연동비닐하우스의 기초는 주로 수직하중을 고려하여 소형의 얕은 콘크리트 기초로 설계 시공된다. 그러나 최근 강풍과 같은 이상기후로 인하여 기초에 설계 강도 이상의 수평하중 및 인발하중이 작용하여 온실기초의 안전성 문제를 야기하고 있다. 비닐하우스 기초의 안전성을 합리적으로 평가하기 위해 지반-기초의 상호작용에 의해 발현되는 회전 및 인발강성을 평가하여야 하며 이는 상부 구조재의 안전성에도 영향을 미치는 요소가 된다. 본 연구에서는 내재해형 연동비닐하우스 규격 기초를 형상에 따라 분류하여 3개의 대표 기초 유형을 선정하고, 기초 유형별 수평하중 가력실험 및 이론 해석을 수행하였다. 실험 및 해석의 비교 분석 결과, 기초-지반 접촉면의 성질과 지반의 역학적 성질이 동일할 경우 기초는 지반과의 접촉면적비에 따라 회전저항성능에 차이를 보이는 것으로 나타났다.
The pupose of this study was to compare the fracture strength of five kinds of all-ceramic crowns(Vintage, Dicor Empress-staining, Empress-layering, In-Ceram) luted with glass ionomer cerment and composite resin cement and to evaluate the effect of cements on the fracture stregth of all ceramic crowns. Five groups of twelve uniform sized all-ceramic crown specimens were fabricated. Six specimens of each group were cemented with glass ionomer cement(Fuji G.I. Cement) and the remaining six specimens of each group were etched, silane-treated, and cemented with composite resin cement(Bistite resin cement). The crowns were stored in water$(37^{\circ}C)$ for 1 day prior to loading in an Instron, using a steel ball(diameter 4mm) at a crosshead speed of 0.5mm/min. The crowns were angled $30^{\circ}$, so the steel ball contacted with the crowns 2mm lingual from the mid-incisal edge. The results obtained were summarized as follows ; 1. With G.I. cement, mean fracture load(Kg) Were : Intage : $18.33{\pm}1.47$ ; Empress-staining : $23.92{\pm}6.67$ ; Dicor : $24.0{\pm}5.81$ ; Empress-layering : $26.92{\pm}2.80$ ; In-Ceram : $51.58{\pm}6.87$ ; ANOVA revealed a significant difference existed(p<0.05) between the group A(Vintage, Dicor, Empress-staining, Empress-layering) and group B(In-Ceram). 2. With Resin cement, mean fracture load(Kg) were : Intage : $22.75{\pm}4.97$ ; Dicor : $42.75{\pm}7.07$ ; Empress-staining : $44.08{\pm}7.99$ ; Empresslayering : $50.42{\pm}5.43$ ; In-Ceram : $52.58{\pm}6.51$ ; ANOVA revealed a significatnt difference existed(p<0.05) between the group A(Vintage) and B(Dicor, Empress-staining Empress-alyering, In-Ceram). 3. Resin cement significantly increased the fracture strength of the all-ceramic crowns for Dicor(156%), Empress-staining(185%), Empress-alyering(187%)(p<0.05); but did not increase the fracture strength of Vintage(128%) and In-Ceram(101%)(p>0.05). 4. Majority of the all-ceramic crowns show a wedge fracture extending through proximal surfaces to an apex, usually apical third(with G.I. cement) or middle third(with Resin cement) of the facial surface.
Purpose: The purpose of this study is to find the effect of rare earth magnet's magnetic field of to the osteoblast around the implant by the means of observation number, and distribution around the implant which is connected to the permanent magnet but not, counted and compared by the number of cells attached to the surface of the implant. Material and method: The permanent magnets, made in the healing cap form, were connected to the implant future, and placed on the culture plate, The osteoblast-like cell: MC3T3-E1 were used for cell culture. As the control group, the implant were connected to normal healing cap, and cultured in the same conditions. 48 hours later, using inverted microscope, the number and distribution of osteoblast around the implant were observed, and 72 hours later, the number of the cells attached to the implant were counted. Results: As a result, the implant connected to the permanent magnet had proved to have a more concentrated cell distribution rate than the control group. The implant connected to the permanent magnet, neck area : which has about 10 gauss magnetic force, had more cells than apex area. The implant connected to the permanent magnet had proven to attach to the osteoblast more productively than control group's implant. Conclusions: This research showed that the magnetic field of the permanent magnet affected the distribution and growth rate of the osteoblast around the implant. In order to support this study, it also had need to monitor the progress of the permanent magnet specifically shown on the neck area, which has10 gauss magnetic force. So after additional research on the distribution and attachment of the cells, and further more, on bone formation, it will be concluded that the clinical applications ,such as immediate loading of implant treatment are possible.
본 연구에서는 과거 2년에 걸쳐 강우유출수 처리목적의 인공습지로부터 수집된 수질자료를 바탕으로 지금까지 국외에서 개발된 다양한 형태의 영양소 모델의 적용성을 평가하였다. 검토결과 질소제거에 가장 큰 영향을 미치는 요인은 수온과 수리학적 부하율(HLR) 이었는데 습지의 수표면적이 습지의 용량에 비해 더 중요하게 작용했음을 시사해주고 있다. 질소제거는 미국 WEF(water environment federation)가 개발한 준경험적인 형태의 모델이 적합한 것으로 밝혀졌다. 한편 인 제거 모델은 수온과 제거속도상수의 관계를 Power Model로 보고 모의했을 때 실측치와 가장 가깝게 계산치를 산출할 수 있었으며 실측치의 증가와 감소경향을 비교적 정확하게 모의할 수 있었다($R^2=0.79$). 그러나 모든 시도에서 수온이 특정온도 이하로 감소했을 때 가장 심한 오차를 발생하여 취약한 예측성능을 보였다. 한편 인공습지에서 질소제거특성을 검토한 결과 질산화에 비하여 탈질이 저조한 것으로 나타났는데 그 이유는 탄소원의 부족과 높은 용존산소 농도로 인하여 Anoxic 조건의 미형성 때문으로 분석되었다. 질소제거 향상방안으로 용존산소의 제어와 탄소원의 확보차원에서 햇빛에 노출된 개방수역과 햇빛에 노출된 식생구역, 그리고 습지의 기능적 측면을 고려한 구성요소의 배분 및 부유 수생식물 및 무기성 여재를 이용하는 방안을 논의하였다.
농업비점오염에 의한 수질문제 해결을 위하여 인공습지 조성이 늘어나고 있으나 긴 체류시간과 긴 일조량 등으로 인하여 습지 내 조류 발생 등의 문제가 지속적으로 발생하고 있다. 본 연구는 농업 비점오염원관리를 위하여 조성된 인공습지의 효율을 평가하여 자연기반 능력이 향상된 고도화된 인공습지 개선방안을 제시하고자 수행되었다. 인공습지의 성능평가는 구성성분(물, 퇴적물 및 식물)의 모니터링을 통해 구성성분이 시스템의 처리 성능에 주는 기여도 평가를 통해 수행되었다. 건기시에는 식물성 플랑크톤의 과다성장, 긴 체류시간 및 일조량 과다로 습지내 탁도 및 미립자 농도가 각각 80~197 % 및 10~87 %정도 증가하는 것으로 나타났다. 그러나 강우시에는 습지내 적절한 물 순환과 지속적인 물 흐름으로 미립자, 유기물 및 영양분의 농도가 43 ~ 70 %, 22 ~ 49 %, 15 ~ 69 % 정도 감소하는 것으로 나타났다. 이러한 연구결과로 볼 때 인공습지가 가진 문제해결을 위해서는 자연습지가 가진 안정적 물 흐름이 필요하다는 것을 알수 있다. 그러나 일정수심을 유지하도록 되어있는 인공습지 설계기준은 건기와 강우기가 뚜렷하게 나타나는 한국적 기후상황에 타당하지 않다. 따라서 본 연구에서는 인공습지가 가진 문제를 해결하고 홍수관리, 수질 관리 및 환경 기능을 지속적으로 유지할 수 있도록 다기능 설계기법을 개념화하였다.
이 연구는 화재시 수직화염을 적절하게 제어할 수 있는 차양식 방화루버의 실용화 및 설계기법 개발에 관한 일련의 연구로써 구조물에서 화염 억제 특성을 해석할 수 있는 기법을 제시하고 실험을 통해 해석기법의 검증과 차양식 방화루버의 성능을 검증하기 위한 것이다. 실제 방화루버의 수직화염 억제뿐만 아니라 열전달 특성을 정량적으로 분석하기 위하여 2개의 실대형 실험을 계획하였다. 실험체는 전체 $3m{\times}3m$의 시험체 중 $850mm{\times}1,800mm$의 개구부를 두고 상부에 실험용 방화루버 ($900mm{\times}900mm{\times}175mm$)를 설치하였으며, 건설기술연구원에서 ISO834 화재하중 규모로 1시간 실험을 실시하였다. 실험변수는 방화루버의 두께로 1.5mm, 2.0mm로 설정하였다. 실험결과 차양용 방화루버는 상부의 수열온도가 현저하게 감소하는 것을 확인하였다. 특히 화재하중 가력 초기에서 6분 (로내 온도 $600^{\circ}C$)에서 우수한 차열성능을 나타냈다. ISO 834 화재하중 60분에서 방화루버 상부 500mm, 800mm 위치의 수열온도는 루버 두께에 상관 없이 각각 로내 온도 대비 11, 10%로 나타났다. 이를 통해 화재발생 후 상부층으로 화염 전파 억제 및 온도 전달 제어 측면에서 차양용 방화루버는 유효한 방안 중 하나라는 것을 알 수 있었다.
Liposomes as one of the efficient drug carriers have some shortcomings such as their short circulation time, fast clearance from human body by reticuloendothelial system (RES) and limited intracellular uptake to target cell. In this study, polyethylenglycol (PEG)-incorporated cationic liposomes were prepared by ionic complexation of positively charged liposomes with carboxylated polyethyleneglycol (mPEG-COOH). The cationic liposomes had approximately $98.6{\pm}1.0nm$ of mean particle diameter and $42.8{\pm}0.8mV$ of zeta potential value. The PEG-incorporated cationic liposomes had $110.1{\pm}1.2nm$ of mean particle diameter with an increase of about 10 nm compared to the cationic liposomes. Zeta potential value of them was $12.9{\pm}0.6mV$ indicating 30mV decrease of cationic charge compared to the cationic liposomes. The amount of PEG which was incorporated onto the cationic liposomes was assayed by using picrate assay method and the incorporation efficiency was $58.4{\pm}1.1%$. Loading efficiency of model drug, doxorubicin, into cationic liposomes or PEG-incorporated cationic liposomes was about $96.0{\pm}0.7%$. Results of intracellular uptake which were evaluated by flow cytometry analysis of doxorubicin loaded liposomes showed that intracellular uptake of PEG-incorporated cationic liposomes was higher than the cationic liposomes or DSPE-mPEG liposomes. In addition, cytotoxicity of PEG-incorporated cationic liposomes was comparable to cationic liposomes. Consequently, the PEG-incorporated cationic liposomes of which surface was incorporated with PEG by ionic complex may be applicable as anticancer drug carriers that can increase therapeutic efficacy.
본 연구는 시화방조제 건설로 인하여 외해수와의 순환이 차단된 후 유기물오염과 담수화가 진행된 시화호 내에서 방조제 완공 전과 후의 저서동물 군집을 비교함으로써 시화호 내에서 저서동물군집이 어떤 천이과정을 거쳤는지, 그리고 군집의 천이를 일으킨 주된 요인은 무었인지, 또한 방조제 건설 전의 시화지구 해역 저서동물 군집과 건설 후 방조제 외곽해역의 저서동물 군집을 비교함으로써 방조제 건설이 주변 해역에 미친 영향을 파악하는데 그 목적이 있다. 방조제 완공 후 시화호 내에서의 저서동물 군집의 천이는 두 방향으로 진행되었다. 첫번째는 유기물 유입의 증가에 따른 저층수의 무산소 및 빈산소 환경의 형성으로 인해 저서동물이 완전히 사라진 중오염역 (Grossly Polluted Zone)의 출현이다. 두번째는 저서동물 군집이 계속 유지되고 있는 방조제 근처의 낮은 수심에서의 기회종으로 구성된 오염역 (Polluted Zone)으로의 저서동물 군집의 천이이다. 이런 군집의 천이는 방조제의 배수갑문을 통한 빈번한 해수 유입으로 인하여 저층수의 염분도와 용존산소량의 변화에 크게 영향을 받는 것으로 나타났다. 또한 시화방조제 건설은 주변 외곽지역의 저서동물 군집에도 영향을 미쳐 건설 전보다 후에 평균 출현종수는 2.6배, 밀도는 7배나 증가하는 전형적인 부영양화의 특징적 현상을 보임으로서 방조제 외곽해역의 저서동물 군집 또한 불안정한 상태로 변하고 있음을 알 수 있다.
본 연구에서는 다양한 pH 조건에서 활성탄에 Fe(III)를 첨착시킨 Fe-첨착활성탄(Fe-AC)을 제조하였으며, 제조한 Fe-AC가 여과재질로서의 안정성 유무를 파악하기 위하여 내산성 실험을 수행하였다. 또한 Fe-AC의 중금속 제거능을 파악하기 위하여 회분식 실험을 수행하였다. 흡착제의 안정성 실험결과 모든 pH 조건에서 시간이 지날수록 철의 용출량은 증가하였지만, 용액의 pH가 높아질수록 철의 용출량이 감소하는 경향을 보였다. 용액의 pH를 2로 고정했을 경우 시간경과에 따라 철의 용출량이 점차 증가하여 12시간 후에는 Fe-AC에 함유된 총 철 함량의 13%가 용출되었으나, pH 3 이상에서 철의 용출량은 급격히 줄어들어서 무시할 수 있는 것으로 나타났다. 회분식 실험결과 Fe-AC에 의한 Cu(II) 제거는 흡착질의 농도가 감소하고 용액의 pH가 증가할수록 Cu(II)의 제거율은 증가하는 경향을 보였다. 모델링에 의한 흡착결과 예측은 이중확산층 이론에 의한 inner-sphere type의 표면착물화를 고려하여 MINTEQA2 프로그램을 사용하여 실시하였다.
기술과 품질의 차이가 하루가 다르게 좁혀지고 있는 현대의 자유시장경제하에서 제품의 차별화를 위한 마케팅 전략은 더욱더 격화되는 디자인 경쟁에 의해 좌우되고 있다. 그 중에서도 제품의 외형을 통해 소비자에게 시각적으로 닿게 되는 패키지디자인은 가격이나 기능에 앞서 브랜드이미지에 영향을 미치는 직접적 커뮤니케이션이다. 패키지디자인은 제품을 포장, 운반, 보관하고 적재하는 기본 기능만이 아니라 효과적인 비주얼 이미지로 소구력을 높여 브랜드이미지를 각인시키고 구매결정을 이끈다. 최근의 패키지디자인은 캐릭터를 적극 활용하고 있는데 단지 캐릭터의 이미지만을 사용하는 것이 아니라 캐릭터의 형태가 패키지의 물적 구조와 융합된 입체적인 디자인으로 2차적 재미와 효과를 주고 있다. 이렇게 캐릭터를 잘 활용한 패키지디자인은 그 자체로 강력한 마케팅 수단이자 가치 있는 디자인 자산이며, 캐릭터를 활용하는 방식에 따라 그 부가가치는 더욱 증대될 수 있다. 위트 있는 아이디어로 판매 뿐 아니라 브랜드이미지 향상에 기여하는 캐릭터패키지는 대기업 뿐 아니라 다양한 제품군에서 효과적으로 사용할 수 있는 마케팅수단이다. 특히 지역단위를 넘어선 판매와 홍보에 절실한 지자체별 관광상품에 잘 활용한다면 단지 구매동기만을 유발시킬 뿐 아니라 패키지 자체가 관광자원이 되는 일석이조의 효과를 누릴 수 있다. 본 연구는 그 실례로 전북 전주의 한 지역브랜드를 마케팅하는 수단으로써 캐릭터패키지를 제안하여, 자체캐릭터를 개발하고 이를 패키지의 입체적 형태로 디자인하는 캐릭터패키지를 기획, 제작하였다. 그리고 이런 일련의 과정을 통해, 기존 브랜드의 이미지를 재정립하거나 강화하기 위한 브랜드마케팅 전략으로서의 패키지디자인을 제시하고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.