• 제목/요약/키워드: Surface ordering

검색결과 63건 처리시간 0.027초

Polymer Layer Effects on Anchoring Strength and Surface Ordering in NLC, 5CB, by the Washing Process after Rubbing on the Polyimide Surfaces

  • Lee, Sang-Keuk;Han, Jeong-Min;Hwang, Jeoung-Yeon;Seo, Dae-Shik
    • Transactions on Electrical and Electronic Materials
    • /
    • 제4권2호
    • /
    • pp.5-9
    • /
    • 2003
  • The liquid crystal (LC) aligning capabilities by the washing processes after rubbing on the two kinds of the rubbed polyimide (Pl) surface were studied. The polar anchoring energy of 4-n-pentyl-4'-cyanobiphenyl (5CB) increased with the rubbing strength RS on the two kinds of the rubbed PI surface. The polar anchoring energy of 5CB on the rubbed PI surface with alkyl side chains is larger than the rubbed PI surface with CONH moiety. Also, the surface ordering of 5CB on the rubbed PI surface with alkyl side chains is larger than the rubbed PI surface with CONH moiety. Therefore, the surface ordering of 5CB strongly depends on the polymers and washing process.

Polymer Layer Effects on Anchoring Strength and Surface Ordering in NLC, 5CB, by the Washing Process after Rubbing on the Polyimide Surfaces

  • 이상극;이준웅;한정민;황정연;서대식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
    • /
    • pp.506-509
    • /
    • 2003
  • The liquid crystal (LC) aligning capabilities by the washing processes after rubbing on the two kinds of the rubbed polyimide (PI) surface were studied. The polar anchoring energy of 4-n-pentyl-4'-cyanobiphenyl (5CB) increased with the rubbing strength RS on the two kinds of the rubbed PI surface. The polar anchoring energy of 5CB on the rubbed PI surface with alkyl side chains is larger than the rubbed PI surface with CONH moiety. Also, the surface ordering of 5CB on the rubbed PI surface with alkyl side chains is larger than the rubbed PI surface with CONH moiety. Therefore, the surface ordering of 5CB strongly depends on the polymers and washing process.

  • PDF

H-induced Magnetism at Stepped Si (100) Surface

  • Lee, Jun-Ho;Cho, Jun-Hyung
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.211-211
    • /
    • 2012
  • Using spin-polarized density-functional theory calculations, we find that the existence of either Peierls instability or antiferromagnetic spin ordering is sensitive to hydrogen passivation near the step. As hydrogens are covered on the terrace, the dangling bond electrons are localized at the step, leading to step-induced states. We investigate the competition between charge and spin orderings in dangling-bond (DB) wires of increasing lengths fabricated on an H-terminated vicinal Si(001) surface. We find antiferromagnetic (AF) ordering to be energetically much more favorable than charge ordering. The energy preference of AF ordering shrinks in an oscillatory way as the wire length increases. This oscillatory behavior can be interpreted in terms of quantum size effects as the DB electrons fill discrete quantum levels.

  • PDF

A SURFACE RECONSTRUCTION METHOD FOR SCATTERED POINTS ON PARALLEL CROSS SECTIONS

  • Kim, Phil-Su
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제9권2호
    • /
    • pp.29-43
    • /
    • 2005
  • We consider a surface reconstruction problem from geometrical points (i.e., points given without any order) distributed on a series of smooth parallel cross sections in ${\mathbb{R}}^3$. To solve the problem, we utilize the natural points ordering method in ${\mathbb{R}}^2$, described in [18], which is a method of reconstructing a curve from a set of sample points and is based on the concept of diffusion motions of a small object from one point to the other point. With only the information of the positions of these geometrical points, we construct an acceptable surface consisting of triangular facets using a heuristic algorithm to link a pair of parallel cross-sections constructed via the natural points ordering method. We show numerical simulations for the proposed algorithm with some sets of sample points.

  • PDF

Vertical Alignment of Liquid Crystals by Ordering Effect of Self-assembled Monolayers on the Ion-beam-irradiated Anisotropic Surface

  • Park, Ji-Sub;Seok, Keun-Yeong;Hwang, Soo-Won;Kim, Jae-Chang;Yoon, Tae-Hoon;Kim, Jae-Hoon;Kim, Hak-Rin
    • Journal of Information Display
    • /
    • 제11권4호
    • /
    • pp.144-148
    • /
    • 2010
  • In this paper, vertically aligned (VA) liquid crystal (LC) modes were investigated using the alkyl chain ordering effect of self-assembled monolayers (SAMs) prepared on the anisotropic inorganic surface. On the anisotropic surface prepared through oblique ion beam irradiations, the SAM molecules are adsorbed, producing macroscopic alkyl chain ordering, which can determine the pretilt direction of the vertically aligned LC molecules through the intermolecular interactions on the surface.

Polar Anchoring Strength and Surface Ordering in NLC by the Washing Process on Rubbed Polymer Surfaces Containing Trifluoromethyl Moiety

  • Lee, Sang-Keuk;Lee, Joon-Ung;Han, Jeong-Min;Hwang, Jeoung-Yeon;Seo, Dae-Shik;Paek, Seung-Kwon
    • Transactions on Electrical and Electronic Materials
    • /
    • 제3권4호
    • /
    • pp.36-40
    • /
    • 2002
  • The polar anchoring strength and surface ordering in a NLC,4-n-pentyl-4'-cyanobiphenyl (5CB), on a rubbed polyimide (PI) surface containing trifluoromethyl moiety were studied. The large extrapolation length de of 5CB for washing process of water was measured at RS=114 mm. The polar anchoring energy of 5CB on the rubbed PI surface is decreased by the washing process. Also, the polar anchoring energy of 5CB increases with the rubbing strength on the PI surface. The surface ordering of 5CB for all washing processes is smaller than the non-washing process; it is attributed to the washing process.

Bi-stability in a vertically excited rectangular tank with finite liquid depth

  • Spandonidis, Christos C.;Spyrou, Kostas J.
    • Ocean Systems Engineering
    • /
    • 제2권3호
    • /
    • pp.229-238
    • /
    • 2012
  • We discuss the bi - stability that is possibly exhibited by a liquid free surface in a parametrically - driven two-dimensional (2D) rectangular tank with finite liquid depth. Following the method of adaptive mode ordering, assuming two dominant modes and retaining polynomial nonlinearities up to third-order, a nonlinear finite-dimensional nonlinear modal system approximation is obtained. A "continuation method" of nonlinear dynamics is then used in order to elicit efficiently the instability boundary in parameters' space and to predict how steady surface elevation changes as the frequency and/or the amplitude of excitation are varied. Results are compared against those of the linear version of the system (that is a Mathieu-type model) and furthermore, against an intermediate model also derived with formal mode ordering, that is based on a second - order ordinary differential equation having nonlinearities due to products of elevation with elevation velocity or acceleration. The investigation verifies that, in parameters space, there must be a region, inside the quiescent region, where liquid surface instability is exhibited. There, behaviour depends on initial conditions and a wave form would be realised only if the free surface was substantially disturbed initially.

Zinc Vacancy Ordering in BaTEX>$(Zn_1/3Ta2/3)O_3$Ceramics

  • Park, Seong-Jin;Sahn Nahm;Kim, Myong-Ho;Byun, Jae-Dong
    • The Korean Journal of Ceramics
    • /
    • 제2권4호
    • /
    • pp.242-245
    • /
    • 1996
  • The microstructure of $Ba (Zn_{1/3}Ta_{2/3})O_3$ (BZT) was investigated using X-ray diffractometry(XRD) and transmission electron microscopy (TEM). $Ba_{0.5}TaO_3$ and $Ba_3TaO_{5.5}$ (BT) phasses were observed on the surface of the sintered specimen by XRD. Furthermore, a new type of ordering along the [110] direction was found in sintered specimen by the XRD and TEM analysis. The wavelength of ordering was 0.9 nm which is three times larger than the interplanar distance of (110) plane and new type of ordering is considered to be a result of Zn vacancy ordering. The creation of Zn vacancies and formation of BT phases are attributed to the evaporation of volatile ZnO. A new mechanism for ZnO loss is suggested. In this mechanism, only Zn vacancies are created only when the amount of ZnO loss is small and as the amount of ZnO loss increases, BT phases are formed at the same time. A new unit cell of ordered structure is suggested as the superlattics containing three BZT unit cells.

  • PDF

Anchoring Strength Characteristics by the Washing Process after Rubbing on the Polyimide Layers

  • Lee, Sang-Keuk;Lee, Joon-Ung;Han, Jeong-Min;Hwang, Jeoung-Yeon;Paek, Seung-Kwon;Seo, Dae-Shik
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.1078-1081
    • /
    • 2003
  • The polar anchoring strength and surface ordering in a NLC, 4-n-pentyl-4'-cyanobiphenyl (5CB), on a rubbed polyimide (PI) surface containing trifluoromethyl moiety were studied. The large extrapolation length de of 5CB for washing process of water was measured at RS=114 mm. The polar anchoring energy of 5CB on the rubbed PI surface is decreased by the washing process. Also, the polar anchoring energy of 5CB increases with the rubbing strength on the PI surface. The surface ordering of 5CB for all washing processes is smaller than the non-washing process; it is attributed to the washing process.

  • PDF

Peierls Instability and Spin Ordering in Graphene

  • 김현중;조준형
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.204-204
    • /
    • 2012
  • Peierls instability and spin ordering of zigzag graphene nanoribbons (GNR) created on a fully hydrogenated graphene (graphane) are investigated as a function of their width using first-principles density-functional calculations within the generalized-gradient approximation. For the width containing a single zigzag C chain (N=1), we find the presence of a Peierls instability with a bond alternated structure. However, for width greater than N=1, the Peierls distortion is weakened or disappears because of the incommensurate feature of Fermi surface nesting due to the interaction of C chains. Instead, there exists the antiferromagnetic (AFM) spin ordering in which the edge states are ferromagnetically ordered but the two ferromagnetic (FM) edges are antiferromagnetically coupled with each other, showing that electron-lattice coupling and spin ordering in GNR are delicately competing at an extremely thin width of N=2. It is found that, as the width of GNR increases, the energy gain arising from spin ordering is enhanced, but the energy difference between the AFM and FM (where two edge states are ferromagnetically coupled with each other) orderings decreases.

  • PDF