• 천문학회보
• /
• 제44권2호
• /
• pp.76.3-76.3
• /
• 2019

Intracluster stars are believed to be gravitationally bound to a galaxy cluster, however, not to individual cluster galaxies. Their presence is observed as diffuse light typically in the central region extended from the brightest cluster galaxy. The diffuse light, often referred to as intracluster light (ICL), is difficult to quantify in distant high-redshift galaxy clusters because of the significant surface brightness dimming although ICL observations in high-redshift clusters provide powerful constraints on the origin of intracluster stars. In this poster, we present ICL study of the distant galaxy cluster SPT2106-5844 at z=1.132 with Hubble Space Telescope IR imaging data. With careful control of systematics, we successfully quantify the total amount of the ICL, measure the color profile, and obtain its two-dimensional distribution. Our measurement of the high abundance of the intracluster stars in this young cluster favors the ICL formation scenario, wherein production of intracluster stars are predominantly associated with the BCG formation.

• 한국수자원학회논문집
• /
• 제38권11호
• /
• pp.917-925
• /
• 2005

LSIV은 표면유속을 측정하는 영상기반 유속측정법중의 하나이다. 이 방법은 기존 측정기법에 비해 측정이 용이할 뿐만 아니라 경제적이기 때문에 유량측정 등의 실제 하천의 유속 측정에 활용하려는 연구들이 시도되고 있다. 그러나 이 기법은 표면유속을 측정하기 때문에 유량 산정을 위해서는 측정된 표면유속을 평균유속으로 환산할 수 있는 방법이 필요하다. 본 연구에서는 하상 및 흐름조건에 대한 다양한 수리실험을 통해 개수로 난류 흐름에 대한 연직유속분포의 특성을 파악하였다. 수리실험결과 수표면 영역의 유속감소를 확인하였으며, 이러한 유속감소는 조도보다는 Froude 수의 영향이 더 큰 것으로 나타났다. 실험 결과를 이용하여 표면유속으로부터 평균유속을 추정하는 두 가지 방법을 제시하였다. 제안된 방법들은 표면유속 보정량을 이용하여 후류법칙의 유속분포를 보정하는 방법과 평균유속과 표면유속의 비를 이용한 방법이다. 제시된 방법들은 실제 하천의 유속 측정 자료들을 이용하여 검증하였다 검증결과 이 방법들은 $6\%$ 이내의 오차를 보이는 것으로 나타났다.

• 한국농공학회지
• /
• 제35권3호
• /
• pp.36-46
• /
• 1993

The purposes of this study are to develop three-layered Green-Ampt infiltration model considering temporal variation of physical properties of soil and to evaluate the model with field experiment on bare-tilled and soybean-growing soil plots under natural rainfalls. Infiltration tests were conducted on a sandy loam soil. The model has three-layered soil profile including a surface crust, a tilled layer, a subsoil and considers temporal variation of porosity, hydraulic conductivity, capillary pressure head on a tilled layer by natural rainfalls and canopy density variation of crop. Field measurement of porosity, average hydraulic conductivity and average capillary presure head on a tilled layer were conducted by soil sampler and air-entry permeameter at regular intervals-after tillage. It was found that temporal variation of porosity and average hydraulic conductivity might be expressed as a function of cumulative rainfall energy and average capillary pressure head might be expressed as a function of porosity of a tilled soil. The model was calibrated by an optimization technique, Hooke and Jeeves method using hourly surface runoff data. With the calibrated parameters, the model was verified satisfactorily.

• 한국표면공학회지
• /
• 제52권6호
• /
• pp.342-349
• /
• 2019

Titanium nitride(TiN) thin films have been deposited on PEN(Polyethylene naphthalate) substrate by reactive RF(13.56 MHz) magnetron sputtering in a 25% N₂/Ar mixed gas atmosphere. The pulsed DC bias voltage of -50V on substrates was applied with a frequency of 350 kHz, and duty ratio of 40%(1.1 ㎲). The effects of pulsed DC substrate bias voltage on the crystallinity, color, electrical properties of TiN_x films have been investigated using XRD, SEM, XPS and measurement of the electrical properties such as electrical conductivity, carrier concentration, mobility. The deposition rates of TiN_x films was decreased with application of the pulsed DC substrate bias voltage. The TiN_x films deposited without and with pulsed bias of -50V to substrate exhibits gray and gold colors, respectively. XPS depth profiling revealed that the introduction of the substrate bias voltage resulted in decreasing oxygen concentration in TiN_x films, and increasing the electrical conductivities, carrier concentration, and mobility to about 10 times, 5 times, and 2 times degree, respectively.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.371-379
• /
• 2021

The use of anti-corrosive oil (AC) is inevitable for production of industrial steels to prevent corrosion. The AC is degreased before application of steels, which crucially effects on final products, such as automobile, electricity etc. However, qualitative/quantitative evaluation of degreasing performance are steal insufficient. In this study, degreasing performance of anti-corrosive oil on steel have been studied through X-ray photon spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Commercial automotive steels (AMS) are coated with 4 different anti-corrosive oils (namely AC1-AC4). In XPS, intensity of C1s peak remained after degreasing indirectly indicates incomplete degreasing. Thus, higher C1s peak intensity means less effective degreasing by degreasing agent. peak intensity of C1s peak shows opposite tendency of peak intensity of O1s. We found that EIS analysis is not applicable to mild steel (such as AMS1) due to corrosion during measurement. However, alloy steel can be fully analyzed by EIS and XPS depth profile.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.98-105
• /
• 2001

The machining accuracy is affected by geometric, volumetric errors of the machine tools. To improve the product quality, we need to enhance the machining accuracy of the machine tools. To this point of view, measurement and inspection of finished part as error analysis of machine tools ahas been studied for last several decades. This paper suggests the enhancement method of machining accuracy for precision machining of high quality metal reflection mirror or optics lens, etc. In this paper, we study 1) the compensation of linear pitch error with NC controller compensation function using laser interferometer measurement, 2) the method for enhancing the accuracy of NC milling machining by modeling and compensation of volumetric error, 3) the spherical surface manufacturing by modeling and compensation of volumetric error of the machine tool, 4) the system development of OMM without detaching work piece from a bed of machine tool after working, 5) the generation of the finished part profile by OMM. Furthermore, the output of OMM is compared with that of CMM, and verified the feasibility of the measurement system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.599-603
• /
• 2003

This paper present an error compensation system and On-Machine Measurement(OMM) system for improving the machining accuracy of ultra-precision lathe. The Fast-Tool-Servo(FTS) driven by a piezoelectric actuator is applied for error compensation system. The controller is implemented on the 32bit DSP for feedback control of piezoelectric actuator. The control system is designed to compensates three kinds of machining errors such as the straightness error of X-axis slide, the thermal growth error of the spindle. and the squareness between spindle and X-axis slide. OMM is preposed to measure the finished profile of workpiece on the machine-tool using capacitive sensor with highly accurate ruby tip probe guided by air bearing. The data acquisition system is linked to the CNC controller to get the position of each axis in real-time. Through the experiments, it is founded that the thermal growth of spindle and tile squareness error between spindle and X-axis slide influenced to machining error more than straightness error of X-axis slide in small travel length. These errors were simulated as a sinusoidal signal which has very low frequency and the FTS could compensate the signal less than 30 m. The implemented OMM system has been tested by measuring flat surface of 50 mm diameter and shows measurement error less than 400 mm

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.27-32
• /
• 2008

This paper describes a contact atomic force microscope (AFM) that can be used for high-speed precision measurements of microstructured surfaces. The AFM is composed of an air-bearing X stage, an air-bearing spindle with the axis of rotation in the Z direction, and an AFM probe unit. The traversing distance and maximum speed of the X stage are 300 mm and 400 mm/s, respectively. The spindle has the ability to hold a sample in a vacuum chuck with a maximum diameter of 130 mm and has a maximum rotation speed of 300 rpm. The bandwidth of the AFM probe unit in an open loop control circuit is more than 40 kHz. To achieve precision measurements of microstructured surfaces with slopes, a scanning strategy combining constant height measurements with a slope compensation technique is proposed. In this scanning strategy, the Z direction PZT actuator of the AFM probe unit is employed to compensate for the slope of the sample surface while the microstructures are scanned by the AFM probe at a constant height. The precision of such a scanning strategy is demonstrated by obtaining profile measurements of a microstructure surface at a series of scanning speeds ranging from 0.1 to 20.0 mm/s.

• 한국음향학회지
• /
• 제38권5호
• /
• pp.494-510
• /
• 2019

수중음향통신시스템의 모뎀이나 채널 코딩 설계를 위한 채널 매개변수는 임펄스 응답, 지연 확산, 산란함수, 도플러 확산, 상관 대역폭, 주파수 선택적 페이딩, 상관 시간 및 시변 진폭 페이딩의 통계적 분포 함수 등이다. 이들 매개 변수들은 주어진 해양 음향 조건에서 수층의 음속 구조, 플렛폼의 운동이나 해면의 거칠기에 영향을 받는다. 본 논문에서는 송수신기 고정 천해 수중음향통신 채널에 대한 페이저 기반의 채널 모델과 모의실험 및 채널 매개변수들의 측정과 분석 방법을 제시하고 천해의 실험 자료를 이용하여 이들 매개변수들을 해석하였다. 송수신기 거리가 300 m와 600 m에 대한 이들 매개 변수들은 직접파, 산란 성분을 갖는 해면 반사파 및 해저 반사파로 구성되는 3개 다중 경로에 의해 그 특징이 결정됨을 보인다. 연구의 결과는 천해 고정 시스템의 채널 모델 방법, 채널 매개변수들의 측정과 분석 방법 및 시스템 설계와 성능평가 방법을 제시한다.

• Journal of Radiation Protection and Research
• /
• 제36권3호
• /
• pp.168-173
• /
• 2011

본 연구는 조사통(electron cone)에 삽입되는 전자선 차폐물의 제작방법에 따른 X-선과 전자선의 인접 조사면의 선량분포 특성을 알아보고자 하였다. 차폐물의 제작은 전자선속 퍼짐현상을 고려한 차폐물(divergency block)과 고려하지 않은 차폐물(straight block)을 구분하여 제작하였다. 6 MV X-선과 10 MeV 전자선을 대상으로 표면에서 X-선과 전자선의 조사면을 인접시키고 측정 깊이 0, 1, 2, 3 cm에서 빔 측면도(beam profile)를 측정하였다. 측정 결과 인접 조사면의 선량분포는 straight block의 경우, 기준 투여선량의 5%를 초과하는 고선량 영역과 인접 조사면에서 급격한 선량분포를 형성하였으나 divergency block의 경우, 측방산란효과가 감소함으로서 고선량 영역이 현저하게 감소하였으며 인접 조사면에서 균일한 선량분포를 보였다. 따라서 전자선속 퍼짐을 고려한 경우 선량학적 이점을 제공하였고 이를 임상에 적용하기 위하여 전자선의 차폐물 제작방법에 따른 선량측정을 신중하게 고려해야 할 것이다.