• 천문학회보
• /
• 제44권2호
• /
• pp.37.1-37.1
• /
• 2019

We perform Lyα radiative transfer calculations for reproducing Lyα properties of star-forming galaxies at high redshifts. We model a galaxy as a halo in which the density distributions of Lyα sources and HI plus dust medium are described with exponential functions. We also consider an outflow of the medium that represents a momentum-driven wind in a gravitational potential well. We demonstrate that this outflowing halo model with Lyα scattering can successfully reproduce both the spectrum and the surface brightness profile of eight star-forming galaxies at z=3-6 observed with MUSE. The best-fit model parameters (i.e., the outflowing velocity and optical depth) for these galaxies are in good agreement with other studies. We also demonstrate benefits of using spectrum and surface brightness profile simultaneously to the constraints on model parameters and thus spatial/kinematic distributions of medium. We examine the impacts of individual model parameters and intrinsic spectrum on emerging spectrum and surface brightness profile. Further investigations on the escape fraction, spatially resolved spectra, and the spatial extent of Lyα halos are presented as well.

• 소성∙가공
• /
• 제7권1호
• /
• pp.66-71
• /
• 1998

The present study is concerned with the hydrostatic extrusion process of copper-clad aluminium bar to investigate the bonding conditions as well as the basic flow characteristics. Considering the bonding mechanism of bi-metal contact surface as cold pressure welding the normal pressure and the contact surface expansion are selected as process parameters governing the bonding conditions, in this study the critical normal pressure required for the local extrusion-the protrusion of virgin surfaces by the surface expansion at the interface-is obtained using a slip line method and is then used as a criteron for the bonding. A rigid plastic finite element method is used to analyze the steady state extrusion process. The interface profile of bi-metal rod is predicted by tracking the paths of two particles adja-process. The interface profile of bi-metal rod is predicted by tracking the paths of two particles adja-cent to interface surface. The contact surface area ration and the normal pressure along the interface are calculated and compared to the critical normal pressure to check bonding. It is found that the model predictions are generally in good agreement with the experimental observations. The compar-isons of the extrusion pressure and interface profile by the finite element with those by experi-ments are also given.

• 한국안전학회지
• /
• 제16권3호
• /
• pp.35-40
• /
• 2001

An internal finishing process applying Magnetic Abrasive Finishing (MAF) was proposed to produce smooth inner surfaces of tubes at a high rate. Since this process uses the tube rotation system, it has been considered applicable only to tubes which are rotatable at high speeds. Here development of the stainless tube(STS 304) rotation system to extend the scope of the application of the internal finishing process applying MAF was made. By the stainless tube(STS 304) rotation system, the abrasive magnetically attracted by the poles is rotated along the inner surface of the tube by magnetic force together with fixed poles, finishing the inner surface of the tube. The main results obtained are as follows : 1) The magnet abrasive finishing minimized influence due to external force because non-contact finishing, 2) The profile of surface roughness decreased very good in 11.4m/min range because abrasive size and speed, 3) The profile of surface roughness by flux density decreased in finishing speed 28m/min, 4) The profile of surface roughness by fled rate decreased in 0.16mm/rev and 0.18mm/rev.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.236-243
• /
• 2014

Surface profiling and film thickness measurement play an important role for inspection. White light interferometry is widely used for engineering surfaces profiling, but its applications are limited primarily to opaque surfaces with relatively simple optical reflection behavior. The conventional bucket algorithm had given inaccurate surface profiles because of the phase error that occurs when a thin-film exists on the top of the surface. Recently, reflectometry and white light scanning interferometry were combined to measure the film thickness and surface profile. These techniques, however, have found that many local minima exist, so it is necessary to make proper initial guesses to reach the global minimum quickly. In this paper we propose combing reflectometry and white light scanning interferometry to measure the thin-film thickness and surface profile. The key idea is to divide the measurement into two states; reflectometry mode and interferometry mode to obtain the thickness and profile separately. Interferogram modeling, which considers transparent thin-film, was proposed to determine parameters such as height and thickness. With the proposed method, the ambiguity in determining the thickness and the surface has been eliminated. Standard thickness specimens were measured using the proposed method. Multi-layered film measurement results were compared with AFM measurement results. The comparison showed that surface profile and thin-film thickness can be measured successfully through the proposed method.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.330-336
• /
• 2019

Conditioning is a process involving pad surface scraping by a moving metallic disk that is electrodeposited with diamond abrasives. It is an indispensable process in chemical-mechanical planarization, which regulates the pad roughness by removing the surface residues. Additionally, conditioning maintains the material removal rates and increases the pad lifetime. As the conditioning continues, the pad profile becomes unevenly to be deformed, which causes poor polishing quality. Simulation calculates the density at which the diamond abrasives on the conditioner scratch the unit area on the pad. It can predict the profile deformation through the control of conditioner dwell time. Previously, this effect of the diamond shape on conditioning has been investigated with regard to microscopic areas, such as surface roughness, rather than global pad-profile deformation. In this study, the effect of diamond shape on the pad profile is evaluated by comparing the simulated and experimental conditioning using two conditioners: a) random-shaped abrasive conditioner (RSC) and b) uniform-shaped abrasive conditioner (USC). Consequently, it is confirmed that the USC is incapable of controlling the pad profile, which is consistent with the simulation results.

• 지구물리
• /
• 제5권3호
• /
• pp.233-245
• /
• 2002

이 연구에서는 표면파의 분산 특성을 지반 공학에 적용하여 비파괴 시험으로 강성도 프로파일(stiffness profile of shear)를 얻는 방법인 표면파 기법(SASW, spectral analysis of surface waves)의 효율적이고 경제적인 역산을 수행하기 위하여 해석적으로 자코비안을 도출하였다. 표면파 기법은 지하구조를 균질한 수평 층으로 가정하여 레일리 파의 파장 대 위상 속도 관계인 분산 곡선으로부터 레일리 파와 전단파 간의 속도 비례 관계를 이용하여 지하 천부의 전단파 속도 구조를 파악하는 방법이다. 해석적으로 자코비안 식을 유도하여 역산을 수행하므로서 수치적으로 자코비안을 구해 역산을 수행하는 방법에 비해 지하구조를 N개의 수평 층으로 나누었을 때 계산 시간을 2N 배 빠르게 역산을 수행할 수 있었다. 차분 전개를 통한 이론 분산 곡선 응답 반응 알고리즘으로 이론분산 곡선을 구한 후 해석적으로 도출한 자코비안을 이용하여 제한 조건을 가한 감쇠 최소 자승법을 이용하여 이론 모형에 대한 반응 양상을 검토, 고찰하여 타당성을 검증하였다. 물리적 특성을 직접 확인할 수 있었던 현장의 도로 포장체에 대해 적용하므로서 현장 적용 가능성을 확인하였다. 또한 표면파 기법의 응용으로 터널의 숏크리트 두께 및 배면의 전단파 주상도를 얻을 수 있었고 이로부터 터널의 건전성 평가를 내릴 수 있는 가능성을 제시하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.136-145
• /
• 1999

This paper describes the surface roughness effect in parallel thrust bearing. In mixed lubrication, some contacts will take place between asperities, and partial lubrication will occur. An average Reynolds Equation is utilized to determine effects of surface roughness on partially lubricated contacts. By using an autocorrelation function for the surface profile, surface model is generated numerically Although the two surfaces are parallel in thrust bearing separated by thin film, the pressure peak is formed due to asperites. By means of surface profile parameters, it is shown that which surface is optimal for the parallel thrust bearing.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.200-207
• /
• 1999

A new method for the calculation of a wear amount was suggested. The amount of wear was calculated by the comparison of worn out profile with an estimated original profile. An original profile of wear track was estimated by comparing with outside of wear track. An estimated surface profile was well fitted to the original profile assumed unknown.

• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.81-86
• /
• 2008

I present a 3-D profiler specially devised for the profile measurement of specular surfaces that requires precision shape accuracy up to a few nanometer. A profile is reconstructed from the curvature of a test part of the surface at several locations along a line. The local curvature data are acquired with White-light Scanning Interferometry. Test measurement proves that the proposed profiler is well suited for the specular surface inspection like precision mirror.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.230-235
• /
• 2000

In this paper, a surface generation model is presented to simulate surface roughness profile in turning operation. The simulation model takes into account the effect of tool geometry, process parameters, rotational errors of spindle, and the relative vibration between the cutting tool and workpiece. The surface roughness profiles are simulated based on the surface-shaping system. The model has been verified by comparing the experimental values with the simulation values. It is shown that the surface simulation model can properly predict the surface roughness profile.