• Journal of the Korean Ceramic Society
• /
• v.27 no.6
• /
• pp.755-762
• /
• 1990

The tungsten paste was printed on the surface of 92% alumina sheet which was made by type casting process. The printed tungsten was bonded on the Al2O3 by co-firing in reducing atmosphere. During the co-firing, the binder burn-out was easier in wet H2 atmosphere than in dry H2, which affected sintered density. In practically, the use of wet H2 above 100$0^{\circ}C$ was beneficial for density of alumina and bond strength. This phenomena occured more distinctly when atmosphere varied from dry H2 to wet H2 than varied dew point in wet H2. In wet H2, the improvement in bonding strength can be attributed to good glass migration into the metal layer due to inhibition of the tungsten particle growth, with increase of alumina density, at the temperatrue higher than 100$0^{\circ}C$.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.305-307
• /
• 2016

We calculated Li ion migration energy barrier, applying three different models on Li ion insertion into $TiO_2$ nanolayers to elucidate the previously reported high rate of charge-discharge. With the existence of additional Li ion on the surface of $TiO_2$ structure, spontaneous insertion of Li ion into the second layer from the first layer was observed. Using this result, we showed the intrinsic property of $TiO_2$ structure and it has a contribution to the reported performance. In the end, we give a suggestion on the fabrication of $TiO_2-Graphene$ hybrid structure for Li ion battery electrode.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.10
• /
• pp.1082-1085
• /
• 1997

The Near-Edge X-ray Absorption Fine Structure (NEXAFS) technique and Differential Scanning Calorimetry (DSC) were utilized to investigate the reaction of CH4 and O2 on the MoO3/SiO2 catalyst. The NEXAFS results showed that the stoichiometry of the molybdenum oxide catalyst supported on silica was MoO3. MoO3 was reduced to MoO2 when the catalyst was exposed to CH4 at 773 K. NEXAFS results confirm that lattice oxygen is directly related to the process of CH4 oxidation which takes place on the surface of MoO3/SiO2 catalysts. DSC results show that the structure of MoO3 changes around 573 K and this structural change seems to improve the migration of oxygen in the lattice.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.527-536
• /
• 1996

The patterns of diel horizontal migration (DHM) of 7 copepod species are compared as part of a general investigation of the zooplankton adaptations to the surf zone habitats. In a sandy shore surf zone of Yongil Bay, 3 sites such as the bottom and surface of 1 m water depth and water's edge are sampled with a sledge net(n=108). The surf zone copepod assemblage is dominated by 7 species; Acartia hudsonica, Fseudodiaptomus marinus, Paracalanus indicus, Calanus sinicus, Oithona similis, Sinocalanus tenellus and Labidocera bipinnata. Threefold variations in copepod abundance are observed within a diel cycle. Abundances of 7 dominant species and total copepods captured in the surface exhibit significant diel differences, but those taken in the bottom are not significantly affected by diel period. It is shown that about $90\%$ of the surf zone copepods performed DHM. The nocturnal high densities of copepods occurred for a neap tide when the offshore winds prevailed, suggesting the animals' ability for horizontal orientation and an active locomotion without invoking passive transportation by currents. Photoreactive behavior of copepods triggered by relative changes in light intensity may be a primary factor inducing DHM by aggregating in the surf zone during the night and spreading out at day; then copepods may reduce encounters with visual predators. In A. hudsonica, ontogenetic variations in timings of DHM are evident. Such variations are likely to minimize intraspecific competition for diets. Data on shoreward migration of copepods indicate that A. hudsonica, P. indicus, O. similis and S. tenellus can maintain swimming velocities of about $20m\;h^{-1}$ for durations of more than an hour. Our observations of strong diel difference in abundances point out the need for both day and night samplings in surf zone habitats, if the importance of these habitats to planktonic copepods are to be fully understood.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.1033-1037
• /
• 1997

The occurrence of mold growth due to moisture migration in a composite chocolate product filled with marshmallow during storage was investigated. The correlation between water activities and water contents of dark chocolate coating and filling marshmallow at $25^{\circ}C$ was well applied to Kuhn's equation. The marshmallow was found to be more hydrogroscopic than the chocolate. Since the moisture transferred from marshmallow to chocolate, the water activity of marshmallow decreased from 0.88 to 0.80 and that of chocolate increased from 0.22 to 0.76 at $25^{\circ}C$ for 30 days. This water activity, 0.76, can allow mold growth. A mold was isolated on the surface of a composite chocolate product at $25^{\circ}C$after 3 months and then was identified as Aspergillus repens. Growth experiments at varied water activities with A. repens were performed. When the water activity in a chocolate solid medium increased from 0.73 to 0.93, the occurrence time of mold growth decreased from 62 to 15 days. These results suggested that the occurrence of mold growth was due to the increased water activity of the chocolate resulting from the moisture transfer from filling marshmallow dark to chocolate coating.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.340-345
• /
• 2010

Purpose: Recently, bioceramics have become popular as a substitute graft material for reconstruction of bony defect after trauma or tumor surgery. Among the bioceramic materials, hydroxyapatite (HA) is favored due to its biocompatibility. HA scaffold is composed of the interconnected reticular framework, macropores and micropores. Macropores play an important role in cell migration, nutrients supply and vascular ingrowth. On the other hand, a number of micropores less than $10{\mu}m$ form an irregular surface on HA scaffolds, which prevents the osteoblast from adhering and proliferating on the surface of HA scaffold. Methods: In this study, three different groups were designed for comparison. In the first group (group A), conventional method was used, in which HA pellet was applied without surface pretreatment. The second group (group B) was given a HA pellet that has been coated with crystalline HA solution prior to application. In the third group (group C), the same method was used as the second group, where the pretreated HA pellet was heated ($1250^{\circ}C$, 1 hour) before application. Osteoblast-like cells ($2{\times}10^4$/mL) were scattered onto every pellet, then they were incubated in 5% $CO_2$ incubator at $37^{\circ}C$ for twelve days. During the first three days, osteoblast cells were counted using the hemocytometer daily. ALP activity was measured on the 3, 6, 9 and 12 culture days using the spectrophotometer. Results: Under SEM, group A showed a surface with numerous micropores, and group B revealed more rough crystal surface. Group C revealed a fused crystal appearance and flattened smooth surface. In proliferation and ALP activity of osteoblast cells, group C showed better results compared to group B. Group A which lacks pretreatment of the surface showed less osteoblast proliferation and ALP activity than group C, but showed better results than group B. Conclusion: We found that crystallized HA with heat treatment method enhances the osteoblasts proliferation and differentiation on the surface of HA pellets.

• Economic and Environmental Geology
• /
• v.34 no.3
• /
• pp.271-281
• /
• 2001

The characteristics of the heavy metal contamination in the soils affected by the tailings of the Palbong mine have been studied. The soils in the studied area consist mostly of loam by the particle size analysis, but a little of it, located near the stream, consist of loamy sand to sandy loam, finally to loam downward. The organic contents of soils are significantly low aoom 2 percent and the pH is in acidic ranging 6.0 $\pm$ 0.1. The samples of the parent rocks, the normal soils, the tailings and the channel deposits from the studied area were chemically analysed. From the result, the heavy metal concenlration of the soils is a little Jow compared with that of the parent rocks, shows the hydrologic process of the surface and the groundwater. The contamination of the tailings from the ore mining are high in lead, copper and arsenic. In the channel deposits the concenlrations of lead and copper are abnormally high but that of arsenic is uniquely low. And most of heavy metal contamination are decreased with the distance from the mine. It is caused by the properties of the surface and the ground water during the process of the heavy metal migration. The correlation-coefficient between sand and silt contents and the concentrations of Cd, Cu and Pb are significant but the amounts of As and Hg are increased with the clay contents. The dispersion of the heavy metals with the distance shows that the concentrations of them in the soils sampled at distance of 100 m to 200 m along the stream started near the Palbong mine are extremely high compared with those from other distances. These discrepancies are significant in Cd, Cu, Pb and Hg, but low in As. All the samples contain below detection limit of Cr+6 In the present stream water the concentrations of the heavy metals are not detected. So, it is interpreted that the concentrations in the soils are caused by the activities of the mining during the operation and have been continued by the dispersion from the tailings since after the closure of the mining, especially by the surface and ground water. The concentrations are diminished with the distance from the mining site, but in the interval of 800-2000 m increases abruptly. In the soil samples counted on the dispersion direction by wind, the lowering of the concentration is relatively uniform with the distance from the mining site. So, the rapid increase of the heavy metal concentrations is presumed to have been caused by the ground-water movement. In the migration of the heavy metals, the groundwater conditions, such as pH, Eh, the contents of colloidal particles, and Mn and Fe oxides are closely involveo. Integrating with these factors, it is interpreted that the groundwater conditions which have caused the heavy metal contamination of the studied area are those that the pH is about 3 in oxidized conditions, the contents of the colloidal particles are low, and Mn and Fe oxides are not involved in the migration of the heavy metals. Meanwhile, the vegetables growing on the soils in the studied area are not affected by the contamination of the heavy metals.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.148-154
• /
• 2009

With respect to the durability of large scale ($150cm^2$) membrane electrode assembly (MEA) of direct methanol fuel cell (DMFC), degradation phenomena at cathode is monitored and analyzed according to the position on the cathode surface. After constant current mode operation of large scale MEA for 500 hr, the MEA is divided into three parts along the cathode channel; (close to) inlet, middle, and (close to) outlet. The performance of each MEA is tested and it is revealed that the MEA from the cathode outlet of large MEA shows the worst performance. This is due to the catalyst degradation and GDL delamination caused by flooding at cathode outlet of large MEA during the 500 hr operation. Particularly on the catalyst degradation, the loss of electrochemically active surface area (ECSA) of catalyst gets worse along the cathode channel from inlet to outlet, of which the reason is believed to be loss of catalysts by dissolution and migration rather than their agglomeration. The extent of loss in the performance and catalyst degradation has strong relation to the cathode flooding and it is required to develop proper water management techniques and separator channel design to control the flooding.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.5
• /
• pp.749-759
• /
• 1998

Distribution of zooplankton abundance was studied in the front zone in the East Sea in November, 1996, Averaged total abundance in the front zone was less than that in the nearby cold surface water areas but more than that in the nearby warm surface water areas. The number of taxa was the greatest in the upper layer of mixing. Abundance and the number of tun in the front zone were contributed by the cold water and the warm water, respectively. Inspite of the differences in sampling time (day vs night), the species composition and abundance distribution were similar at two sites within cold or warm water area, However, they were quite different at two sites in the front zone although the sampling time of the day was the same. from this, the history of mixing was believed to be the most important factor for the species composition and abundance distribution in the front zone. Zooplankton distribution in the study area was mainly controlled by the dominant cold water Copepod Species Metridia paoifica, the only taxon that showed significant diet vertical migration. Most other taxa showed no significant diel vortical migration, Seawater temperature also affected zooplankton distribution. Positive correlations in the warm area, weak negative correlations in the cold water area, and no significant correlation in the front zone were obtained in general between the seawater temperature and the abundances of the major taxa.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.207-215
• /
• 2020

Vivianite (Fe₃²⁺(PO₄)2·8H₂O) and green rust ([Fe₄²⁺Fe₂³⁺(OH)^-₁₂][SO₄^2-·2H₂O]^2-), ferrous containing minerals, could remove aqueous U(VI) in 5 min. and the efficiencies of green rust were roughly 2 times higher than that of vivianite. The zeta potential measurement results implies that the better performance of green rust might be attributed to the favorable surface charge toward uranyl phosphate species. The removal behaviors of the minerals were well fitted by pseudo-second order kinetic model (R² > 0.990) indicating the dominant removal process was chemical adsorption. Effects of Ca²⁺ and CO₃^2- at pH 7 were examined in terms of removal kinetic and capacity. The kinetic constants of aqueous U(VI) were 8 and 13 times lower (0.492 × 10^-3 g/(mg·min); 0.305 × 10^-3 g/(mg·min)) compared to the value in the absence of the ions. The thermodynamic equilibrium calculation showed that the stable uranyl species (uranyl tri-carbonate) were newly formed at the condition. Surface investigation on the reacted mineral with uranyl phosphates species were carried out by XPS. Ferrous iron and U(VI) on the green rust surface were completely oxidized and reduced into Fe(III) and U(IV) after 7 d. It suggests that the ferrous minerals can retard U(VI) migration in phosphate-rich groundwater through the adsorption and subsequent reduction processes.