• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.539-545
• /
• 2004

In this study, the effect of washing, bleaching, and abrasion on tactile and the water absorption properties of the split-type Nylon/Polyester (N/P) microfiber pile-knit was investigated under various enduse conditions. We examined the water absorption and surface properties of PET microfiber which will be very useful in the future. We also studied the variations of their performance during usage caused by friction and repeated washing, regard to all kinds of physical, chemical changes which will appear while using those textiles. Progress in further splitting of PET microfiber fabric is observed with increases in the number of washing and bleaching cycles, and treatment temperature. Initial water absorption (%) was increased with progress in splitting, which provided efficient capillary channel. Surface properties were varied with additional splitting by washing and abrasion. Formation of pilling and splitting by abrasion increase surface roughness, diminishing tactile property, and reduced water absorption property. The current results from this study is expected to provide the appropriate washing management guide to consumers, and to inform end-use performance of product to a producer for improving product quality.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.520-527
• /
• 2016

Phycocyanin (PC) is one of the water-soluble accessory pigments of cyanobacteria species, and its concentration is used to estimate the presence and relative abundance of cyanobacteria. In laboratory experiments, PC content of field data were determined using Sarada's freeze-thaw method in algal bloom season. The effectiveness of three selected extraction methods (repeated freeze-thaw method, homogenization, power control) for PC were determined. The extraction efficiency of phycocyanin was the highest (of the methods compared) when a single freezing-thawing cycle was followed by pre-sonication. Applying this optimized method to surface water of Korean inland waters, the average concentration distribution was estimated at $2.9{\sim}51.9mg/m^3$. It has been shown that the optimized pre-sonication method is suitable to measure cyanobacteria PC content for the characterization of inland waters. The approach and results of this study indicates the potential of effective methods for remote monitoring and management of water quality in turbid inland waters using hyperspectral remote sensing.

• Environmental Engineering Research
• /
• v.15 no.4
• /
• pp.231-237
• /
• 2010

With increased chemical and economic development activities in upstream areas, the amounts of pollutants released have increased, and as such, so has the need for positive management of water supply source areas. Although more than 90% of the water supply sources in Korea depend on direct intake from surface water, the interest in indirect intake, such as riverbank filtration water, has recently risen, with some local governments currently undertaking indirect intake. Even in cases of indirect intake, water supply source protection zones need to be assigned for the comprehensive control of pollutants. To establish water quality protection zones for indirect intake, the scope of the protection zones needed to reflect the hydrological features of the water-bearing deposits of each site. Water source protection areas were estimated and presented as the 1st (within a 100 m radius from an intake well) and 2nd (within a 2 km radius from an intake well) zones. The 1st zone was more sensitive; hence, the installation of various facilities should be prohibited, and the area should be regarded as off-limits. For the 2nd zone, appropriate management should prohibit and restrict activities already present in the water source protection zone.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.1
• /
• pp.117-125
• /
• 2001

Polyacetal resin is usually used to make molds, but it is difficult to achieve dimension accuracy during molding. Therefore it is usually necessary to cut the polyacetal resin after a molding process. Polyacetal resin is easily machining by standard machine tool. Acetal is also a thermal stable material which can be totted without coolant Another concern about the use of polyacetal resin is that it absorbs water easily, which also results in problems with dimension accuracy Therefore, in this study, the cutting resistance of water-absorbed polyacetal resin and its surface roughness after cutting in order to achieve the highest degree of accuracy in the cutting of polyacetal resin were investigated. Also, The Robust Design method uses a mathematical tool called orthogonal arrays to study a large number of decision variables with a small number of experiments. It also uses a new measure of quality, called signal-to-noise (S/N) ratio, to predict the quality from the customer's perspective. Thus, we have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• Journal of Environmental Impact Assessment
• /
• v.12 no.5
• /
• pp.341-348
• /
• 2003

Seasonal characteristics of water quality and effect of the freshwater discharge during open the tide embankment in Haechang Bay were evaluated. In the freshwater, where interior of the tide embankment, COD and Chl-a exceeded about 4mg/L and $10mg/m^3$, respectively, independent of season, while in the seawater they showed high values in April and July in contrast to the other period due to input of freshwater and increase of phytoplankton, respectively. The content of seawater inorganic nitrogen maintained a relatively high level at inner part of the bay, whereas high values of inorganic phosphorus content was distributed at all over the bay. The limiting factor for algal growth was nitrogen with respect to the N/P ratio. The compass of influence by the freshwater discharge in April was quite different with water pollutants. As a result of the salinity variation with time, the freshwater extended strongly to offshore from the surface layer without mixing with depth when open the tide embankment, and reached within about one hour at a station which is 3.5km from the tide embankment. To effective water quality management of Haechang Bay, discharge rate and pollutant loads should be controlled.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.167-179
• /
• 2016

Water quality of Oseepchun, Dogye area, was investigated quantitatively for its origin and hydrogeochemistry in relation to the influence of groundwater. Groundwater appears to be the principal source of Oseepchun from the water-quality monitoring data including redox potentials, composition of dissolved ions and their correlations, hydrogen and oxygen stable isotopic ratios, and the distribution and occurrence of contaminants. Water-quality type of the surface water was grouped by the water-rock interactions as $Ca-HCO_3$ type originated from carbonated bed-rocks in the Joseon Supergroup, (Ca, Mg)-$SO_4$ type related with dissolution of surfide minerals in coal beds of Pyeongan Supergroup, and (Ca, Mg)-($HCO_3$, $SO_4$) type of the mixed one. Locally water pollution occurs by high $SO_4$ from mine drainage and $NO_3$ from waste-treatment facility. Intensive precipitation in summer has no effect on the water type of Oseepchun, but increases the inflow of nitrate and chloride originated from land surface. Results of this study direct that groundwater-surface water interaction is intimate, and thus surface-water resource management should begin with groundwater characterization.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1205-1215
• /
• 2002

To evaluate the change for water quality after the water gate operation in Shiwha lake, in situ survey were conducted on september in 2000 and January, march, jane in 2001. Chemical characteristics and eutrophication level was estimated from the survey data. The water quality of the Shihwa lake was greatly affected by pollutant load from rainfall, and formation of stratification in summer and winter was increased to effect on nutrient release from sediment. Especially, high concentration of chlorophyll-a was occurred in autumn, due to increased nutrient, high water temperature and low salinity after rainfall runoff. The mean concentration of DIN, DIP were 0.346mg/L, 0.0217mg/L in surface water and 0.826mg/L, 0.0415mg/L in bottom water, respectively, which were over III grade of seawater standard. Also high percentage of ammonia nitrogen to DIN in bottom water for autumn and winter was affected by released nutrient from sediment. Correlation analysis of chlorophyll-a versus TSS was shown that organic matter was affected by autochthonous organic matter stem from the algae, these factor showed reverse correlation about salinity. Closely correlations among to the water quality constituent in continuity survey was appeared. The results of eutrophication index estimation showed the high potentiality of red tide occurrence in Shiwha lake, particularity in summer or fall. Overall water quality was greatly improve to compared with measuring data during 1997~1998 at the beginning water gate operation, which reported by KORDI. Therefore, to improve of water quality in Shiwha lake, we need to establish of management plan about nutrient release from sediment, rainfall runoff, maximum of seawater exchange.

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.424-430
• /
• 2006

Since 1985, the Gangwon Institute of Health and Environment(GIHE) and Ministry of Environment have collected rivers and streams water quality data in an ambient surface water monitering program. This study was prepared to propose an achievement of water quality of rivers subject to management by area according to an created level while establishing a water quality level applicable to the Gangwon area. As a result of evaluating correlativity on the BOD-based water quality data, BOD versus TP, and TP versus SS demonstrated significance at a confidence level of 95%. Evaluating correlativity on $10{\sim}90$ percentile values of analyzed data, a coefficient of determination, $r^{2}$ of BOD versus TP, and TP versus SS were 0.625, 0.286 respectively. Grading the results by evaluation method, the representative values of TP were 0.030 mg/l for I level, 0.100 mg/l for II level, 0.200 mg/l for Ill level, 0.300 mg/l for IV level, and 0.350 mg/l for V level, and those of SS were indicated 4.0 mg/l for I level, 15.0 mg/l for II level, 30.0 mg/l for III level, 45.0 mg/l for IV level, and 60.0 mg/l for V level. As for the limiting factor allowing the water quality standard exceeded, BOD posted 61% as the factor was found in 11 places, TP 28%, and SS 33%.

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.363-374
• /
• 2018

The Han River serves as an important water resource for the city of Seoul, Korea and in the neighboring metropolitan areas. From the Paldang dam to the Jamsil submerged weir, the 4 water intake stations that are located for the Seoul metropolitan population were under review in this study. Therefore the water quality management in this section is very important to monitor, analyze and review to rule out any safety concerns. In this study, a 3-D hydrodynamic model, EFDC (Environmental Fluid Dynamics Code), was applied to the downstream of the Paldang Dam in the Han River, which is about 23 km in length, to determine issues related to water resource management. The 3-D grid was composed of 2,168 horizontal grids and three vertical layers. In this case, the hydrodynamic model was calibrated and verified with an observed average daily water surface elevation, water temperature and flow rate data for 3 years (2013~2015). The developed EFDC model proved to reproduce the hydrodynamics of the Han River well. The composition ratios of the noted incoming flows at the monitored intake stations for 3 years and their flow patterns in the river were analyzed using the validated model. It was found that the flow of the Wangsuk Stream depended on the Paldnag dam discharge, and it was noted that the composition ratios of the stream at the intake stations changed accordingly. In a word, the Wangsuk Stream moved mainly along the right bank of the Han River under the condition of a normal dam flow. As can be seen, when the dam discharge rate was low, the incidence of lateral mixing was often seen. The scenario analyses were also conducted to predict the transport of conservative pollutants as in the case of a chemical spill accident. Generally speaking, when scenarios were applied, the arrival time and concentration of pollutants at each intake station was thus predicted.

• Structural Engineering and Mechanics
• /
• v.85 no.4
• /
• pp.461-468
• /
• 2023

Edible coatings are one of the most innovative methods to preserve the quality and increase the shelf life of fresh fruits and vegetables. A successful edible coating should have a barrier against gases, especially oxygen and water vapor, and have good surface characteristics. Today, chitosan coating is widely used due to its properties, such as non-toxic, biodegradable, and biocompatibility. Is. Coating the surface of fruits and vegetables with chitosan increases shelf life due to reducing weight loss and reducing respiration rate and also reduces decay due to its antimicrobial and anti-fungal effect. This work discusses the effect of using chitosan coating containing chamomile extract to increase fresh vegetables'shelf life. In addition to increasing the shelf life of vegetables, this method can be used as a solution for the economic management of human resources. The results of this method confirm the successful synthesis of these nanoparticles, and the results of applying this food coating on vegetables have been successful. They have increased the shelf life of vegetables such as basil and spinach.