인체에 악영향을 미친다(Simpson, 1992; John et al., 1990).(중략)

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.102-108
• /
• 1999

This study was conducted to evaluate the ventilation to remove gases, vapor and particles of environmental tobacco smoke(ETS) in a closed room. The ventilation rate choosed were 0.445 ㎥/min, 0.528 ㎥/min, and 0.625 ㎥/min. ETS components measured were total suspended particle(TSP), ultraviolet particulate matter(UVPM), fluorescent particulate matter(FPM), solanesol, carbon dioxide($CO_2$), carbon monoxide(CO), nicotine, and 3-ethenylpyri-dine(3-EP). The concentration of ETS components measured rapidly decreased as increasing ventilation rate, but the removal efficiency by ventilation was different from each ETS compounds. The $CO_2$, and CO, gaseous components of ETS, were dominant components to be removed from the room by ventilation. The ventilation with 0.528 ㎥/min for 1 hr was enough to remove over 99% of those gaseous components. Nicotine and 3-EP needed the ventilation for 2 hrs to reduce over 95 % of those components. As the same ventilation rate, 99 % of TSP and solanesol concentration were removed from the room within 2 hrs, UVPM and FPM concentration decreased 90 %.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.171-175
• /
• 2008

In the present study, a numerical simulations are investigated in a stirred solid/liquid system by using Eulerian multi-phase model. The transient flow field of liquid phase and distribution of solid particles are predicted in stirred tanks consisting of 4-pitched paddles impeller and baffles. The effects of number and width of baffles on the mixing time and the quality of solid suspension in a stirred tank are presented numerically. The result shows that the mixing time decreases as the width and number of baffles increase.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.542-550
• /
• 1998

A direct contact heat exchanger using particle-suspended gas as a heat transfer medium is analyzed with an extended emphasis on the radiation, i. e., considering the radiation by both gas and particles. While the Runge-Kutta method is used for a numerical analysis of the momentum and energy equations, the finite volume method is utilized to solve the radiative transfer equation. Present study shows a notable effect by the gas radiation in addition to the particle radiation, especially when changing the chamber length as well as the gas and particle mass flow rate. When the gas and particle mass flow rate is raised, the gas temperature in the particle heater still increases as the gas absorption coefficient increases, which is different from the results for the small scale heat exchanger.