• 한국표면공학회지
• /
• 제22권4호
• /
• pp.185-196
• /
• 1989

The surface modification of a mild and stainless steel by alumina sprayed coating were studied. The effects of surface roughness and bond coating layer on the adhesive strengthy and durability of sprayed specimens were also investiated. The adhesive strength of ceramic coating was affected by surface roughness and bond coating layer thinkness. That showed excellent undergrit blast time and bond coating layer; 60 sec and 0.15-0.33mm, respectively. The adhesive strength and densification of sprayed coating with air pressure were superior to those of without and fracture was mainly occured at alumina-bond coating interface. Under ambient atmosphere at $800^{\circ}C$, the oxides existed within bond coating layer promote diffusion of oxygen to lower durability of sprayed specimens. In this case, fracure was occured at sudstrate-bond coating interface.

• 한국식물병리학회지
• /
• 제14권5호
• /
• pp.413-417
• /
• 1998

Magnaporthe grisea, the casual agent of rice blast, requires formation of an appressorium, a dome-shaped and well melanized infection structure, to penetrate its host. Environmental cues that induce appressorium formation include hydrophobicity and hardness of contact surface and chemicals from its host. Artificial surfaces are widely used to induce appressorium formation, but frequencies of appressorium induction are not always consistent. To understand variable induction of appressorium formation in M. grisea, several factors were tested on GelBond. High levels of appressorium formation were induced over a wide range of temperature (20~3$0^{\circ}C$) and pH (4~7). spore age up to 3-week-old did not significantly affect appressorium formation, but only a few apressoria on GelBond. However, adenosine specifically inhibited appressorium formation. Adenosine inhibition of appressorium formation was restored by exogenous addition of cAMP. Germ tube tips of M. grisea maintained the ability to differentiate appressoria by chemical inducers on GelBond at least up to 16 h after conidia germination. These results suggest that environmental factors have little effect on the variable induction of appressorium formation on the artificial surface in M. grisea.

• Journal of Periodontal and Implant Science
• /
• 제43권6호
• /
• pp.301-307
• /
• 2013

Purpose: This in vitro study was performed to assess the adherence of Porphyromonas gingivalis to a resorbable blast media (RBM) titanium surface pretreated with an ultrasonic scaler or toothbrush and to evaluate the effects of the treatment of the RBM titanium discs on the bacterial removal efficiency of brushing by crystal violet assay and scanning electron microscopy. Methods: RBM titanium discs were pretreated with one of several ultrasonic scaler tips or cleaned with a toothbrush. Then the titanium discs were incubated with P. gingivalis and the quantity of adherent bacteria was compared. The disc surfaces incubated with bacteria were brushed with a toothbrush with dentifrice. Bacteria remaining on the disc surfaces were quantified. Results: A change in morphology of the surface of the RBM titanium discs after different treatments was noted. There were no significant differences in the adherence of bacteria on the pretreated discs according to the treatment modality. Pretreatment with various instruments did not produce significant differences in the bacterial removal efficiency of brushing with dentifrice. Conclusions: Within the limits of this study, various types of mechanical instrumentation were shown to cause mechanical changes on the RBM titanium surface but did not show a significant influence on the adherence of bacteria and removal efficiency of brushing.

• 화약ㆍ발파
• /
• 제24권1호
• /
• pp.57-62
• /
• 2006

인도네시아 파시르 탄광에서는 전형적으로 일자유면 발파방법이 사용되고 있다. 일자유면 발파방법은 지표면을 유일한 자유면으로 한 발파법이므로 구속이 커서 화약의 에너지가 저항선의 파괴보다는 지반진동의 유발에 더 많이 소모된다 따라서 파시르 탄광에서 현재 적용되는 일자유면 발파방법은 노천광산에서 일반적으로 적용되는 이자유면 발파인 계단발파에 비해 더 큰 지반진동을 유발시킬 수 있다. 더욱이 파시르 탄광의 경우 노천채굴적의 양안이 연약사면으로 이루어져 있어 발파진동은 이들 사면들의 안정성에 큰 영향을 미칠 수 있다. 발파진동과는 별도로 일자유면 발파는 본래 저항선이 하나뿐이므로 암반파괴의 측면에서도 발파효율이 좋지 않다. 따라서 파시르 탄광이 안고 있는 현안문제를 해결할 목적으로 진동제어와 발파효율을 동시에 향상시킬 수 있는 새로운 발파공법에 대한 연구가 착수되었다. 이 연구의 일환으로 파시르 탄광에서의 현행 발파공 법과 광산개발에 대한 현장조사가 수행되었으며 / 본 논문에서는 현장조사 과정에서 얻어진 결과들 가운데 향후 새로운 발파공법으로의 전환과정에서 반드시 준수되어야 할 공법설계의 지침을 제시하였다.

• Journal of Periodontal and Implant Science
• /
• 제53권6호
• /
• pp.444-452
• /
• 2023

Purpose: The aim of this study was to retrospectively evaluate the survival and failure rates of RESTORE^® implants over a follow-up period of 10-15 years at a university dental hospital and to investigate the factors affecting the survival rate of these dental implants. Methods: A total of 247 RESTORE^® dental implants with a resorbable blast media (RBM) surface inserted in 86 patients between March 2006 and April 2011 at the Department of Periodontology of Seoul National University Dental Hospital were included. Patients with follow-up periods of less than 10 years were excluded, and data analysis was conducted based on dental records and radiographs. Results: Over a 10- to 15-year period, the cumulative survival rate of the implants was 92.5%. Seventeen implants (6.88%) were explanted due to implant fracture (n=10, 4.05%), peri-implantitis (n=6, 2.43%), and screw fracture (n=1, 0.4%). The results of univariate regression analysis using a Cox proportional hazards model demonstrated that implants placed in male patients (hazard ratio [HR], 4.542; 95% confidence interval [CI], 1.305-15.807; P=0.017) and implants that supported removable prostheses (HR, 15.498; 95% CI, 3.105-77.357; P=0.001) showed statistically significant associations with implant failure. Conclusions: Within the limitations of this retrospective study, the RESTORE^® dental implant with an RBM surface has a favorable survival rate with stable clinical outcomes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.391-396
• /
• 2001

Exposed concrete execution is utilized insufficiently due to surface honecomb and undesirable appearance by entrapped air when existing placing method is applied. Therefore, surface glossing and impact properties of cement mortar incorporating fiber glass net blast furnace slag, expansive admixture and Polypropylene fiber are investigated in order to develop precast exposed concrete pannel by dry construction method. The kinds of the forms, placing method and admixture contents are varied. According to test results, surface glossing decrease with elapse of age. Considering the form kinds, surface glossing with acryle + astage shows the best performance. Placing horizontally shows positive results in reducing surface defects such as honecomb. Impacting resistance shows the best performance when glass fiber net applied, due to the enhance in toughness and absorption of impact.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.182-183
• /
• 2019

In this study, the optimization of mixing proportion of press-forming board with blast furnace slag, pearlite and bottom ash was investigated using the response surface methodology. Ten Mixing proportions of specimens were designed by the response surface design, and then flexural failure load, moisture content and water absorption of specimens were measured. As a result of the reaction surface analysis based on the experimental results, it was possible to derive the optimal mixing proportion with the satisfaction of 93%.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.41-51
• /
• 2015

PURPOSES: This study investigates the mechanical performance of carbon-capturing concrete that mainly contains blast furnace slag. METHODS: The mixture variables were considered; these included Portland cement content, which was varied from 10% to 40% of the blast furnace slag by weight. The specimens were exposed to different conditions such as high $N_2$ and $O_2$ concentrations, laboratory conditions and high $CO_2$ conditions. Mechanical performances, including compressive and flexural strengths and carbon-capturing depth, were evaluated. RESULTS : The slump, air content and unit weight were not affected significantly by the variation in cement content. The strength development when the specimens were exposed to high purity air was slightly greater than that when exposed to high $CO_2$. As the cement content increased the compressive and flexural strength increased but not considerably. The carbon-capturing capacity decreased as the cement content increased. The specimens exposed in the field for 70 days had flexural strength greater than 3 MPa. CONCLUSIONS : The results indicate that cement content is not an important parameter in the development of compressive and flexural strengths. However, the carbon-capturing depth was higher for less cement content. Even after field exposure for 70 days, neither any significant damage on the surface nor any decrease in strength was observed.

• 화약ㆍ발파
• /
• 제34권1호
• /
• pp.11-18
• /
• 2016

도심지나 보안건물과 근접한 곳에서 폭약을 사용하는 발파작업이 수행되는 경우 지반진동 및 소음의 영향을 최소화 시킬 필요가 있다. 이러한 지반진동과 소음은 암반의 천공내에 장전된 폭약이 기폭되며 주변 암반을 파괴하고 남은 일부 충격에너지에 의하여 발생된다. 최근 천공 내 U형 철재장약홀더를 삽입하여 충격파의 전파방향을 제어하여 자유면방향으로 파쇄효과를 유지하며 암반 내로 전파하는 충격진동을 감쇄시키는 발파 공법이 제안되었다. 본 연구에서는 U형 철재장약홀더를 적용한 암반발파에서 충격파의 전파특성을 파악하기 위하여, AUTODYN 소프트웨어를 이용하여 장약홀더 내 장전된 폭약의 폭굉을 모사하고 주변암반에 전달된 충격파를 측정하였다. 또한 장약홀더 발파의 암파쇄 효과를 파악하기 위하여 동적파괴과정해석코드인 DFPA(Dynamic Fracture Process Analysis)를 적용하여 장약홀더를 이용한 장약조건을 고려한 2자유면 발파를 모사하였다. 일반발파의 장약조건을 고려한 충격파 발생 및 파괴과정해석을 추가적으로 수행하여 장약홀더의 암파쇄효과를 비교하였다.

• 화약ㆍ발파
• /
• 제23권2호
• /
• pp.57-66
• /
• 2005

A major concern with blasting at surface mines is generation of ground vibration, air blast, flyrock, dust & fume and their impact on nearby structures and environment. A study was conducted at a coal mine in India which produces 10 million tonne of coal and 27 million cubic meter of overburden per annum. Draglines and shovels with dumpers carry out the removal of overburden. Detonation of 100 tonnes of explosives in a blasting round is a common practice of the mine. These large sized blasts often led to complaints from the nearby inhabitants regarding ground vibrations and their affects on their houses. Eighteen dragline blasts were conducted and their impacts on nearby structures were investigated. Extended seismic arrays were used to identify the vibration characteristics within a few tens meters of the blasts and also as modified by the media at distances over 5 km. 10 to 12 seismographs were deployed in an array to gather the time histories of vibrations. A signature blast was conducted to know the fundamental frequency of the particular transmitting media between the blast face and the structures. The faster decay of high frequency components was observed. It was also observed that at distances of 5km, the persistence of vibrations in the structures was substantially increased by more 10 seconds. The proximity of the frequency of the ground vibration to the structure's fundamental frequencies produced the resonance in the structures. On the basis of the fundamental frequency of the structures, the delay interval was optimized, which resulted into lower amplitude and reduced persistence of vibration in the structures.