• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 1997

It is important to investigate the molecular arrangement and the orientational distribution in the study of LB films. Polarized UV/visible absorption spectra make it possible to reveal the molecular arrangement and the orientational distribution. It is clarified that the PAAS LB films have specific directions in the molecular arrangement and the orientational distribution, which art different in intensity corresponding to the surface pressure. Unpolarized UV/visible absorption spectra reveal that the surface pressure is proportional to the finn thickness and is related to the molecular orientation. Current-Voltage(I-V) measurements provide that the current decreases as the surface pressure increases and there are certain phenomena called switching phenomena. Switching effort indicates that the current flows in high conductivity during on-state and suddenly decreases into low conductivity during off-state.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.291-296
• /
• 2014

Most of the statistical signal analysis processed in the time domain and the frequency domain are based on the assumption that the signal is weakly stationary(wide sense stationary). Therefore, it is necessary to know whether the surface EMG signals processed in the statistical basis satisfy the condition of weak stationarity. The purpose of this study is to analyze the accuracy of the Run-test, modified Run-test, RA(reverse arrangement)-test, and modified RA-test for assessing surface EMG signal stationarity. Six stationary and three non-stationary signals were simulated by using sine wave, AR(autoregressive) modeling, and real surface EMG. The simulated signals were tested for stationarity using nine different methods of Run-test and RA-test. The results showed that the modified Run-test method2 (mRT2) classified exactly the surface EMG signals by stationarity with 100% accuracy. This finding indicates that the mRT2 may be the best way for assessing stationarity in surface EMG signals.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권1호
• /
• pp.119-123
• /
• 2002

In this study, we discussed the characteristics of breakdown and surface flashover of FRP in L$N_2$ for applying it to spacer of a superconducting power equipment. Fiberglass reinforced plastic(FRP) has high breakdown puncture strength and has high mechanical strength. So the research of its dielectric properties have been conducted in liquid nitrogen($LN_2$). We measured breakdown voltage of FRP and distinguished four types of surface flashover along solid insulator with arrangement of electrodes and measured the surface flashover voltages of each types of electrode arrangement. The type of a electrode set at the back of the insulator showed the worst dielectric property. The property of surface flashover depending on pressure was tested.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.338-343
• /
• 2012

The early osseointegration of titanium (Ti) dental implants is related to the initial cell morphology. The morphology of the cells (mesenchymal stem cells, MSC) was observed on three different Ti disc surfaces, which were mechanically treated by polishing, blasting, and scratching. A non-directional surface (isotropic texture) was obtained by the blasting of HA grits on cp-Ti discs, and a unidirectional surface (anisotropic texture) was obtained by the scratching of SiC papers. The cell attachment and arrangement in the initial periods were quite similar, but those in the later periods were significantly affected by the texture of the cp-Ti discs. After 1 week, the blasted Ti discs showed non-directional arrangement or spreading of the cells, whereas the scratched cp-Ti discs showed unidirectional properties parallel to the direction of the scratched grooves on the surface. The surface roughness of the cp-Ti discs significantly affects cell proliferation. Cell proliferation on the blasted and scratched surfaces was about 60% and 40% higher compared to the control result (polishing group) after 1 week (P<0.05). Cell proliferation on the blasted and scratched surfaces after 1 week was slightly enhanced with increasing surface roughness. It is believed that the direction of cell attachment and arrangement is closely related to the surface texture of the substrate surfaces, but cell proliferation after a relatively long period of time is directly enhanced by the surface roughness, not by the surface texture.

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.395-406
• /
• 2012

Basic problem of pile foundation is three dimensional in nature. Three dimensional finite element formulation is employed for the analysis of pile groups. Pile, pile-cap and soil are modeled using 20 node element, whereas interface between pile or pile cap and soil is modeled using 16 node surface element. A parametric study is carried out to consider the effect of pile spacing, number of piles, arrangement of pile and soil modulus on the response of pile group. Results indicate that the response of pile group is dependent on these parameters.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.741-748
• /
• 2006

This paper numerically investigates the effects of pass arrangement on the flow distribution characteristics and the performance of a multi-pass multi-branch heat exchanger. Four cases of pass arrangement (2, 4, 6, 8 pass) are chosen to select a proper pass arrangement. A JF factor is used as an evaluation characteristic value to consider the heat transfer and the pressure drop. The present results indicate that 4-pass heat exchanger shows the best performance, and the design parameters in 4-pass heat exchanger are optimized. The design parameters are the locations of the inlet, outlet and separator, and are optimized using a response surface methodology. The JF factor of the optimum model is increased by about 9.3%, compared to that of the reference model (2-pass heat exchanger).

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.328-334
• /
• 2012

본 논문에서는 레이더 단면적(RCS, Radar Cross Section)을 감소시키기 위한 전자파 구조로서 십자형 다이폴 슬롯을 원소로 가지며 다른 배열형태 구조를 갖는 구형 주파수 선택적 표면(FSS, Frequency Selective Surface) 구조의 전파특성을 해석하였다. 유한크기와 곡면형상을 갖는 구형 주파수 선택적 표면 구조의 주파수 특성을 해석하기 위해 RWG 함수를 적용한 3차원 모멘트법을 사용하였으며 반복법 중 하나인 BiCGSTab(Biconjugate Gradient Stabilized) 알고리즘을 적용하여 해석시간의 효율성을 개선하였다. 1m 직경을 갖는 완전도체(PEC, Perfect electric conductor)의 구에 대한 이론적 해석결과인 Mie의 RCS 특성과 비교 검증하여 제안한 해석 알고리즘의 유효함을 입증하였다. 구형 주파수 선택적 표면 구조에서 슬롯 성분의 배열 방법에 따른 RCS 변화를 관찰하여 비교하였으며, 곡면형상의 주파수 선택구조 설계시 배열의 방법도 RCS 특성에 중요한 변수가 될 수 있음을 확인하였다.

• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.47-59
• /
• 2021

This study aims to provide inspiration and methods for menswear design by analyzing elements for men's fashion using flower images. The results are as follows: Men's fashion types with flower images were categorized as classic tailored, casual tailored, casual wear, sports-outdoor. The order of frquency was casual tailored, casual, classic tailored, and sports outdoor. For the classic tailored type, the flower images are related with an X-line silhouette, and the arrangement methods, such as a scattered patterns, one-point patterns, and surface techniques, such as printing and embroidery were used, and similar color or monochromatic schemes appeared sequentially. For the casual tailored type, the flower images are related to an H-line silhouette, arrangement methods such as a scattered pattern, panel pattern, and surface techniques, such as print, embroidery, and jacquard were used, similar color and accent color schemes appeared sequentially. For the casual type, the flower images are related to H-line and Y-line silhouettes, and arrangement methods, such as a scattered pattern, all-round continuous pattern, and panel pattern, and surface techniques, such as print, jacquard, embroidery, and patchwork were used, similar color and contrast color schemes appeared sequentially. For the sports outdoor type, the flower image were related to A-line and H-line silhouettes, arrangement methods, such as a scattered pattern and all-round continuous pattern, and surface techniques, such as print and jacquard were used, monochromatic scheme and contrast color schemes appeared sequentially. Therefore, the flower images in men's fashion were applied to various design elements, and displayed an interesting result, different from conventional design approach.

• 설비공학논문집
• /
• 제18권8호
• /
• pp.656-663
• /
• 2006

The convective heat transfer on the outer surface of tube arrays perpendicular to the flow direction was experimentally investigated. The test sections which include the aligned and staggered arrangements were made and the local heat transfer coefficients on the outer surface of the tube were measured after the flow has been fully developed. The results showed that the local heat transfer coefficients of the staggered arrangement, which has transverse pitch of 0.075 m and longitudinal pitch of 0.08 m, were about 15% greater than that of the aligned arrangement. Also, the overall mean Nusselt number of the former was greater than that of the latter. It is verified that the results obtained by using the simulation show the same tendency with those of experiment.