• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.65-81
• /
• 2003

During the last few decades in Korea, the development of hillside or mountain areas has rapidly increased for infrastructure construction such as railroads, highways and housing. Many landslides have occurred during these constructions. Also, the amount and scale of damage caused by landslides have increased every year. In the case of Far East Asia including Korea, the damage of landslides is consequently reported during the wet season. In this paper, the effect of stabilizing piles on slope stability is checked and the behavior of slope soil and piles are observed throughout the year by field measurements in the large-scale cut slopes. In particular a large-scale cut slope situated on the construction site for the express highway in Donghae, Korea. First of all, The behavior of the slope soil was measured by inclinometers during slope modification. Landslides occurred in this area due to the soil cutting for slope modification. The horizontal deformations of slope soil gradually increased and rapidly decreased at depth of sliding surface indicating that the depth of sliding surface below the ground surface can be predicted. On the basis of being able to predict the depth of the sliding surface, stabilizing piles were designed and constructed in this slope. To ensure the stability of the reinforced slope using stabilizing piles, an instrumentation system was installed. The maximum deflection of piles is measured at the pile head and it is noted that the piles deform like deflection on a cantilever beam. The maximum bending stress of piles is measured at the soil layer. The pile above the soil layer is subjected to lateral earth pressure due to driving force of the slope, while pile below soil layer is subjected to subgrade reaction against pile deflection. As a result of research, the effect and applicability of stabilizing piles in large-scale cut slopes could be confirmed sufficiently.

• 대한물리치료과학회지
• /
• 제17권1_2호
• /
• pp.23-32
• /
• 2010

Purpose: The purpose of this study was to investigate trunk and gluteal muscle activation during one-leg standing or two-leg standing with lumbar stabilizing taping using non-elastic tape. Method: The subjects of this study were twenty subjects(man=11, women=9) who be in good physical health and have not problem to back muscle and one leg standing. The surface electromyographic(EMG) data were recorded on external oblique(EO), gluteus medius(GMed), gluteus maximus(GMax), quadratus lumborum(QL) while pre- and post-lumbar stabilizing taping in two-leg standing and one-leg standing. The analysis of data was performed using the paired samples t-test to compare the difference of EMG activity of pre and post lumbar stabilizing taping. Result: Contrast of pre-lumbar stabilizing taping the muscle activity of QL in post-lumbar stabilizing taping is significant decrease on two-leg standing posture(p<.05), and the muscle activity of GMed is significant increase on one-leg standing posture(p<.05). Thus, we suggest that lumbar stabilizing taping using by functional tape will be able to affect on lumbar stability and gluteal muscle retraining.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.102-109
• /
• 1997

The surface deformation of shadow mask was studied by the experiments and numerical analysis for process improvement and delet of the stabilizing process in the shadow mask manufaturing line. To inverigate the thermal deformation of shadow mask with and without stabilizing process mask, data of spring strength, frame flatness, frame magnetic force and a mask surface curvature were measured. The tube characteristics of two kind of shadow masks were also investigated.

• 지질공학
• /
• 제19권2호
• /
• pp.191-203
• /
• 2009

본 연구에서는 대규모 절개사면에서 억지말뚝의 효과를 확인하고, 사면과 억지말뚝의 거동을 조사하였다. 먼저, 사면의 절토공사시 경사계를 이용하여 사면지반의 거동을 조사하였다. 계측결과 사면지반의 수평변위는 점차적으로 증가하고, 사면활동면의 발생위치에서 급격히 감소하는 것으로 나타났다. 이를 통하여 사면활동깊이의 예측이 가능하였다. 사면활동면의 예측을 통하여 억지말뚝의 설계와 시공이 수행되었다. 그리고 억지말뚝으로 보강된 절개사면에 대하여 각종 계측시스템을 적용하여 억지말뚝의 거동을 조사하였다. 계측결과 억지말뚝의 수평변위는 켄틸레버보의 변형형상과 유사하게 발생되었으며, 말뚝두부의 철근콘크리트보의 설치로 인하여 두부의 수평변위 억제효과를 확인할 수 있다. 억지말뚝의 최대휨응력이 발생되는 깊이는 대상지반의 상부토사층이 존재하는 깊이와 유사한 것으로 나타났다. 또한, 쏘일네일링 시공을 위한 억지말뚝 전면부 사면굴착시 억지말뚝의 수평변위가 증가함을 알 수 있다. 본 연구를 통하여 대규모 절개사면에 대하여 억지말뚝의 적용성 및 효과를 확인할 수 있다.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.397-406
• /
• 2003

사면 내에 설치된 억지말뚝의 보강효과를 평가하고, 사면의 가상 파괴면을 예측하기 위하여 지속적인 계측관리를 통한 사면의 거동을 감지할 필요가 있다. 본 연구는 계측기를 통한 계측자료가 사면과 억지말뚝의 안정성 및 보강효과를 평가할 수 있는 자료로 활용될 수 있도록 하기 위한 것으로, 현장에 설치된 억지말뚝에 광섬유 센서(FBG 센서), V/W 및 경사계를 설치하여, 사면 내 억지말뚝의 거동분석을 하였다. 또한 각 계측기의 데이터를 비교 분석함으로써, 광섬유 센서와 같은 스마트 계측기술을 실제 토목 구조물에 활용할 수 있는 방안을 현장시험을 통해 검증하고자 한다. 이를 위해 각 계측기에서 구하여진, 연구 대상사면의 거동과 억지말뚝의 보강효과 및 변형률 분포의 상관관계를 비교 분석하였다. 그 결과, FBG 센서와 V/W 센서 및 경사계의 계측결과가 잘 일치하며, 억지말뚝에 의한 사면의 보강효과가 충분함을 알 수 있었다.

• 한국표면공학회지
• /
• 제25권4호
• /
• pp.173-180
• /
• 1992

The effects of the stabilizing additives such as NaCN, 2-MBT and Thiourea on bath decom-position, plating rate and surface morphology have been studied. Bath stability was increased in the order of an additive-free bath, and NaCN-, 2-MBT-, and Thiourea-stabilized baths. The sta-bilizing effects may be attributed to the stability of Cu(II) -complexes. The plating rate is the re-verse order of the bath stability. Accelerative effect of 2-MBT in proper quantity(0.3mg/$\ell$) may be explained by visualizing it absorbed through benzene ring or sulfur atom on portions of the sub-strates. The strong bond of the complexing part of the molecule to nearby chelated copper ions would tend to accelerate plating by making it easier for the Cu2+ -ligand bond to be broken. Sur-face morphologies of copper deposits depend on the bath additives. Electroless copper deposits from the 2-MBT stabilized baths are finer than the deposits from the NaCN- and Thiourea- stabi-lized baths due to the strong adsorption on the substrates.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.327-328
• /
• 2021

In the manufacturing process of ready-mixed concrete, quantity management directly affects the workability and strength of concrete. Therefore, water quantity is the most important management factor for water quality control of ready-mixed concrete. It can be said that the number of unit water in the mix design, the water quantity due to the surface water contained in the aggregate used, and the water quantity taking into account the concentration of sludge contained in the recycling water when using the recycling water are factors that affect the quantity management of ready-mixed concrete. In this study, as a stable quality control method of ready-mixed concrete, a quantity management method by aggregate surface water and a sludge concentration management method according to the use of recycling water were proposed. Thus, we tried to suggest an efficient quantity management method for stabilizing the quality of ready-mixed concrete.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1392-1399
• /
• 2001

The flow fields inside a molten Zn pot of continuous hot-chip galvanizing process were investigated experimentally. With varying several parameters including the strip speed Vs, flow rate Q of induction heater. scrapper location and baffle configuration, instantaneous velocity fields were measured using a PIV velocity field measurement technique. Inside the strip region, counter-clockwise rotating flow is dominant. The general flow pattern inside the strip region is nearly not influenced by the strip speed Vs, flow rate Q and the scrapper location. In the exit region, the flow separated from the moving strip due to the existence of a stabilizing roll ascends to the free surface, for the cases of no scrapper and scrapper detached form the roll. On the other hand, the ascending flow to the free surface is decreased, as the flow rate Q of induction heater increases. By installing a baffle around the uprising strip, the flow moving up to the stabilizing roll decreases. In addition, B-type baffle is better than A-type baffle in reducing speed of flow around the stabilizing rolls. However, the flow ascended to the free surface is largely influenced by changing the flow rate Q, and the scrapper location, irrespective of the baffle type.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1224-1239
• /
• 2008

The earth retaining walls using stabilizing piles can be applied to shallow excavation works without any stiffener. But, It demends a variety of installed composite stiffener on the earth retaining walls when it is installed as deep excavation works. Because, it causes an excessive displacement of walls. This research tried to overcome the problems created by the above issues and intended to apply the composite stiffener. The model test, focused on the effect of installed composite stiffener, measured the bending stress with stabilizing piles and walls, the settlement of earth surface, the displacement of walls for a step excavation and an increase in strip load. With the test results and soil deformation analysis, the reinforcement effect(relating to control displacement and earth presure) was analyzed in a qualitative and quantitative manner. It is expected to overcome a deep excavation works.

• 공업화학
• /
• 제32권1호
• /
• pp.110-116
• /
• 2021

In this work, the surface of hydrophilic cellulose nanofibrils (CNFs) was modified precisely by varying amounts of cetyltrimethylammonium bromide (CTAB) to produce CNF-based particle surfactants. We found that a critical CTAB density was required to generate amphiphilic CTAB-grafted CNF (CNF-CTAB). Compared to pristine CNF, CNF-CTAB was highly efficient at stabilizing oil-in-water Pickering emulsions. To evaluate their effectiveness as particle surfactants, the surface coverage of oil-in-water emulsion droplets was determined by changing the CNF-CTAB concentration in the aqueous phase. Furthermore, styrene-in-water stabilized by CNF-CTAB surfactants was thermally polymerized to produce CNF-stabilized polystyrene (PS) particles, offering a great potential for various applications including pharmaceuticals, cosmetics, and petrochemicals.