• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.761-767
• /
• 2001

In this paper, filtering techniques to reduce the adverse effects of motor leads on high-frequency PWM inverter fed AC motor drives will be examined. The filter was designed to keep the motor terminal from the cable surge impedance to reduce overvoltage reflections, ringing, and the dv/dt, di/dt. Therefore, filtering techniques are investigated to reduce the motor terminal overvoltage, ringing, and EMI noise in inverter fed ac motor drive systems. The output filter is used to limit the rate of the inverter output voltage and reduce EMI(common mode noise) to the motor. The performance of the output filter is evaluated through simulations (PSIM) and experiment on PWM inverter-fed ac motor drive(3phase, 3hp(2.2kw), input voltage 220/380V, induction motor). An experimental PWM drive system reduction of conducted EMI was implemented on an available TMS320C31 microprocessor control board. Finally, experimental results showed that the inverter output filter reduces more CM noise than the LPF(low pass filter) and reduce overvoltage and ringing at the motor terminal.

• YAKHAK HOEJI
• /
• v.32 no.4
• /
• pp.239-244
• /
• 1988

Transcriptional rate of lactate dehydrogenase A-gene(LDH-A) during the prereplicative phase of regenerating rat liver was determined by in vitro run-off transcription assay. The results show that the transcription rate of LDH A-gene increases between 12 hours and 15 hours peaking at 13 hours after partial hepatectomy of rat liver. The increased rate of LDH A-gene transcription was interfered after DL-propranolol treatment intraperitoneally injected twice at 1 hour and 8 hours after partial hepatectomy indicating that the transcriptional control of LDH A-gene expression may be mediated by beta adrenergic receptor and cAMP as a second messenger. And also was it shown that the temporally increased rate of LDH A-gene transcription was maximum one hour after the second cAMP-surge which is known to play an important role for the initiation of DNA replication during regeneration of rat liver. And the transcriptional rate of LDH A-gene was decreased to the basal level at the time period when the hepatocytes proliferate rapidly suggesting that the induced LDH Aisozyme may be required for the initiation of DNA replication during regeneration of rat liver. These data may be supporting for the hypothesis suggesting that the induced LDH A-isozyme during the pre-replicative phase of regenerating rat liver may play bifunctional roles as a glycolytic enzyme and a helix destablizing protein as well.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.904-911
• /
• 2010

This paper presents the design of acoustic resonance free and over current limit during transient state consideration electronic ballast for 1.5kW Metal-Halide Lamp(MHL) that employs frequency modulation (FM) technique. The proposed ballast consists of a Full-Bridge(FB) rectifier, a passive power factor correction (PFC) circuit, a full-bridge inverter, an ignitor using LC resonance and a control circuit for frequency modulation. The frequency modulation technique is the most effective solution to eliminate acoustic resonance among other technique. It spreads power spectrum of lamp to reduce the supplied power spectrum under the energy level of eigen-value frequency. Moreover, the proposed ballast is simple and cost effective above conventional ballast. A new PFC circuit is proposed which combines with LCD type and PCSR filter. A new PFC circuit has higher PF and lower THD than conventional LCD type and secure high reliability. Finally, to protected switching components in transient state, the surge current into ballast is limited by increase the switching frequency. Performance of the proposed ballast was validated through computer simulation using Pspice, experimentation and by applying it to an electronic ballast for a prototype 1.5kW MHL.

• Journal of the Korean Institute of Navigation
• /
• v.14 no.4
• /
• pp.41-52
• /
• 1990

Due to the constantly varying sea-state with which any wave energy conversion device must contend in order to extract energy efficiently , the ability to control the device's position relative to the incident waves is critical in achieving the creation of a truly functional and economical wave energy device. In this paper, the authors will propose methodology based on the theory of a variable structure system to utilize a three dimensional source distribution as a model to estimate anticipated surge, sway and yaw of a wave energy conversion device relative to varying angles and characteristics of incident waves and there from derive a feedback to a sliding mode controller which would reposition the device so as to maximize its ability to extract energy from waves in constantly varying ocean conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.5
• /
• pp.527-535
• /
• 2009

This paper describes the control system to suppress the load pendulation using tagline for the floating crane. Dynamic equation of motion of the floating crane and the load is derived using Newton's 2nd law and free body model. The floating crane and the load are assumed that they move in center plane. Each rigid body has 3 DOF (surge, heave, pitch), because it moves in two directions and rotates. Then, this system, which is composed of two rigid bodies, has 6 DOF. The gravitational force, the hydrostatic force, the hydrodynamic force and the tension of the wire rope are considered as external forces, which affect to the floating crane. To suppress the pendulation of the load, the tagline, which connects between the load and the float crane, is applied to the system. The tagline is composed of the spring and the wire rope. Proportional and Derivative control is used as a linear control algorithm. The results of the numerical analysis of the 3,600 ton floating crane show that the tagline system is effective to suppress the load pendulation.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.284-297
• /
• 2021

A simple kinematic model for the prediction of ship manoeuvres based on trial data is proposed in this study. The model consists of first order differential equations in surge, sway, and yaw directions which simulate the time series of each velocity component. Actually instead of sea trial data, dynamic model simulations are conducted with randomly varied control inputs such as propeller revolution rates and rudder angles. Based on learning of control inputs and velocity outputs of dynamic model simulations in sufficient time, kinematic model coefficients are optimized so that the kinematic model can be approximately reproduce the velocity outputs of dynamic model simulations with arbitrary control inputs. The resultant kinematic model is verified with new dynamic simulation sets.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.139-145
• /
• 2017

Recently, gusts, typhoon and tsunamis have been occurring more frequently around the world. In such an emergency situation, a moored vessel can be used to predict and analyze other vessel behavior, but if the mooring system is destroyed, marine casualties can occur. Therefore, it is necessary to determine quantitatively whether a vessel should be kept in the harbour or evacuate. In this study, moored ship safety in an exclusive wharf according to swell effects on motion and mooring load have been investigated using numerical simulations. The maximum tension exerted on mooring lines exceeded the Safety Working Load for intervals 12 and 15 seconds. The maximum bollard force also exceeded 35 tons (allowable force) in all evaluation cases. The surge motion criteria result for safe working conditions exceeded 3 meters more than the wave period 12 seconds with a wind speed of 25 knots. As a result, a risk rating matrix (risk category- very high risk, high risk and moderate risk) was developed with reference to major external forces such as wind force, wave height and wave periods to provide criteria for determining the control of capabilities of mooring systems to prevent accidents.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.64-70
• /
• 2007

The electrical accident results from an insulation blackdown by over-voltage, an overheating by the excess of allowable current, a deterioration performance by the passage of time, and so on. This paper discusses how to improve the power control system of PCB in water purifier. The protecting device of present power supply control system in water purifier is composed of the varistor device which acts only for impulse-type surges. So the present system can not be protected others except the surge of impulse-type. The newly-suggested power control system in this paper is designed to protect the system by disconnecting power supply through SSR(Solid State Relay) if the value of input voltage is exceeded the setting value.

• Journal of Biosystems Engineering
• /
• v.12 no.1
• /
• pp.45-52
• /
• 1987

In order to improve the thermal efficiency of an internal combustion engine, various ignition timing control systems were examined and the best one was chosen. The parts used for the systems were a microcomputer system with DAS, 8 bit output port (D-FLIP FLOP), three types of isolation circuit, two types of ignition timing pulse generator, three types of switching circuit and two types of high voltage ignition circuit. Most systems did not operate well due to the effects of electromagnetic waves and surge currents occurring when the ignition began or ended with resulting high voltage. The best ignition timing control system was found to be the combination of (microcomputer system)-(ignition timing pulse generator using step motor position control pick-up)-(switching circuit using TR logic)-(high voltage ignition circuit using CDI).

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.184-192
• /
• 2019

The existing digital signage systems inside the elevators are a lack of tailored contents appropriate to the space and environment inside or outside the elevators. Also, they almost impossible to flexibly respond to various contents disclosure according to the demand of the consumers or the elevator markets. Therefore we design and implement an IoT(Internet of Things)-based smart digital signage system for the safety of elevator passengers.. In order to provide IoT-based information to the smart digital signage within the elevator, we propose an IoT system as a set-top box with gyroscope sensor, acceleration sensor, RFID(Radio-Frequency Identification), fine dust sensor, etc., which processes various data collected by the sensors and provides the elevator passengers with various tailored contents such as elevator driving information, environmental information inside and outside the elevator, and disaster information in addition to simple advertisement information. The proposed IoT system is a set-top box that operates the smart digital signage and has an independent information control processor based on the IoT sensors that do not depend on the elevator control system. For the proposed smart digital signage, it supports an operating system that is independent of the elevator driving service as well as the media service. So the smart signage system has a characteristic that it does not depend on the elevator control system since it is a stand-along IoT-based information control system. With the proposed system providing intuitive content for the surge, steep descent, and radical movements of an elevator due to an emergency situation, the elevator passengers should be able to recognize the situation quickly and respond accordingly. In the near future, the proposed system will expand the market of digital signage applied in conjunction with the development of contents in the disaster, safety and environment fields, and expect expected to revitalize related industries associated with signage.