• Computers and Concrete
• /
• 제23권5호
• /
• pp.351-359
• /
• 2019

In this study, the calcium hydroxide, an inherent product of cement hydration, was treated using biomimetic carbonation method of incorporating stearic acid to generate the hydrophobic calcium carbonate on concrete surface. Carbonation reaction was carried out at various $CO_2$ pressure and temperatures and utilizing the Scanning Electron Microscope (SEM), chloride-ion penetration test apparatus, and compression test machine to investigate the hydrophobicity, durability, and mechanical properties of the synthesized products. Experimental results indicate that the calcium stearate may change the surface property of concrete from hydrophilicity to hydrophobicity. Increasing reaction temperature can change the particles from irregular shapes to needle-rod structures with increased shear stress and thus favorable to hydrophobicity and microhardness. The contact angle against water for the concrete surface was found to increase with increasing $CO_2$ pressure and temperature, and reached to an optimum value at around $90^{\circ}C$. The maximum static water contact angle of 128.7 degree was obtained at the $CO_2$ pressure of 2 atm and temperature of $90^{\circ}C$. It was also found that biomimetic carbonation increased the permeability, acid resistance and chloride-ion permeability of the concrete material. These unique results demonstrate that the needle-rod structures of $CaCO_3$ synthetized on concrete surface could enhance hydrophobicity, durability, and mechanical properties of concrete.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.49-56
• /
• 2018

The use of highly absorptive materials in cement-based materials is increasing for internal curing purpose. However, calculation of correct absorption capacity of such materials is not easy, which leads to change in the effective water-to-cement ratio of cement paste by either absorbing or releasing water. In this study, effective absorption capacity of a highly absorptive material was found using isothermal calorimetry. Moreover, the effect of specific surface area was investigated. It was found that the method was capable of finding effective water absorption capacity of activated carbon fiber. For the activated carbon fiber used in this research, the effect of specific surface area was negligible because the high BET surface area was due to micropores less than 1nm, which does not affect the rate of hydration curve. Thus, the effective absorption capacity of such materials can be found successfully using this method.

• Journal of the Korean Wood Science and Technology
• /
• 제12권3호
• /
• pp.25-34
• /
• 1984

This experiment was carried out to investigate the effects of monosaccharides extracted by saturated portland cement solution on the cement setting in comparision with the inhibitory index (I) of each lignocellulosic-cement system. The wood species which have been widely reforested in Korea, Populus alba-grandulosa, Larix leptolepis, Abies holophylla, Pinus koraiensis, Pinus rigida, Pinus densiflora and agricultural wastes of rice husk and rice stalk were used at this study. The wood meal, 0.50g on dry weight basis, through 0.83 mm(20 mesh) and retained on 0.35mm (40 mesh) screen was extracted by 25 ml saturated portland cement solution and the pH of saturated portland cement solution Was 12.7. To eliminate cation exsisting in the extracted solution, the cation exchange column was used (Fig. 4). Afterwards the extracted monosaccharides were reduced into alditols with sodium borohydride and analyzed by the gas-liquid chromatography for xylan, mannan, arabinan, galactan, gluean. The heat of cement hydration for lignocellulosic-cement system was measured in Dewar flask (Fig. 2). And then the inhibitory indices were calculated from maximum hydration temperature, time and maximum slops of hydration curve of ligno cellulosic-cement systems. The results obtained were as follows; (1) The inhibitory index of pines-Pinus rigida (I=29.33) and Pinus densiflora (I=35.76), were lower than that of poplar-Populus alba-glandulosa (I=41.48), and the index of Larix ieptoiepis (I=73.00) was the highest among eight lignocellulosic-cement systems, and accordingly both Pinus rigida and Pinus des(flora were seemed to be good wood species for wood-cement composite manufacture. (2) In case of Pinus rigida, the inhibitory index was 29.33 and the ratio of the hexoses to the pemoses was 6.04 and in case of Larix leptolepis, the index and the ratio were 73.00 and 35.19, respectively. Therefore the inhibitory index increased with increasing the ratios of the hexoses to the pentoses. (3) The richer amount of xylose and mannose in species caused decreasing the slops of the hydration curve of the lignocellulosic-cement system, prohahly due to the chemical adsorption of the acetyl groups in the hemicellulose on the surface of cement grains. (4) The amoun of xylose and mannose were significant to the inhibitory index of each lignocellulosic-cement system but any specific relation between the amount of glucose and inhibitory index was not found.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.287-297
• /
• 2014

최근 증가 추세에 있는 화력발전소 건설에 있어서, 터빈 기초 구조물은 규모가 매우 큰 매스콘크리트이다. 매스콘크리트의 수화열은 구조물의 품질과 공기 등에 중대한 영향을 미치는 요인 중 하나이므로, 수화열 제어를 위한 적절한 방안은 필수적이다. 이 연구에서는 국내 복합화력발전소 터빈 기초 시공에 앞서 수화열 해석을 통하여 수화열 균열 발생 가능성을 예측하고, 수화열 제어 방안으로서 콘크리트 배합 및 양생방법 변경을 제안하였다. 콘크리트 배합은 기존 1종 보통시멘트 콘크리트 배합에서 슬래그시멘트 콘크리트 배합으로 변경을 제안하였고, 기존 양생포 및 살수양생방법을 개선하기 위하여 매스콘크리트 중심부와 표면부의 온도를 모니터링하여 온도차를 일정수준 이하로 일정하게 유지시켜주는 양생자동화시스템을 적용한 양생방법을 제안하였다. 실제 시공시에는 슬래그콘크리트 배합을 사용하고, 2기의 동일한 터빈 기초 구조물에 대하여 각각 보온양생공법과 양생자동화시스템을 적용하여 양생방법에 따른 온도균열 제어효과를 비교하였으며, 2기의 매스콘크리트에서 온도, 변형률 모니터링 및 균열 조사를 통하여 수화열 제어 효과를 평가하였다.

• 한국광물학회지
• /
• 제9권1호
• /
• pp.17-25
• /
• 1996

Usual experimental adsorption isotherms as a function of relative humidity were constructed from adsorbed water contents in soils, which were kept more than 2 days in vacuum desiccators with constant humidities controlled by sulfuric acids of various concentrations. From the experimental data, the adsorption surface areas were calculated on the basis of the existing adsorption theory, such as Langmuir, BET, and Aranovich. Based on the Gibbs function describing chemical potential of perfect gas, the relative humidities in the desiccators were transformed into their chemical potentials, which were assumed to be the same as the potentials of equilibratedly adsorbed water in soils. Moreover, the water potentials were again transformed into the equivalent capillary pressures, heads of capillary rise, and equivalent radius of capillary pores, on the basis of Laplace equation for surface tension pressure of spherical bubbles in water. Adsorption quantity distributions were calculated on the profile of chemical potentials of the adsorbed water, equivalent adsorption and/or capillary pressures, and equivalent capillary radius. The suggested theories were proved through its application for the prediction of temperature rise of sulfuric acid due to hydration heat. Adsorption heat calculated on the basis of the potential difference was dependant on various factors, such as surface area, equilibrium constants in Langumuir, BET, etc.

• 공업화학
• /
• 제17권6호
• /
• pp.586-590
• /
• 2006

전기활성 고분자로서 이온성고분자-금속복합체(Ionic Polymer metal Composites, IPMC)는 화학적 환원방법으로 비교적 쉽게 제조하여 낮은 구동전압에서도 큰 변위를 낼 수 있는 유연성을 지니는 스마트 소재(soft smart material) 중의 하나이다. 제조 시의 화학적 환원방법은 용액 내에서 반응시킴으로써 결과적으로 형성되는 다공성 고분자 막의 표면의 거칠기 때문에 구동체로서의 IPMC의 동작특성에 결함을 줄 수 있다. 따라서 본 연구에서는 IPMC의 표면의 거칠기에 대한 구동 특성을 비교하고 표면 조도를 향상시키는 방안으로 표면 이온빔 보조 증착법으로 표면을 개질하였다. 이러한 표면 개질 효과로 인해 IPMC 전극의 표면 저항을 낮추고 반응 속도를 증가시킬 수 있었고, 표면 조도, 모폴로지, 구동력 등을 측정하여 향상된 구동 현상을 나타내는 제조방법에 대한 연구를 하였다.

• 한국식생활문화학회지
• /
• 제11권1호
• /
• pp.1-5
• /
• 1996

국내 주요지역에서 생산되는 곶감 및 표면 백색분말의 당조성과 분말의 형태를 주사전자현미경으로 관찰하였다. 곶감과육의 당함량은 $56{\sim}59%$ 정도였으며 주로 glucose와 fructose로 이루어져 있었다. 백색분말은 당 84.6%, 수분 12.5% 및 불용성 물질이 2.7% 정도였으며 당조성에 있어서는 glucose가 83.3%를, fructose가 16.7%로 대부분이 glucose였다. 백색분말을 주사전자현미경으로 관찰한 결과 판, 꽃, 침 및 뿔등의 형태를 이루고 있었으며 수화후 재결정화한 glucose와 비슷한 형태를 나타내었다. 곶감 표면의 백색분말은 건조과정중 과육내부의 당이 수분의 이동과 함께 건조표면으로 이동하여 건조가 진행됨에 따라 주로 glucose가 결정화된 것으로 보여진다.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.99-105
• /
• 2015

PURPOSES: In this study, alkali-activated blast-furnace slag (AABFS) was investigated to determine its capacity to absorb carbon dioxide and to demonstrate the feasibility of its use as an alternative to ordinary Portland cement (OPC). In addition, this study was performed to evaluate the influence of the alkali-activator concentration on the absorption capacity and physicochemical characteristics. METHODS: To determine the characteristics of the AABFS as a function of the activator concentration, blast-furnace slag was activated by using calcium hydroxide at mass ratios ranging from 6 to 24%. The AABFS pastes were used to evaluate the carbon dioxide absorption capacity and rate, while the OPC paste was tested under the same conditions for comparison. The changes in the surface morphology and chemical composition before and after the carbon dioxide absorption were analyzed by using SEM and XRF. RESULTS: At an activator concentration of 24%, the AABFS absorbed approximately 42g of carbon dioxide per mass of paste. Meanwhile, the amount of carbon dioxide absorbed onto the OPC was minimal at the same activator concentration, indicating that the AABFS actively absorbed carbon dioxide as a result of the carbonation reaction on its surface. However, the carbon dioxide absorption capacity and rate decreased as the activator concentration increased, because a high concentration of the activator promoted a hydration reaction and formed a dense internal structure, which was confirmed by SEM analysis. The results of the XRF analyses showed that the CaO ratio increased after the carbon dioxide absorption. CONCLUSIONS : The experimental results confirmed that the AABFS was capable of absorbing large amounts of carbon dioxide, suggesting that it can be used as a dry absorbent for carbon capture and sequestration and as a feasible alternative to OPC. In the formation of AABFS, the activator concentration affected the hydration reaction and changed the surface and internal structure, resulting in changes to the carbon dioxide absorption capacity and rate. Accordingly, the activator ratio should be carefully selected to enhance not only the carbon capture capacity but also the physicochemical characteristics of the geopolymer.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.253-257
• /
• 2014

Objectives: This study aimed to compare the surface microhardness of mineral trioxide aggregate (MTA) samples having different thicknesses and exposed to human blood from one side and with or without a moist cotton pellet on the other side. Materials and Methods: Ninety cylindrical molds with three heights of 2, 4, and 6 mm were fabricated. In group 1 (dry condition), molds with heights of 2, 4, and 6 mm (10 molds of each) were filled with ProRoot MTA (Dentsply Tulsa Dental), and the upper surface of the material was not exposed to any additional moisture. In groups 2 and 3, a distilled water- or phosphate-buffered saline (PBS)-moistened cotton pellet was placed on the upper side of MTA, respectively. The lower side of the molds in all the groups was in contact with human blood-wetted foams. After 4 day, the Vickers microhardness of the upper surface of MTA was measured. Results: In the dry condition, the 4 and 6 mm-thick MTA samples showed significantly lower microhardness than the 2 mm-thick samples (p = 0.003 and p = 0.001, respectively). However, when a distilled water- or PBS-moistened cotton pellet was placed over the MTA, no significant difference was found between the surface microhardness of samples having the abovementioned three thicknesses of the material (p = 0.210 and p = 0.112, respectively). Conclusions: It could be concluded that a moist cotton pellet must be placed over the 4 to 6 mm-thick MTA for better hydration of the material. However, this might not be necessary when 2 mm-thick MTA is used.

• 공업화학
• /
• 제32권4호
• /
• pp.371-378
• /
• 2021

고체 표면의 박테리아 부착억제를 목적으로 고분자를 이용한 친수성 표면 개질 연구가 주목을 받고 있다. 부착억제기능은 세포독성이 아닌 작용으로 바이오필름 형성의 초기단계 방지를 목적으로 하며 친수성 또는 이온성 고분자가 도입된 고체 표면은 단백질, 박테리아 등 생물 개체의 부착방지에 효과적이다. 이는 표면에서의 친수층 형성으로 인한 표면 장벽 형성, 고분자 사슬에 의한 반발력과 삼투압성 응력 작용, 그리고 이온성 고분자와 세포 표면의 정전기적 상호작용에 기인한다. 부착억제를 위한 고분자의 표면 도입은 주로 표면 기능기와의 결합을 이용한 접합 방식과 자연모방 접착 기능기를 활용한 침적 방식으로 이루어지고 있다. 본 총설에서는 표면 도입 시 부착억제 기능을 보이는 대표적인 고분자의 종류, 코팅방법, 및 항균 특성을 소개하고 향후 공공시설, 산업 등으로의 대면적 응용을 위한 고려사항들을 다루고자 한다.