• Title/Summary/Keyword: Surface strain

Search Result 1,797, Processing Time 0.027 seconds

Effect of Plastic Strain on the Surface Integrity of Steel (금속의 Surface Integrity에 미치는 소성스트레인의 영향)

  • Kim, Tae-Young
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.6 no.4
    • /
    • pp.94-102
    • /
    • 1989
  • The effect of plastic strain on the surface integrity of mild steel (SS 41) was studied. This paper shows that the recrystallization technique is adequate to evaluate the plastic strain in a machined surface experimentally. The relations between the plastic strain and the machining conditions are quantitatively evaluated by using the recrystallization technique. The obtained results are summarized as follows. 1. The surface integrity of steel is considerably influenced by the amount of surface region deformation produced by changes in cutting conditions. 2. The plastic strain in machined surface produced by changes of the cutting conditions is evaluated by the recyrstallization technique. 3. The plastic strain increases with the increase of depth of cut and the decrease of rake angle. 4. When the cutting force is high and the rake angle is small, the value of maximum true strain reaches to high. 5. The maximum true strain is related to the cutting energy, and the values increase with the increase of the unit shear and total engergy in constant depth with the increase of the energy values.

  • PDF

A Study on Plastic Strain Distribution of Machined Surface (기계가공면의 소성스트레인 분포에 관한 연구)

  • ;飯野 豊
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.9 no.6
    • /
    • pp.111-117
    • /
    • 2000
  • The plastically deformed layer in a machined surface must be considered in precision machining process. Therefore the analysis of the machined surface, including the plastic deformation and strain distribution should be carried out quantitatively. The subsequent recrystallization technique was presented for analysis of the plastically deformed layer in the machined surface, and the technique was successfully applied to determine the plastic strain in the machined surface. This investigation is to evaluate the plastic strain in the distance 0.1mm from the machined surface, and in particular, to find the effect of shear angle, shear strain, cutting energy etc. on the plastic strain.

  • PDF

A Study on the Measurement of Surface Strain Using the Image Processing Technique (화상처리법을 이용한 곡면변형률 측정에 관한 연구)

  • 김영수;김형종
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 1997.03a
    • /
    • pp.213-216
    • /
    • 1997
  • The measurement of 3D surface strain using the image processing method is another approach for strain measurement. The advantage of this method is that strains at several points included in a captured image can be obtained automatically from only one process. In this study, the whole process of automated surface strain measurement is presented. The strain distribution on a LDH specimen is illustrated as a result of the trial to develope an automated strain measurement system.

  • PDF

An asymptotic multi-scale approach for beams via strain gradient elasticity: surface effects

  • Kim, Jun-Sik
    • Multiscale and Multiphysics Mechanics
    • /
    • v.1 no.1
    • /
    • pp.15-33
    • /
    • 2016
  • In this paper, an asymptotic method is employed to formulate nano- or micro-beams based on strain gradient elasticity. Although a basic theory for the strain gradient elasticity has been well established in literature, a systematic approach is relatively rare because of its complexity and ambiguity of higher-order elasticity coefficients. In order to systematically identify the strain gradient effect, an asymptotic approach is adopted by introducing the small parameter which represents the beam geometric slenderness and/or the internal atomistic characteristic. The approach allows us to systematically split the two-dimensional strain gradient elasticity into the microscopic one-dimensional through-the-thickness analysis and the macroscopic one-dimensional beam analysis. The first-order beam problem turns out to be different from the classical elasticity in terms of the bending stiffness, which comes from the through-the-thickness strain gradient effect. This subsequently affects the second-order transverse shear stress in which the surface shear stress exists. It is demonstrated that a careful derivation of a first strain gradient elasticity embraces "Gurtin-Murdoch traction" as the surface effect of a one-dimensional Euler-Bernoulli-like beam model.

Surface Strain Effects on the Adsorption of Au Adatoms on MgO(001) Surfaces with Surface O Vacancies

  • Jeon, Junjin;Park, Jinwoo;Yu, Byung Deok
    • Journal of the Korean Physical Society
    • /
    • v.73 no.9
    • /
    • pp.1324-1328
    • /
    • 2018
  • By employing ab-initio total-energy and electronic-structure calculations based on the density-functional theory, we studied the effects of surface strain ${\varepsilon}_s$ on the adsorption properties of a Au adatom on defective MgO(001) surfaces with surface oxygen vacancies ($F_s$ centers). The formation energy of the $F_s$ center on MgO(001) varied very slightly in the region of ${\varepsilon}_s$ from -6% to -4% and monotonically decreased with the increase in ${\varepsilon}_s$, from -4% to +6%. As ${\varepsilon}_s$ increased, the adsorption energy ($E^{Fs}_{ads}$) of Au on the $F_s$ center of strained MgO(001) monotonically decreased and, in particular, showed a much larger decrease in $E^{Fs}_{ads}$ for a tensile surface strain of ${\varepsilon}_s$ > +4%. The surface strain dependence on the physical properties, such as the charge states, the spatial charge rearrangement, for Au on the $F_s$ center of strained MgO(001) surfaces was also analyzed. These results provide important physical information on the effects of surface strain on the adsorption of Au on MgO(001) surfaces with $F_s$ centers.

Strain Analysis in GFRP Cross-Ply Laminates Using TR-EFPI Optical Fiber Sensor (광섬유 TR-EFPI 센서를 이용한 GFRP 직교 적층판의 변형률 해석)

  • 우성충;최낙삼;권일범
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 2003.10a
    • /
    • pp.150-153
    • /
    • 2003
  • Longitudinal strains({$varepsilon}_x$) of the core and skin layers in glass fiber reinforced plastic(GFRP) cross-ply composite laminates have been studied using the embedded optical fiber sensor of totally-reflected extrinsic Fabry-Perot interferometer(TR-EFPI). Foil-type strain gauges bonded on both the upper and lower surfaces were used for the measurement of the surface strains. Both TR-EFPI sensor and strain gauge bonded on the specimen surface showed excellent agreement within -0.0086 ~ +0.0302% strain. It was shown that values of {$varepsilon}_x$ in the interior of the surface layer and the core layer measured by embedded TR-EFPI sensor was significantly higher than that of the specimen surface measured by strain gauges. The experimental results were ascertained with finite element analysis. Embedded TR-EFPI optical fiber sensor could measure accurately the internal strains which were different from the surface.

  • PDF

A study on the Plastic Deformation of Surface in Lathe Turning by Grid Method (Grid법에 의한 선삭 가공면의 변형에 관한 연구)

  • Cha, Il-Nam
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.3 no.4
    • /
    • pp.43-52
    • /
    • 1986
  • Experimental results on plastic strain induced in truning operation are presented in this paper. The plastic strain is computed by lagrangian strain using grid method, and metal cutting phenomena are also illustrated by micrograph and distribution figures of plastic strain and microvickers hardness of the machining surface. In the cutting of ductile materials, such as carbon steel, generally, the plastic strain is found to be concentrated near the surface. The amount of plastic strain increases with increasing cutting speed and feed rate. The dustribution of microvickers hardness is greater near the cutting surface and decreases from the machining surface under which its hardness returns to the normal hardness of the material.

  • PDF

Evaluation on the Properties of Strain Distribution of the sopt welding specimen under tensile-shear load (인장-전단하중을 받는 점 용접재의 변형률 분포 특성 평가)

  • 김덕중
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.8 no.6
    • /
    • pp.113-118
    • /
    • 1999
  • In order to evaluate strength of spot welded joint, at first it is importent that we should know strain distribution near nugget zone. During loading, in HAZ, compressive strain increase with Increase of load, but in nugget zone tensile strain increase. During unloading, on the other hand, even through the decreases, the strain variation is not almost appeared in nugget zone and HAZ. In nugget boundary zone, the strain range increases continuously along with load increase on outer surface, but the strain increases continunously and decreases rapidly beyond yield strength on inner surface. In this paper, strain distribution are measured in inner and outer surface with variation of thickness and load under tensile-shear load. Tensile-shear strength increased as with increase of specimen thickness. As for thickness increase rates are 25%, 50%, 100%, and 150%, tensile-shear strength in crease rates are 40%, 81%, 130% and 228%.

  • PDF

Prediction of Radial Direction Strain in Drawn Wire (인발 선재의 반경 방향 변형률 분포 예측)

  • Lee, Sang-Kon;Hwang, Sun-Kwang;Cho, Yong-Jae
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.18 no.9
    • /
    • pp.100-105
    • /
    • 2019
  • In wire drawing, aterial deformation is concentrated on the surface of the drawn wire because of surface contact with the drawing die. Therefore, strain varies from the center to the surface of the drawn wire. In this study, based on the upper bound method, an effective strain prediction method from the center to the surface of a drawn wire was proposed. Using the proposed method, the effective strain of the drawn wire was calculated verify the proposed prediction method, the predicted effective strain was compared with the result of finite element analysis.

A Study on Plastic Strain in Machined Surface (기계 가공면의 소성스트레인에 관한 연구)

  • Kim, Tae-Young;So, Youl-Young;Shin, Hyung-Gon
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.10 no.3
    • /
    • pp.47-56
    • /
    • 1993
  • Typical plastic strains in the machined surface are very difficult to measure, since they are located within a very short distance from the surface and they change very rapidly. There is an alternative way to determine the residual strain in plastically deformed materials by measuring the grain size after a subsequent recrystallization precess. Although, this technique has been successfully applied by several researchers to find the plastic zone around notches and cracks in various materials and welding beads, few works have been reported using the recrystallization method to determine the residual strains in machined surface. Therefore, the purpose of this investigation is to explore the effectiveness of the recrystallization technique in machining applications and in particular, to find the effect of cutting parameters, i.e., depth of cut, rake angle, on the plastic strains. As the result, the recrystallization technique was succesfully applid to determine the plastic strain in machined surface.

  • PDF