• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.81-91
• /
• 1995

A miniature size electrostatic induction motor has been fabricated and studied with emphasis on the role of the surface resistivity, the relative dielectric constant of the rotor surface materials and the rotor liner materials, which control the charge induction and relaxation on the rotor surface and the field intensity between the rotor and the stator. It is found that the higher resitivity and/or the higher relative dielectric constant, concurrently the longer relaxation time constant of the rotor surface materials make the motor speed get higher speed. In case of discrete coated rotor surface it is found that the motor speed was increased logarithmically as narrow as width of the discrete coated Ti. And the degree of width of discrete coated Ti to the axial direction of the rotor was $60^{\circ}$ and $150^{\circ}$, the motor has got a 125% higher than that at the degree of $0^{\circ}$.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.58-68
• /
• 1994

A miniature size electrostatic induction motor has been fabricated and studied parameters Influencing dominantly to the motor speed, such as a voltage and frequency of the 3 phase ac power source supplied to the stator of fabricated motor, the surface resistivity and relative dielectric constant of the rotor surface materials and the concurrently calculated relaxation time constants. It is found that the higher resitivity and/or the higher relative dielectric constant, concurrently the longer relaxation time constant of the rotor surface materials make the motor speed get higher speed. In case of discrete coated rotor surface it is found that the motor speed was increased logarithmically as narrow as width of the discrete coated Ti. And the degree of width of discrete coated Ti to the axial direction of the rotor was 60$^{\circ}$ and 150$^{\circ}$, the motor has got a 125% higher than that at the degree of 0$^{\circ}$.

• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.58-66
• /
• 2011

In this paper, the starting torque and efficiency characteristics of the induction motor (IM) for the electric vehicle (EV) are improved by changing the slot shapes of squirrel cage. The initial model of the induction motor is designed by the loading distribution method (LDM), and then the rotor with squirrel cage of NEMA class A is selected to optimize the slot shape by response surface method(RSM). The design variables of rotor slot shape are obtained by the RSM. Starting torque and efficiency were calculated by the equivalent circuit method. As a result, starting torque and efficiency of the optimized model shows good performance through whole-speed range.

• 대한기계학회논문집B
• /
• 제21권3호
• /
• pp.457-472
• /
• 1997

We studied the temperature distribution and heat transfer characteristics of TEFC induction motor with thermal network program for more efficient design and better cooling performance of it. We knew the characteristics and the windage loss of outer cooling fan from fan test experiments. Frame axial and peripheral heat transfer coefficients and endwinding heat transfer coefficient were measured by various model experiments and then, compared with other experimental results. Frame was the main heat transfer surface, load-side and fan-side surface were not thermally symmetric from the heat flux distribution analysis. Steady and unsteady temperature distributions were measured by real motor experiments. From the results, we knew that rotor surface temperature was higher than coil temperature and the hottest spot in the coil was loadside endwinding outside surface. We compared the simulation results with those of real motor test and the two results showed a good agreement.

• 센서학회지
• /
• 제2권1호
• /
• pp.65-74
• /
• 1993

본(本) 연구(硏究)에서는 소형(小型) 정전유도형(靜電誘導型) 모터를 제작하고 이 모터에 인가하는 3상(相) 교류전압(交流電壓) 및 주파수(周波數)를 가변(可變)하였을 때의 회전자(回轉字)의 회전속도(回轉速度)의 특성을 실험적으로 검토하였다. 또한 정전유도형(靜電誘導型) 모터의 작동기구상(作動機構上) 회전자(回轉字) 표층물질(表層物質) 및 내층물질(內層物質)의 표면저항율(表面抵抗率), 비유전율(比誘電率) 및 전하완화시정수(電荷緩和時定數)를 변화시켜 회전자(回轉字) 및 고정자(固定子) 사이의 전계강도(電界强度) 및 회전자(回轉字) 표면물질상(表面物質上)의 표면유기전하(表面誘起電荷)의 분포(分布) 및 유기속도(誘起速度)를 변화시킴으로서 소형(小型) 정전유도형(靜電誘導型) 모터의 회전자의 회전속도에 미치는 영향을 검토하였다. 실험(實驗) 결과(結果), 회전자(回轉字) 표층물질(表層物質)의 비유전율(比誘電率), 표면저항률(表面抵抗率) 및 전하완화시정수(電荷緩和時定數) 및 내층물질(內層物質)의 비저항율(比抵抗率)이 모터의 회전속도(回轉速度)에 매우 큰 영향을 미침이 확인되었다. 또한 모터에 인가하는 3상(相) 전원(電源)의 전압(電壓) 및 주파수(周波數)도 모터의 회전(回轉)에 매우 큰 영향을 주며, 회전속도(回轉速度)는 인가전압(印加電壓) 및 주파수(周波數)에 일차(一次) 비례(比例)하여 증가함을 보여주었다. 회전자의 표층물질(表層物質)이 $BaTiO_{3}$ 80% 내층물질(內層物質)이 Cu 일때 무부하(無負荷) 최대속도(最大速度)는 4.5 kV, 220 Hz에서 5500 rpm이 얻어졌다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.699-702
• /
• 1992

A miniature size electrostatic induction motor have been constructed and studied by applying a three phase ac power source with a maximum voltage of 5 KV and a variable frequency ranged 0.0 - 150 Hz. A maximum no load speed of the motor tested was about 7600 RPM at the applied voltage of 4330 volt and the frequency of 130 Hz for the case of the rotor surface material of polyprophylene sheet screen-printed $TiO_2$ powder on it. It is found that there are 3 different regions of the motor operation, a rotor stop region, a stable operation region and a high speed abnormal region. And it is also found that the motor speed is influenced greatly by the charge relaxation time constant of the rotor surface materials, which however was changed by the means of vapour-deposited Ti or Ni and screen-printed $TiO_2$ powder on the surface of the rotor material, polyprophylene.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.726-732
• /
• 2009

In many industries, the linear motor replaces the existing framework for linear transportation. Similar to other conventional motors, it is important to minimize the ripple of thrust and to maximize the thrust force of the linear motor. Because the two objectives are associated to each other, the multi-objective design process is necessary considering all objectives. This paper intends to optimize geometric parameters of the linear motor with two design objectives using design of experiments and sequential response surface method.

• 한국정밀공학회지
• /
• 제32권2호
• /
• pp.141-147
• /
• 2015

This paper deals with thermal characteristic analysis of induction motors for machine tool spindle for motion error prediction. Firstly, the inverse design of general induction motors for machine tool spindle has been performed by design principles. Characteristics considering VVVF inverter of induction motors were analyzed. Secondary, power loss and thermal characteristics of induction motors analyzed by equivalent thermal resistance model from Motor-CAD S/W. To develop a second-order fitted power-loss distribution model for the constant-torque operating range of the induction motor, we employed the design of experiment and response surface methodology techniques. Finally, the analysis results were experimentally verified, and the validity of the proposed analysis method was confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.503-505
• /
• 1998

The position control of an induction motor using Feedforward Neural Networks(FNNs) was studied in this paper. A teaching signal was obtained from sliding surface without a particular signal. And the FNNs team through the back propagation algorithm so as to reduce the error between the real position of the motor and the reference value. The structure of a controller was designed simply, for the fast calculating response which is certainly necessary for induction motor position control. And to show the superiority of this controller, 3-phase vector control induction motor whose power capacity is 2.2kw was modeled, and it was simulated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.681-683
• /
• 2003

The response surface method (RSM) became a popular meta modeling technique, but it always contains the approximation error. Instead of the conventional RSM, the moving least squares method (MLSM) was used to get more accurate models. The characteristics of a single-phase induction motor for the reciprocal compressor are analyzed by using the lumped method Program (LMP). The proposed method is applied to a single-phase induction motor for increasing the efficiency.