• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.43-57
• /
• 1999

The fluid flow and heat transfer in a thin liquid film are investigated numerically. The flow Is assumed to be two-dimensional laminar and surface tension is considered. The most important characteristics of this flow is the existence of a hydraulic jump through which the flow undergoes very sharp and discontinuous change. Arbitrary Lagrangian-Eulerian(ALE) method is used to describe moving free boundary and a modified SIMPLE algorithm based on streamline upwind Petrov-Galerkin(SUPG) finite element method is used for time marching iterative solution. The numerical results obtained by solving unsteady full Navier-Stokes equations are presented for planar and radial flows subject to constant wall temperature or constant wall heat flux, and compared with available experimental data. It Is discussed systematically how the inlet Reynolds and Froude numbers and surface tension affect the formation of a hydraulic jump. In particular, the effect of temperature dependent fluid properties is also discussed.

• 한국의류학회지
• /
• 제27권9_10호
• /
• pp.1153-1159
• /
• 2003

The effects of changing aqueous solution properties by nonionic surfactants on wetting behavior and water retention properies of hydrophobic PET (polyethylene terephthalate) fabric were reported. The aqueous solution properties were diversified by mixing and diluting two nonionic surfactants, i.e., sorbitan monolaurate (Span 20) and polyoxyethylene(20) sorbitan monolaurate (Tween 20). The surface wetting properties ($cos{\theta}$) of PET fabric were greatly improved by adding $10^{-1}g/dl$ Tween 20 and further improved by mixing Span 20 to the system. The water retention properties (W) of PET fabric were also greatly increased by addition of $10^{-1}g/dl$ Tween 20. In diluted surfactant systems, the $cos{\theta}'s$ were increased with decreasing surface tension of aqueous liquids. The ratios of aqueous liquid retained in the pore structure to liquid retention capacity (W/H) were also increased with decreasing surface tension, however, W/H values were dramatically increased right after critical micelle concentration (cmc). The existence of micelles was important for the retention of aqueous liquids in the fabric. The critical surface tension of PET fabric used was found to be 28.7dyne/cm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.6-8
• /
• 2001

This report describes the effect of the blending of poly(trifluoropropylmethylvinylsiloxane) (PTFPMVS) with poly(dimethylsiloxane) (PDMS) on the surface properties such as water repellency using dynamic contact angle (DCA) measurement. We have investigated the surface molecular mobility of the PDMS/PTFPMVS blends via a DCA measurement and an adhesion tension relaxation. It could be shown that a flexible side-chain segment in PTFPMVS having higher surface energy, could be reoriented easily in water to decrease the interfacial tension of the polymer/water interface, which seems to play a major role at the decrease of the receding contact angle and the surface resistivity of PDMS/PTFPMVS blends.

• 설비공학논문집
• /
• 제15권11호
• /
• pp.964-969
• /
• 2003

The objective of this study is to investigate the effect of surfactant on the onset of Marangoni convection adapting a non-linear surface equation of state. The surface tension gradient with respect to the absorbate concentration, ${\gamma}$, is linearly related to the surface concentration of a surfactant with a coeffcient $x_{A}$. The numerical results show that the role of the initial surfactant concentration to Marangoni instability changes from the stabilizer to the destabilizer depending on the change of the sign of $x_{A}$ from negative to positive. It is concluded that for $x_{A}$>0 there is a critical modified Marangoni number of surfactant $M_{Ac}$ $^{*}$ above which liquid layer is always unstable against long wave disturbances.rbances.

• 한국산학기술학회논문지
• /
• 제17권6호
• /
• pp.39-44
• /
• 2016

최근의 이상기후로 인하여 수공구조물의 안전성이 재고되고 있으며, 이에 따라 수공구조물의 붕괴에 대한 연구가 증가하고 있다. 특히 제방 등 수공구조물의 월류로 인한 붕괴로 발생하는 홍수파 선단의 초기 이동속도는 제내지의 위험성을 예측하고, EAP(Emergency Action Plan) 등을 수립하는 기초자료가 된다. 이러한 선단홍수파의 정확한 예측을 위해 수리실험이 다수 수행되고 있으나, 많은 연구에서 초기의 홍수파 선단에서 발생하는 표면장력에 의한 축척효과(Scale effect)를 고려하지 않고 있는 실정이다. 이에 본 연구에서는 계면활성제(surfactant)와 영상 분석 장비를 이용한 표면장력 도출 수리실험 및 급 개폐가 가능한 수조를 이용한 홍수파 전파 실험을 통하여, 계면활성제 농도와 표면장력 관계, 표면장력과 홍수파 전파속도 관계, 표면장력과 Weber Number 관계를 도출하여, 초기 홍수파 선단에서 발생하는 표면장력에 의한 축척효과 보정계수 및 축척효과를 받지 않는 한계조건(critical condition)을 제시하였다. 연구결과 Weber Number가 약 12.2 이하일 경우 보정 계수가 필요한 것으로 나타났으며, 그 이상인 경우 축척효과를 무시할 수 있는 것으로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.83-88
• /
• 2004

Micro wires manufactured by the straightening progress are widely used in bio-medical and semi-conductor fields. In this study, we have developed a novel straightener which uses the direct heating method for straightening. In order to avoid the surface oxidization, during the heating process, we supplied the inert gas(Ar) and examined the effect of the gas flow rate. The effect of the tension and the current applied to the tungsten micro wires were thoroughly studied. From various experiments, it was found that when the tension is $500{\sim}600gf$ and the current is about 1.5A, we obtained higher straightness(${\approx}1{\mu}m/1000{\mu}m$) and roundness ($<{\pm}2{\mu}m/100{\mu}m$).

• 대한전기학회논문지
• /
• 제37권1호
• /
• pp.55-62
• /
• 1988

The variation of electrical resistivity of silver particle-filled polymers with the volume percent of silver particles was investigated. Also, the relationships between the surface tension of polymer and dispersion effect of silver particles were studied to find the steep drop of electrical resisivity, in view of agglomerate morphology. The critical volume precent of silver particles varied depending on the polymer species and increased with the increasing surface tension of polymer. The steep variation of resistivity with the increasing temperature was explained with the expansion of polymer at the melting temperature of polymer. The conductive break down current increased with the increasing volume percent of silver particles in the Ag/LDPE system and that was attributed to heat of Joule taken througn the contact area between the silver particle.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.47-54
• /
• 2023

본 연구에서는 GFRP, BFRP와 CFRP 보강근으로 보강된 콘크리트 시험체의 인장 거동 특성을 실험적으로 분석하였다. FRP 보강근의 인장강도는 설계강도와 유사하게 나타났으나, 탄성계수는 다소 낮게 측정되었다. 또한 인장강화 시험체는 OPC와 SFRC를 사용하여 150(W)×150(B)×1000(H) mm의 크기로 제작하였다. 균열간격은 탄성계수가 낮고 표면이 보다 매끄러운 GFRP 보강근이 가장 크게 나타났으며, 표면이 다소 거친 BFRP와 탄성계수가 높은 CFRP 보강근의 균열간격은 비슷하게 분석되었다. 하중-변형률관계에서도 GFRP보강근은 균열후 다소 급격한 거동을 보인것에 반하여 BFRP와 CFRP 보강근은 균열발생시 다소 안정적인 거동후 일정수준은 인장강화 효과를 유지하였다. 인장강화지수의 경우 직경이 증가할수록 인장강화지수는 다소 작게 분석되었으며, BFRP보다 GFRP의 경우가 인장강화지수는 높게 분석되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.323-326
• /
• 2005

Uniaxial tension test of Glass Fiber Reinforced Polymer (GFRP) bar reinforced concrete prisms was performed. The objective was to investigate the adequate cover thickness of the GFRP rebars. The tension stiffening effect of GFRP bar reinforced concrete was also studied. The test variables included rebar types (conventional steel rebar and two different GFRP rebars) and cover thicknesses (five different cover thicknesses ranging between 1-3db). Normal strength concrete was used. Cracking patterns on concrete surface and cracking loads were careful1y observed during the direct tensile test. The test results indicated that the adequate cover thickness of the GFRP rebars may even be larger than that of the steel rebars and that the cover thickness of 2db commonly specified for the GFRP rebars may not be large enough. The tension stiffening effect of the GFRP rebars was also quantified and documented from the test results.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.241-250
• /
• 2000

In this study, condensation heat transfer tests were conducted in flat aluminum multi-channel tubes using R-22. Two internal geometries were tested ; one with smooth inner surface and the other with micro-fins. Data are presented for the followin~ range of variables ; vapor quality($0.1{\sim}0.9$), mass flux($200{\sim}600kg/m^2s$) and heat flux($5{\sim}15kW/m^2$). The micro-fin tube showed higher heat transfer coefficients compared with those of the smooth tube. The difference increased as the vapor quality increased. Surface tension force acting on the micro-fin surface at the high vapor quality is believed to be responsible. Different from the trends of the smooth tube, where the heat transfer coefficient increased as the mass flux increased, the heat transfer coefficient of the micro-fin tube was independent of the mass flux at high vapor quality, which implies that the surface tension effect on the fin overwhelms the vapor shear effect at the high vapor quality. Present data(except those at low mass flux and high quality) were well correlated by equivalent Reynolds number, Existing correlations overpredicted the present data at high mass flux.