• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.4
• /
• pp.378-389
• /
• 2013

In Korea, studies on the indoor air quality have been conducted since mid of 1980s. The turning point occurred in 2003 by establishing the act of the indoor air quality management for public facilities. According to the law, the basic plan for indoor air quality management is prepared by government every five years, affecting greatly governmental policy and related academia and industries. Indoor air quality survey was mostly carried out among indoor air quality researches. After then, assessment of health effect and air cleaning technology were studied. Although various control technologies for particle, bioaerosol, odor, and hazardous chemicals have been applied to indoor environments, breakthrough technologies are needed to solve real problems facing at the applied environments. In the future, issue of indoor air quality is more interested and both management policy and control technology are key factors in order to realize comfort and healthy indoor environments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.8
• /
• pp.1362-1368
• /
• 2016

This paper proposes the improved transition scheme for a sensorless drive of an interior permanent magnet synchronous motor (IPMSM). In order to operate the IPMSM, the current controller can be used until 300 rpm for the initial operation. After that, the control method of IPMSM is changed to the speed controller for the sensorless control method. At that point, the rotor speed overshoot is generated due to the rapid change of the current reference for the speed controller. The proposed algorithm is able to reduce the overshoot of a rotor speed by compensating the estimated feedforward value to the speed controller. The feedforward value of the current reference is estimated by using a coordinate transformation and is approximated to the current reference after the transition of the control mode. The effectiveness of the proposed scheme is verified by experiments using an IPMSM drive system.

• Journal of Medicine and Life Science
• /
• v.17 no.1
• /
• pp.29-32
• /
• 2020

As respiratory syncytial virus(RSV) is transmitted either via directly contact with an infected case or via indirectly contaminated fomites or skin, the major preventive measures are strict hand hygiene, early detection of transmitted sources, and rapid isolation of RSV patients. Especially early detection of hidden cases is the most critical control measure when an index case was notified in a postpartum center. The Guideline of Korea Centers for Diseases Control and Prevention defines potential contacts in an epidemiologic survey as admitted newborns, parents of index cases, center's workers, and visitors for 10 days before the first diagnosis day of index case. However, it needs to classify potential contacts in more detail in order to conduct a successful survey. Authors conducted to search related literatures and appraise the evidences. Firstly, potential contacts would be classified into RSV-related symptomatic contacts(SxC) and asymptomatic contacts. And then, mother, caring workers, and visitors of the index cases among asymptomatic contacts would be defined as the asymptomatic close contacts(ASCC). Finally, the rest would be defined as the asymptomatic regular contacts(ASRC). The defined test using reverse transcription-PCR is applied to SxC and ASCC, and decision of isolation or regular activities are made according to the results. The rapid antigen detection test kits are applied to ASRC. These suggestions might be helpful to detect hidden cases earlier and prevent a further infection.

• Research in Community and Public Health Nursing
• /
• v.12 no.1
• /
• pp.81-91
• /
• 2001

In order to identify the health promoting behavior and its related factors for high school students, a survey was performed from 4th to 8th of December 2000. Population were selected by stratified random sampling method and total 355 students replied to the self-administered questionnaire survey. Data analysis was done by descriptive statistics, t-test, ANOVA. Pearson's Correlation, stepwise multiple regression. The results were as follows: 1. The average score of health promoting behavior practices was 2.23(SD=.41) points by the 4 point scale, which was lower than that of adults. In the subcategories, the highest degree of performance was self-actualization (mean= 2.68, SD=.68), and the lowest degree was health responsibility (mean = 1.33, SD= .41). 2. According to gender(t=2.70, p=.00), school type(t=2.53, p=.01), father's educational level(F=4.16, p=.00), sleeping hours(F=3.80, p = .02), and number of hours at school (F=4.44, p=.01), there were a statistically significant differences in modifying factors. of health promoting behavior. 3. Health promoting behavior showed significant positive correlations with self- efficacy(r= .461. p= .000), internal health locus of control (r=.284, p=.000), perceived health status (r=.163, p=.002). 4. The combination of self-efficacy, internal health locus of control. school type, and gender explained 30% of the variance of health promoting behavior. Therefore, the findings of research can serve as the basis for developing health promoting programs, which enhance self-efficacy and performed in school and community.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.423-431
• /
• 2008

The control surveying which aims at identifying the coordinate system of satellite images with that of ground is a repeatedly performed essential process to produce digital ortho - photos and it acts as the main factor to increase the production cost of the photos by duplicated budgets and redundant works when executing the projects for acquiring basic geographical information from high density satellite images. During the experimentation, an application system was established for producing a stereo image chip by the analysis of DPPDB file structure, the stereo image chip was produced with SPOT and IKONOS images, the analysis of 3D modeling accuracy was performed to secure the required accuracy and to present the optimal number and deployment of the control points, and a 3D modeling was performed for new SPOT images and lastly, 3D ground coordinates were extracted by the observation of the same points through the overlapping with the new images. As the results of the research, it is proved that the stereo image chip can be used as the ground controls through the accuracy analysis between the coordinates of the images and the ground, close results were obtained between the coordinates by the ground survey and those by the 3D modeling using new images and the observation of the same points, positional changes were not found during observing the same points, and the research presented the methodology for improving the process of the control survey by showing the availability of the image controls on the stereo image chip instead of the ground controls.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.45-51
• /
• 2004

Control stations managed by national and local governmes are associated with other survey work and constructing geography information and they are important assets in the national level as the positional standard of the country. Since these control points are managed as some type of register and the control points could not be easily updated due to the loss of control stations from construction work or urban development. Therefore, the users could not understand the present situation of the changed control stations. In this background, the aim of this study was to develop control station management system which the managers can use to efficiently maintain control points and to support the usage of the survey control points. For developing this system, we have designed input, update, network, analysis and statistic functions, and have constructed the system using Mapobject as main engine with other languages such as Visual C++ and Visual Basic. The graphic data used in this system are 1/5,000 digital map and digital cadastral map, and the attribute data of each control station are point name, map tile name, longitude and latitude coordinates, TM coordinates, surveying data with the format of year-month-day and control situation photos and so on. In the result of constructing this control station management system, we could achieve integrated management of graphic, attribute and positioning information of each control station.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.48-54
• /
• 2020

DMSMS (Diminishing Manufacturing Sources and Material Shortage) is increased by developing the scientific technique and downsizing the military part market. DMSMS affects the increase in total life cycle costs and serviceability. Therefore, advance control for parts is important to reduce the cost, and a database is needed to share information on the DMSMS. A task needs to be performed continuously by setting the major control item to management more efficiently. The purpose of this study was to deduce the major control item for the DMSMS management system. Thus, the pre-control item basis of the DAPA (Defense Acquisition Program Administration) Manual and the SD-22 Manual were first selected, and the results of the survey were analyzed by AHP (Analytic Hierarchy Process) method. Fifteen of the detailed items were stratified into three criteria (Impact, Probability, and cost of the DMSMS), and each weight for the items was calculated using a nine-point scale survey. The AHP survey was executed with 25 specialists in the DMSMS management field, and the score of consistency ratio over 0.1 was excluded. The model explained the results and suggested future directions for development.

• Journal of the Korean Dietetic Association
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2001

It is thought that the sanitary perception and hygienic food treatment of food suppliers as the first handlers of foodstuffs are extremely significant for the safe and sanitary management of food in group meal services. So in this study, a survey of 103 food suppliers who provide raw materials for 80 meal services in business places around Busan area was conducted on general matters, participation in sanitation education, sanitary perception, sanitary treatment of foodstuffs, knowledge of sanitation, etc. The results of the survey are as follows: 1. 42.7% of the subjects have worked for the food supply companies for one to five years and the main job of 36.9% of them is delivery service. Food suppliers who handle over two foodstuffs are 6839%. 2. Concerning the participation in sanitation education, 43.7% of the subjects have not experienced any such education, The reason of 23.3% of them for not having the education is that there have been no opportunity for them at all. And 83.5% of them regard the education on hygiene as necessary. 3. In the sanitary perception, 93.1% of the subjects considered the temperature control of the food delivery vehicles as important and 82.5% of them replied on of the leading causes of food poisoning as foodstuffs. 64.0% thought of their knowledge of food sanitation as not very good, but moderate. 4. Concerning sanitary treatment of foodstuffs, 50.5% of delivery vehicles were wearing sanitary uniforms and 24.3% of them washed their hands while supplying food. 5. In the score of hygienic knowledge, the average score of all food suppliers was 60.6 point. In the score of hygienic knowledge on general matters, managing supervisors got 6.31$\pm$1.70. In the score of hygienic knowledge based on the perception of food sanitation, the food suppliers with the experience of sanitation education scored 6.42$\pm$1.93 point and the point was significant(p<0.01), compared with that of the food suppliers without the experience of sanitation education. The food suppliers who answered their knowledge was very good scored the highest point, 8.00$\pm$1.41. The food suppliers who replied that sanitation education was truly necessary recorded the hygienic knowledge score of 6.75$\pm$1.77, significantly(p<0.01) high. In the score of hygienic knowledge on the basis of the practical degree of sanitary handling of food materials, the food suppliers who answered they cleaned their delivery vehicles everyday scored 6.48$\pm$1.93, the food suppliers who answered they sterilized their delivery vehicles everyday scored 6.29$\pm$1.89, the food suppliers who answered they controlled the temperature of their delivery vehicles irregularly scored 6.58$\pm$1.79 and the food suppliers who answered they washed their hands every time when they were working scored 6.86$\pm$2.24, significantly(p<0.05) high in comparison with every item in other factors. And the food suppliers who answered they were wearing sanitary uniforms irregularly while supplying foodstuffs scored the highest point, 6.66$\pm$2.92.

• Journal of Acupuncture Research
• /
• v.23 no.6
• /
• pp.239-254
• /
• 2006

The 3rd Japan-Korea Workshop on Acupuncture and EBM was held at Kanazawa on June $16^{th}$. From Korea team, 4 papers were presented. Dr. Hahn introduced a new approach of data analysis on series of n-of-1 trials using the Bayesian statistics. It offered important information for the future n-of-1 trials. Dr. Park clearly demonstrated the significance of various sham devices proposed and stressed the importance of research questions when we choose the control intervention in RCT. Dr. Lee reported the results of survey in Korean Medical Doctors (KMD) for their point selection and techniques to the distal and local points. Dr. Kim presented the results of face to face survey on the KMD with 28 items for acupuncture treatment on the knee OA. Finally, a draft of protocol was introduced by Dr. Kim. The title was "multi-center, a randomized, single blinded, two arms, parallel-group study to compare the effectiveness and safety of 'individualized acupuncture' and 'standardized minimal acupuncture' in Korean and Japanese patients with knee osteoarthritis (Phase IV)". From Japan team, 7 speakers presented their comments and proposals on the protocol. Dr. Takahashi introduced several issues regarding n-of-1 trials and pointed out the importance of obtaining generalizability from n-of-1 trials. Dr. Shichidou pointed the importance of research design, selection of outcome measures and reduction of biases. Dr. Itoh presented the results of point selection for the knee OA based on the literature survey. Dr. Sumiya introduced several differences between KMD and Japanese acupuncturists based on the questionnaire used in KMD survey. Dr. Furuya demonstrated a result of press tack needle and its sham device on shoulder stiffness. Dr. Yamashita introduced the results of literature survey regarding adverse events occurred by acupuncture on knee OA. Dr.Tsukayama stressed the importance of responsibility of Institutional Review Board (IRB) for the conduction of clinical trials. After several issues were discussed, the need of continued meeting for final protocol development was agreed, then the workshop was closed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.5
• /
• pp.403-412
• /
• 2018

Recently, GNSS (Global Navigation Satellite System)-derived orthometric height determination has been studied to improve the time and cost-effectiveness of traditional leveling surveying. However, the accuracy of this new survey method was evaluated when unknown points are located lower than control points. In this study, the accuracy of GNSS-derived orthometric height was examined using TPs (Triangulation Points) to verify the stability of surveying in mountainous areas. The GNSS survey data were obtained from Mungyeong, Unbong/Hadong, Uljin, and Jangseong. Three unknown points were surrounded by more than three UCPs (Unified Control Points) or BMs (Benchmarks) following the guideline for applying GNSS-derived orthometric height determination. A newly developed national geoid model, KNGeoid17 (Korean National Geoid 2017), has been applied for determining the orthometric height. In comparison with the official orthometric heights of the TPs, the heights of the unknown points in Mungyeong and Unbong/Hadong differ by more than 20 cm. On the other hand, TPs in Uljin and Jangseong show 15-16 cm of local bias with respect to the official products. Since the precision of official orthometric heights of TPs is known to be about 10 cm, these errors exceed the limit of the precision. Therefore, the official products should be checked to offer more reliable results to surveyors. As an alternative method of verifying accuracy, three different GNSS post-processing software were applied, and the results from each software were compared. The results showed that the differences in the whole test areas did not exceed 5 cm. Therefore, it was concluded that the precision of the GNSS-derived orthometric height was less than 5 cm, even though the unknown points were higher than the control points.