• Economic and Environmental Geology
• /
• v.23 no.3
• /
• pp.353-358
• /
• 1990

This paper presents numerical experiments on migration of synthetic seismograms using by $45^{\circ}$ wave equation. The seismograms used are zero-offset seismogram (corresponding to stacked section) on point reflectors, dipping plane reflector, faulted and folded layers. The seismograms are constructed by upward continuation of seismic source wavelets, exploading on subsurface reflection interfaces, to the earth surface. The synthetic seismograms are migrated by downward continuation and imaging. The upward and downward continuations are implemented by solving the $45^{\circ}$ wave equation with the finite-difference method. Migration of the synthetic data used in this study results in relatively accurate reposition of subsurface structures while the synthetic sections are quite different from the structures.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2669-2672
• /
• 2014

Double bond migration of butene-2 to butene-1 over ${\eta}$-alumina was investigated. The effects of calcination temperature on catalytic properties were analyzed by applying BET surface area, XRD, $NH_3$-TPD, and FT-IR of adsorbed pyridine techniques. The highest activity of the ${\eta}$-alumina catalyst calcined at $600^{\circ}C$ could be attributed not only to the highest amount of weak and medium strength acid sites, but also to the highest ratio of medium to weak strength Lewis acid sites.

• Journal of the Korean Ceramic Society
• /
• v.29 no.11
• /
• pp.912-918
• /
• 1992

Microstructure evolution including morphological change in the vicinity of the electrodes, porosity change and grain boundary migration was observed in polycrystalline CoO subject to electric fields at 1100 and 121$0^{\circ}C$ in air. At the cathode, the transported cations react with oxygen in the surrounding to form new lattices, while, at the anode, the reverse reaction occurs leading to lattice annihilation. Lattice formation also takes place at the surface of pores near the cathode inducing pore-filling effect. Grain boundary migration was found bo be enhanced or retarded depending on the field direction. It is therefore implied that the driving force of grain boundary migration is the vectorial sum of the curvature-induced chemical potential gradient and the electric field applied.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.11-18
• /
• 2005

Filament inversion routines are highly effective for target definition whenever total-field DHTEM vectors can be obtained using three-component logging tools. However most cross-hole components contain significant noise related to sensor design and errors in observation of probe rotation. Standard stacking methods can be used to improve data quality but additional statistical methods based on cross-correlation and spatial averaging of orthogonal components may be required to ensure a consistent vector migration path. Apart from assisting with spatial averaging, multiple filaments generated for successive time-windows can provide additional imaging information relating to target geometry and current migration. New digital receiver systems provide additional time-windows to provide better tracking options necessary for high-resolution imaging of this type.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1521-1527
• /
• 2004

Thermocapillary migration of a liquid slug is caused by temperature difference between the ends of a slug. The temperature difference induces the difference of the surface tension coefficient and consequently of capillary pressure between the ends of the slug. Presently available model to predict a velocity of thermocapillary migration adopts the Poiseuille equation which is valid only for a very long slug and neglects the shear stress near the contact line. In the present study, a new model has been developed to consider the shear stress near the contact line so that it can be applied to slugs or drops of general configuration. The experiments using mineral oil with the length to diameter ratio being 10 and a glass capillary were performed. It was found that the liquid slug began to move upon overcoming contact angle hysteresis when the temperature difference reached 35$^{\circ}C$. The results indicate that the new model well predicts the velocity of the liquid slug.

• BMB Reports
• /
• v.41 no.12
• /
• pp.858-862
• /
• 2008

Membrane-type 1 matrix metalloproteinase (MT1-MMP) is a zinc-dependent proteinase found in cholesterol-rich lipid rafts on the plasma membrane. MT1-MMP hydrolyzes extracellular matrix (ECM) proteins, activates pro-matrix metalloproteinase-2 (proMMP-2) and plays an important role in ECM remodeling, cancer cell migration and metastasis. The role of caveolin-1, an integral protein of caveolae, in the activation of MT1-MMP remains largely unknown. Here, we show that the expression of caveolin-1 attenuates the activation of proMMP-2, reduces proteolytic cleavage of ECM and inhibits cell migration. We utilized the cytoplasmic tail domain deletion (${\Delta}CT$) or the E240A mutant of MT1-MMP. Co-expression of caveolin-1 with the wild-type or the ${\Delta}CT$ MT1-MMP decreased the proMMP-2 activation and inhibited collagen degradation and cell migration. Caveolin-1 had no effect on the catalytically inert E240A MT1-MMP. Our findings suggest that caveolin-1 is essential in the down-regulation of MT1-MMP activity by promoting internalization from the cell surface.

• Membrane and Water Treatment
• /
• v.14 no.2
• /
• pp.95-106
• /
• 2023

In the developing country like India, groundwater is the main sources for household, irrigation and industrial use. Its contamination poses hydro-geological and environmental concern. The hazardous waste sites such as landfills can lead to contamination of ground water. The contaminants existing at such sites can eventually find ingress down through the soil and into the groundwater in case of leakage. It is necessary to understand the process of migration of pollutants through sub-surface porous medium for avoiding health risks. On this backdrop, the present paper investigates the behavior of pollutants' migration through porous media. The laboratory experiments were carried out on a soil-column model that represents porous media. Two different types of soils (standard sand and red soil) were considered as the media. Further, two different solutes, i.e., non-reactive and reactive, were used. The experimental results are simulated through numerical modeling. The percentage variation in the experimental and numerical results is found to be in the range of 0.75- 11.23 % and 0.84 - 1.26% in case of standard sand and red soil, respectively. While a close agreement is observed in most of the breakthrough curves obtained experimentally and numerically, good agreement is seen in either result in one case.

• Elastomers and Composites
• /
• v.35 no.1
• /
• pp.38-45
• /
• 2000

Influence of rubber composition on migration of antiozonants to the surface in ternary rubber-based vulcanizates composed of natural rubber (NR) styrene-butadiene rubber (SBR), and butadiene rubber (BR) was studied. Of the three rubbers, contents of two rudders were same and only the other one content was different (variable rubber) IPPD and HPPD were employed as antiozonants. Migration experiments were performed at $60^{\circ}C$ for 21 days and outdoors for 4 months. Migration rates of the antiozonants increase by increasing the content ratio of the variable rubber in the vulcanizares from NR/SBR/BR=1/1/0.2 to 1/1/1 and then decrease with an increase of the content ratio of the variable rudder from 1/1/1 to 1/1/5. Migration behaviors of the antiozonants in the ternary rudder-based vulcanizates depending on the rubber composition were explained by the intermolecular interactions between rubber and antiozonant, by the solubility difference of the antiozonants for the rubbers, and by the interface formed between dissimilar rubbers in the triblends.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.4
• /
• pp.314-327
• /
• 1997

A 2-dimensional soil water flow model was developed to describe the migration of soil moisture in drip-irrigated root zone employing cylindrical coordinate system. Several natural phenomena were incorporated into the model such as transpiration, various types of evaporation, and ponding due to the increase in irrigation rate. Model was solved numerically by finite difference method. The model was verified in several ways leading to the conclusion that it can describe the soil moisture migration in drip-irrigated root zone fairly well. From sensitivity analysis, vertical migration of soil moisture was found to move faster than the horizontal one, which indicates the vertical location just under the dripping point are adequate for measuring points of soil moisture. The pot shape of soil moisture in irrigated zone was proved to be caused by evaporation at the soil surface. Also, it was found that the hydraulic conductivity has greatly influential to the soil moisture migration, and that the soil moisture continues to migrate vertically after irrigation stops.

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.349-358
• /
• 2010

For imaging complex subsurface structures such as salt dome, faults, thrust belt, and folds, seismic prestack reverse-time migration in depth domain is widely used, which is performed by the cross-correlation of shot-domain wavefield extrapolation with receiver-domain wavefield extrapolation. We apply the prestack reverse-time migration, which had been developed at KIGAM, to the seismic field data set of Block 5 in Jeju basin of Korea continental shelf in order to improve subsurface syncline stratigraphy image of the deep structures under the shot point 8km at the surface. We performed basic data processing for improving S/N ratio in the shot gathers, and constructed a velocity model from stack velocity which was calculated by the iterative velocity spectrum. The syncline structure of the stack image appears as disconnected interfaces due to the diffractions, but the result of the prestack migration shows that the syncline image is improved as seismic energy is concentrated on the geological interfaces.