• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제21권7호
• /
• pp.176-183
• /
• 2020

A ship has three types of diving systems (Diver Stage Diving, Wet Bell Diving and Scuba Diving) to carry out a search-and-rescue operation. To reduce the possibility of decompression sickness, any diving systems shall comply with the decompression procedure according to the decompression table corresponding to the diving depth and diving time. The decompression procedure is largely divided into two methods: underwater decompression and underwater-onboard decompression. In particular, the surface interval shall not exceed 5 minutes, which is the phase from underwater decompression to underwater-onboard decompression, in accordance with the U.S Navy Diving Manual. However, the surface interval is greater than 5 minutes as a result of using Wet Bell Diving. This paper describes the result of cause analysis and measurement with improved Wet Bell Diving. Using improved Wet Bell Diving reduced the surface interval to less than 5 minutes. The result of the research can be used for operation and improving the performance of diving systems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권4호
• /
• pp.750-769
• /
• 2015

The geometry of engineering systems affects their performances. For this reason, the shape of engineering systems needs to be optimized in the initial design stage. However, engineering system design problems consist of multi-objective optimization and the performance analysis using commercial code or numerical analysis is generally time-consuming. To solve these problems, many engineers perform the optimization using the approximation model (response surface). The Response Surface Method (RSM) is generally used to predict the system performance in engineering research field, but RSM presents some prediction errors for highly nonlinear systems. The major objective of this research is to establish an optimal design method for multi-objective problems and confirm its applicability. The proposed process is composed of three parts: definition of geometry, generation of response surface, and optimization process. To reduce the time for performance analysis and minimize the prediction errors, the approximation model is generated using the Backpropagation Artificial Neural Network (BPANN) which is considered as Neuro-Response Surface Method (NRSM). The optimization is done for the generated response surface by non-dominated sorting genetic algorithm-II (NSGA-II). Through case studies of marine system and ship structure (substructure of floating offshore wind turbine considering hydrodynamics performances and bulk carrier bottom stiffened panels considering structure performance), we have confirmed the applicability of the proposed method for multi-objective side constraint optimization problems.

• Journal of Ship and Ocean Technology
• /
• 제12권3호
• /
• pp.36-54
• /
• 2008

A jet stream applied tangential to a curved surface in fluid increases lift force by strengthening circulation around the surface and this phenomenon is known as the Coanda effect. Many experimental and numerical studies have been performed on the Coanda effect and the results found to be useful in various fields of aerodynamics. Recently, preliminary studies on Coanda control surface are in progress to look for practical application in marine hydrodynamics since various control surfaces are used to control behaviors of ships and offshore structures. In the present study, the performance of a Coanda control surface with different geometries of the jet injection nozzle was surveyed to assess applicability to ship rudders. A numerical simulation was carried out to study flow characteristics around a section of a horn type rudder subjected to a tangential jet stream. The RANS equations, discretized by a cell-centered finite volume method were used for this computation after verification by comparing to the experimental data available. Special attentions have been given to the sensitivity of the lift performance of a Coanda rudder to the location of the slit (outlet) and intake of the gap between the horn and rudder surface at the various angles of attack. It is found that the location of the water intake is important in enhancing the lift because the gap functions as a conduit of nozzle generating a jet sheet on the rudder surface.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2023년도 추계학술대회
• /
• pp.135-136
• /
• 2023

This study is an empirical result for building an onboard communication network using metal surface wave communication and is a consideration of its application within the ship. Over the past three years, the applicability and the performance of metal surface wave communication has been confirmed by testing on five small and medium ships. In the tests, IEEE 802.11 protocol of Wi-Fi was used, and the signals were generated in the form of surface waves. Data was sent from AP to AP in the point-to-point form, and the transmission speed was measured at the same time. If necessary, additional repeaters were used to extend the transmission distance. As derived a transmission speed of 5 to 100 Mbps in wireless communication restricted areas of the 5 ships, it is believed that it is possible to reduce the weight of ships and costs by eliminating the communication cables by using surface wave communication as the back-bone network on ships.

• Journal of the Society of Naval Architects of Korea
• /
• 제42권4호
• /
• pp.379-387
• /
• 2005

A ship may suffer sinkage and heel due to flood in a compartment caused by damage on a deck. The motion and waveloads of the heeled ship floating in waves have been analyzed by making use of a three dimensional potential theory taking account of the hydrodynamic pressure in the flooded compartments. The shear forces and bending moments due to radiation-diffraction waves have been calculated by the direct integration of the 3-d hydrodynamic pressure on the outer and inner hulls of floating barges. The motion responses and the relative flow rate across the mean free surface of the water in the flooded compartments are also presented.

• Journal of Advanced Marine Engineering and Technology
• /
• 제9권3호
• /
• pp.214-224
• /
• 1985

In this paper, some theoretical equations are derived to calculate natural frequencies and their modes of a portal type derrick system and developed a computer program to carry out their calculations. The ship's structures, such as funnels, upper decks, engine structures, shaft systems suffer local vibrations of the ship. The exciting forces of vibrations are induced by the bearing force and the surface force of propeller or by the main engine. For solving the vibration problem of riggings like the derrick system the natural frequency of its system must be exactly estimated as far as possible and its resonance condition must be kept out of the normal engine operating speed range. When some severe resonances are encountered after the ship's launching, it may be required a tremendous cost to amend their condition. An experimental model of the portal type derrick is made, which is composed of two posts and a truss. This experimental model is excited by an electrical-magnet, and its vibration responses are found out. The calculating results of the model by the developed computer program are compared with those of measured values of model experiment, and they show fairly good agreements.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제9권3호
• /
• pp.41-47
• /
• 2006

Naval combat system is total management system integrating a ship and several weapon system functions. For the mission of a ship, naval combat system manages features and constraints of each weapon system. Proper treats of each weapon system's conditions guarantee effective performances of naval combat system. In this paper, the relationship of anti-air weapon system's on board position and self-defence effectiveness against anti-surface missiles is studied

• Bulletin of the Society of Naval Architects of Korea
• /
• 제22권2호
• /
• pp.12-26
• /
• 1985

This paper describes the experimental method to predict the propeller induced fluctuating pressure on the hull surface. Cavitations of the three model propellers with varying degree of skews, $0^{\circ},\;36^{\circ}\;and\;72^{\circ}$, were observed and the fluctuating pressure induced by the cavitating propellers in the flat plate above these propellers were measured simultaneously at 9 points in the wake field generated by the wire-mesh screens. Another model propeller designed for the dummy model ship was tested in a similar way behind the dummy model ship. The effects of skew variation on the cavitation patterns and fluctuating pressures were illustrated, and the influence of tip-clearances on the fluctuating pressures was also demonstrated. As a result, it is shown that the level of fluctuating pressure and cavity extent could be controlled to some extent by introducing the skews and tip clearances.

• Journal of the Korean Institute of Navigation
• /
• 제19권2호
• /
• pp.13-22
• /
• 1995

This paper presents the numerical analysis results of the viscous flow for a full ship model. The mass and momentum conservation equations are used for governing equations, and the flow field is discretized by the Finite-Volume Method for the numerical calculation. An algebraic grid and elliptic grid generation techniques are adopted for generation of the body-fitted coordinates system, which is suitable to ship's hull forms. Time-marching procedure is used to solve the three-dimensional unsteady problem, where the convection terms are approximated by the QUICK scheme and the 2nd-order central differencing scheme is used for other spatial derivatives. A Sub-Grid Scale turbulence model is used to approximate the turbulence, and the wall function is used at the body surface. Pressure and velocity fields are calculated by the simultaneous iteration method. Numerical calculations were accomplished for the Crude Oil Tanker(DWT 95,000tons, Cb=0.805) model. Calculation results are compared to the experimental results and show good agreements.

• Journal of Ship and Ocean Technology
• /
• 제4권2호
• /
• pp.1-12
• /
• 2000

The present study concentrates on the weak-scatterer hypothesis for the nonlinear wave-body interaction problems. In this method, the free surface boundary conditions are linearized on the incoming wave profile and the exact body motion is applied. The considered problems are the diffraction problem near a circular cylinder and the ship response in oblique waves. The numerical method of solution is a Rankine panel method. The Rankine panel method of this study adopts the higher-order B spline basis function for the approximation of physical variables. A modified Euler scheme is applied for the time stepping, which has neutral stability. The computational result shows some nonlinear behaviors of disturbance waves and wave forces. Moreover, the ship response shows very close results to experimental data.