• 한국해양공학회지
• /
• 제20권5호
• /
• pp.23-29
• /
• 2006

A quasi depth-varying mathematical model for wind-generated circulation in coastal areas, expressed in terms of the depth-averaged horizontal velocity components and free surface elevation was validated and used to understand the diurnal circulation process. The wind velocity is considered as a dominant factor for driving the current. In this paper, three-dimensional numerical experiments that included the land topography were used to investigate the mesoscale air flaw over the coastal regions. The surface temperature of the inland area was determined through a surface heat budget consideration with the inclusion of a layer of vegetation.A series of numerical experiments were then carried out to investigate the diurnal response of the air flaw and wind-generated circulation to various types of surface inhomogeneities.

• 한국항만학회지
• /
• 제9권2호
• /
• pp.25-38
• /
• 1995

The wind generated circulation model describes the phenomenon based on the following physical assumptions: a) As the horizontal dimension of the flow domain is several orders of magnitude larger than vertical dimension, nearly horizontal flow is realistic. b) The time taken for circulation to develop may effect on the flow domain of the earth's rotation, the contribution of the Coriolis force. c) A flow domain of large dimension results in quite large Reynolds number and the Reynolds stresses are approximated by the turbulent mean velocity gradient. d) The circulation is forced by the shear stresses on the water surface exercised by the wind. Modification made to the depth average approximation of the convective terms and the bed shear stress terms by adopting a certain distribution of current over the depth and laboratory measurements for the bed shear expression. Modification circulation patterns, energy evolution and surface profile gave the significant differences comparing with the classical model results. The modified model results in higher free surface gradients balancing both the free surface shear and the bed shear and consequently to higher surface profiles along the coast.

• 상하수도학회지
• /
• 제34권6호
• /
• pp.503-512
• /
• 2020

Identifying the water circulation status is one of the indispensable processes for watershed management in an urban area. Recently, various water circulation models have been developed to simulate the water circulation, but it takes a lot of time and cost to make a water circulation model that could adapt the characteristics of the watershed. This paper aims to develop a water circulation state estimation model that could easily calculate the status of water circulation in an urban watershed by using multiple linear regression analysis. The study watershed is a watershed in Seoul that applied the impermeable area ratio in 1962 and 2000. And, It was divided into 73 watersheds in order to consider changes in water circulation status according to the urban characteristic factors. The input data of the SHER(Similar Hydrologic Element Response) model, a water circulation model, were used as data for the urban characteristic factors of each watershed. A total of seven factors were considered as urban characteristic factors. Those factors included annual precipitation, watershed area, average land-surface slope, impervious surface ratio, coefficient of saturated permeability, hydraulic gradient of groundwater surface, and length of contact line with downstream block. With significance probabilities (or p-values) of 0.05 and below, all five models showed significant results in estimating the water circulation status such as the surface runoff rate and the evapotranspiration rate. The model that was applied all seven urban characteristics factors, can calculate the most similar results such as the existing water circulation model. The water circulation estimation model developed in this study is not only useful to simply estimate the water circulation status of ungauged watersheds but can also provide data for parameter calibration and validation.

• 한국의상디자인학회지
• /
• 제25권3호
• /
• pp.53-67
• /
• 2023

Blood circulation is one of the most important life support functions of our body. It is essential to maintain healthy blood circulation as problems with blood circulation can lead to numerous diseases and serious complications. This study developed women's leggings with gradual compression and soft surface heating functions to improve blood circulation, and evaluated their performance and wearability. A silicon print pattern was developed to provide gradual compression, and a flexible heating surface coated with MWCNT (multi-walled carbon nanotube) conductive ink was fabricated for comfort and thermal effect. For the design, incision lines and materials were applied in consideration of aesthetic aspects, and design lines and colors were altered using a 3D program. The developed leggings showed that blood circulation can be improved when gradual compression and heating functions are simultaneously applied. Results were confirmed through measurements of clothing pressure, blood flow, and surface temperature. In the subjective wearability evaluation, it was confirmed that wearers felt gradual pressure, and they showed high satisfaction with wearability and design.

• 소성∙가공
• /
• 제33권4호
• /
• pp.241-247
• /
• 2024

The triply periodic minimum surface (TPMS) shape with a complex geometry can easily manufactured from additive manufacturing processes. The TPMS shape has a high surface-to-volume ratio. In addition, the TPMS shape increases the possibility of the self-circulation when the fluid flows inside the TPMS structure. Due to these reason, the performance of the fluid flow filter can be greatly improved when the TPMS structure is applied to the filter. The aim of this paper is to investigate the influence of the design of the unit cell for TPMS on self-circulation characteristics of air using computational fluid dynamics (CFD). From the results of the CFD, the effects of the shape and the dimension of the unit cell for TPMS on the self-circulation pattern and the pressure difference are examined. Finally, a proper design of the TPMS is discussed from the viewpoint of self-circulation of air.

• 한국해양학회지:바다
• /
• 제29권2호
• /
• pp.77-100
• /
• 2024

진해·마산만에 대한 연구는 그동안 해수순환, 조석, 조류, 적조, 수질, 빈산소 환경을 주제로 많이 연구되었으나 주로 단기간 동안 일어나는 해양현상에 대해 연구가 수행되었으며, 만 전체적인 해수순환을 일으키는 물리적 기작을 자세히 살펴본 연구는 부족했다. 오염 물질의 이동과 확산 같은 현상은 주로 계절별로 변동성이 크기 때문에, 이 연구에서는 진해·마산만 해역의 해수순환이 계절적으로 어떻게 변동하는지를 파악하고자 하였다. 이를 위하여 3차원 해양 순환 모델을 이용하여 2016년부터 2018년까지 진해·마산만의 해수순환을 수치모의하고, 여름철과 겨울철 해수순환을 표층, 중층, 저층에 대하여 살펴보았다. 또한 조석, 바람, 담수 유입에 대한 민감도 실험을 수행하여 각 요인들이 해수 유동에 미치는 영향을 분석하였다. 진해·마산만의 해수순환은 가덕수도 저층에서 대한해협의 해수가 유입되고, 표층에서 진해·마산만의 해수가 유출되는 대류성 염하구 순환이 일어난다. 가덕수도를 통해 교환되는 해수의 순환은 크게 진해만 동부해역과 진해만 서부해역으로 나누어져 일어난다. 각 해역의 수로 방향을 기준으로 해수 수송량을 계산하였을 때, 진해만 동부해역의 남북방향 해수 교환 수송량은 진해만 서부해역에서 일어나는 동서방향 해수 교환량보다 겨울철에는 2.3배, 여름철에는 1.4배 크다. 진해만 서부해역은 계절별로 작용하는 힘들의 균형이 변화하여 해수순환 특성이 계절에 따라 크게 다르다. 겨울철에는 북서풍이 만드는 전단응력과 해수면 기울기의 영향으로 표층 해류가 남쪽으로, 저층 해류는 북쪽으로 흐르는 남북방향 대류성 순환이 강화된다. 반면, 남서풍이 부는 여름철에는 바람 응력에 의해 표층 해수가 동쪽으로 유출되고, 또한 남동쪽 해수면이 높아 북쪽 방향 순압성 압력경도력이 커져 동쪽 방향 유속이 강화된다. 저층에서는 밀도 구배가 커져 경압성 압력경도력이 남쪽으로 크게 작용하여 지형류 균형에 의해 가덕수도의 해수가 서쪽으로 강하게 유입하는 동서방향 대류성 순환이 겨울철보다 26% 강화된다. 진해만 서부의 대류성 순환은 겨울과 여름 모두 조류와 바람의 영향을 크게 받는다. 진해만 동부해역과 마산만에서는 모든 계절에 표층에서는 해수가 외해로 유출되고, 저층에서는 해수가 만 안쪽으로 유입되는 전형적인 염하구 순환을 보였다. 겨울철에는 바람과 담수유입이, 여름철에는 조류의 영향이 남북방향 염하구 순환 규모에 크게 기여하였다. 진해만 동부해역에는 지형의 영향을 받아 형성된 조석 잔차류도 뚜렷하다. 이 연구에서 제시한 진해·마산만의 계절별 해수순환 특성은 이 해역의 오염물질 확산, 여름철 빈산소수괴의 형성 기작 파악, 적조 생물의 유입과 유출을 이해하는 데 도움이 될 것으로 기대된다.

• 한국해양공학회지
• /
• 제14권3호
• /
• pp.46-54
• /
• 2000

Three dimensional numerical experiments that included the land-use transformation by the large scale reclamation were used to investigate the mesoscale air flow over the coastal regions. In this paper the surface temperature of the inland was determined through the surface heat budget consideration with inclusion of a layer of vegetation. The vertical diffusion coefficients of momentum, heat and specific humidity in the constant flux layer were taken from the Mellor and Yamada(1975). It has shown that the resulting model is able to reproduce the air circulation in coastal regions, and the simulated characteristics agree with the known properties of this circulation. A series of numerical experiments were then carried out to investigate the diurnal response of the air flow to various types of surface inhomogeneities.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1925-1930
• /
• 2006

흐름의 연직분포를 가정하여 수면에서 바닥까지 적분하여 평균화한 방정식에 기초한 준2차원 흐름모형을 연안해역에서의 취송류해석을 위해 적용되었다. 바람장의 변동에 따른 취송류장의 변동이 크게 나타나므로 본 연구에서는 육상지형의 영향을 고려할 수 있는 3차원 중규모 지역기상장 모형을 통해 연안해역에서의 시간에 따른 바람장변동을 수치해석 하였다. 육상에서의 지표면 열수지 변화를 위해 식생모델을 적용하였다. 기상장과 취송류 해석을 위한 수치모형실험결과 바람장의 변동에 따른 연안역에서의 흐름특성을 효과적으로 예측하고 있음을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.352-355
• /
• 2006

In this study, the seasonal and inter-annual variation of sea surface current in the Gulf of Thailand were revealed through the use of WOD temperature and salinity data and monthly sea surface dynamic heights (SSDH) from TOPEX/Poseidon and ERS-2 altimetry data during 1995-2001. The mean dynamic height and mean geostrohic current were derived from the climatological data while SSDH data gave monthly dynamic heights and their geopstrophic currents. The mean geostrophic current showed strong southward and westward flow of South China Sea water along the gulf entrance. Counterclockwise eddy in the inner gulf and the western side of the gulf entrance associated with upwelling in the area. Seasonal geostrophic currents show basin-wide counterclockwise circulation during the southwest monsoon season and clockwise circulation during the northeast monsoon season. Upwelling was enhanced during the southwest monsoon season. The circulation patterns varied seasonally and inter-annually probably due to the variation in wind regime. And finally we found that congregation, spawning, and migration routes of short-bodied mackerel conform well with coastal upwelling and surface circulation in the gulf.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2053-2058
• /
• 2008

It was investigated thermal performances on two array types of a serial circulation and a two-way parallel circulation for six water-cooled cold plates covered with non-metallic material (polycarbonate, PC) to reduce weight of the cooling devices for humanoid robot cooling. Six cold plates attached on $10{\times}10\;mm^2$ copper base : $0.5{\times}0.5\;mm^2$ pin-finned surfaces of 1.5 mm high with 0.5 mm array spacing, was mounted on six copper heating blocks with isothermal conditions of $50{\sim}90^{\circ}C$, respectively. In order to compare thermal characteristics according to two circulation types, the surface temperatures of heating blocks and the cooling water temperatures at inlets and outlets of cold plates were measured. From the results, it was found that a two-way parallel circulation was better performance than a serial circulation in terms of total thermal resistance, total heat transfer rate, and surface temperature rises from $1^{st}$ heating block to last one for six multiple cold plates.