• Clinics in Shoulder and Elbow
• /
• v.10 no.2
• /
• pp.160-166
• /
• 2007

Purpose: The current study assessed the factors affecting outcomes of primary repair procedures in tears of multiple rotator cuff tendons. Materials and Methods: Among the cases of rotator cuff tears involving two or more tendons receiving operations between 1997 and 2003, The clinical results of 19 cases with more than 2 years follow-up were evaluated by the UCLA score. We evaluated the correlation of trauma, active motion, acromiohumeral distance, tear size, and surface area with the UCLA score using Pearson's linear correlation coefficient (PLCC). Results: UCLA scores increased significantly in all cases, from 9 to 26.1 on average. However, the results were good in 53%, and poor in 47% according to Ellman's criteria. Trauma, active elevation, acromiohumeral distance, and tear size did not correlate with the UCLA score, but the tear surface area was inversely correlated with the score (PLCC=-0.696). Cases with degeneration of the infraspinatus muscle above Goutallier grade III on MRI showed worse results than cases with less degeneration. Conclusion: The clinical results of primary repair of rotator cuff tears involving multiple tendons were satisfactory in 53% of patients. Large tear surface area and severe degeneration of the infraspinatus were poor prognostic factors.

• The Journal of the Korean dental association
• /
• v.54 no.5
• /
• pp.365-373
• /
• 2016

Purpose: Cemental tear is a specific type of root surface fracture characterized by a complete separation of a cemental fragment along the cementodentinal junction or a partial split within the cementum along an incremental line. It is suggested to be a factor for periodontal or periapical tissue destruction. The aim of this study is to present a diagnosis and treatment of cemental tear associated with periapical lesion with root canal treatment and regenerative periodontal surgery. Treatments: A 60-year-old male who had a history of sports trauma on the mandibular right central incisor about 10 years ago presented with apical cemental tear. Clinical examination showed a slightly dark yellowish discoloration and sinus tract that was located on the apical labial mucosa. The mobility and percussion were also assessed on the diseased tooth and recorded as $Miller^{\circ}{\phi}s$ Class II and tenderness to percussion. The probing depth was within the normal limit (<3 mm). Radiographic examination revealed a radiolucent lesion at the apical area and extended to distal aspect of the tooth along the fragment of cemental tear. After root canal treatment, periapical surgery was performed. The bony defect was exposed and then the detached root fragment was removed. Apical root resection and retrograde filling with Mineral Trioxide Aggregate (MTA) were accomplished and the bony defect was filled with deproteinized bovine bone mineral (DBBM) and covered with biodegradable collagen membrane. Results: After 9-month follow-up, healing of the mandibular right central incisor was uneventful and no swelling, purulence or pain was revealed in the associated area. Probing pocket depth was favorably stable, and the tooth mobility was decreased to the Miller's Class I. Conclusions: Apical cemental tear associated periapical lesion could be successfully treated with removal of the detached cementum in combination with apical surgery and GTR procedure.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.125-131
• /
• 2015

Purpose: The effect of pigmentation in circle contact lens on lens wearers' tear film stability was investigated in this study. Methods: Non-invasive tear film break-up times of 54 normal eyes before and after lens wearing in twenties and the portion of first tear breakup were measured. The frontal and back surface roughness of circle contact lens was further observed with a scanning electron microscope. The clear lens which was made of hilafilcon B and circle contact lenses which were made of hilafilcon B, polymacon and copolymer of HEMA NVP were tested. Results: Non-invasive tear film breakup time was significantly reduced compared with it before lens wearing. In some case, statistically significant difference in tear film breakup time was also observed between circle contact lenses. The tear file break-up was usually early started in lower than upper portion, and in temporal than nasal portion although there was variation in the lens material. The tear film break-up of circle contact lenses made of hilafilcon B was more commonly observed in peripheral portion(pigmented area) compared with clear contact lens made of same material. Conclusions: The present study revealed that the stability of tear film was affected by wearing circle contact lens and the result seems to be used as the basis for the problem solving that can occur due to the pigmentation when wearing circle contact lens.

• Corrosion Science and Technology
• /
• v.15 no.2
• /
• pp.78-83
• /
• 2016

The e-coating to inhibit induced corrosion can deposit a coating not only on the exterior surface but also on the inside of whole metallic components of body-in-white (BIW). But it is difficult to deposit paint films on the inside area because metallic components are multi layered. It may cause shortness of e-coating thickness. The only way to properly verify e-coating thickness is by performing the use of tear-down prototypes. When paint films' thickness is inadequate, a structural modification on each metallic component is needed. Verification of the thickness improvement for a structural modification requires much manual effort and leads to increasing development time. Recently, the simulation technology has been developed to predict the e-coating thickness in e-coating field. By applying the simulation to BIW, improvement in paint thickness quality and shortening of development period are expected. The paper explains a validated solution that allows simulating the effect of design changes to the e-coating thickness and current density, thereby delivering results within a time frame of a few days.

• Clinics in Shoulder and Elbow
• /
• v.2 no.2
• /
• pp.178-186
• /
• 1999

Twenty-three patients with chronic shoulder pain beyond 6 months after the fracture of the greater tuberosity underwent arthroscopic treatment and were retrospectively assessed after an average of 29 months(range, 22 to 40 months). There were 18 men and 5 women with the average age of 39 years(range, 24 to 61 years). Fourteen were isolated fractures and nine were related to acute anterior instability episode. The average displacement of the fracture was 2.3mm(range, 0 to 4mm) on the anteroposterior view of the plane radiographs. At the time of arthroscopy, all patients had partial thickness rotator cuff tears in the articular surface. The cuff tears were located on the tuberosity fracture area and were an Ellman's grade I to n in depth. With the arthroscopic debridement or repair of the tear depending on the condition of the tear itself, as well as the subacromial decompression, the UCLA score revealed good to excellent results in 20 and fair in 3 patients. Nineteen of the patients had returned to the previous level of activities. The patient with a higher activity demand revealed a lower level of activity return(p=0.034). The partial thickness rotator cuff tear should be considered in patients with chronic shoulder pain after the minimally displaced fracture of the greater tuberosity, and arthroscopic debridement or repair is an appropriate procedure.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.39-46
• /
• 2000

In pulp and papermaking process, enzymatic treatment of pulp fibres has been a topic of increasing interest in last decade. Lots of patents, papers and research reports were published on the application of enzymes in the fields of enzymatic bleaching, deinking, slime control, pitch control, waste water treatment and fibre modification. Cellulase and hemicellulase are the principal enzymes used for the modification of fibre property. This study was carried out for determinating the behaviors of enzyme to pulp fibres. A commercial enzyme, Denimax BT which is consisted with cellulase and hemicellulase, was treated to the kraft pulp produced from domestic hardwood mixtures. Results were mainly concentrated on the behaviors of freeness, drainability and fines content of fibres, and physical properties of paper with enzyme treatment. The freeness levels and dewatering ability were developed, and the fines contents were decreased. The creation of fines were controlled by the method of pre-enzyme treatment prior to fibre beating. The mechanical strength of paper, like tensile, burst, tear strength and folding endurance, were remarkably improved by the pre-enzyme treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.2
• /
• pp.1-7
• /
• 2000

In the previous experiment, it was found that OCC pre-treatment with Hobart mixer at 20-25％ consistency for 3 hrs or more followed by the application of the equal refining time, caused the increase of tensile strength, burst strength, compressive strength and tear resistance, compared to the no pre-treated. Four completely different fibers, which were Hw-BKP, Sw-BKP, White ledger, and OCC were selected for this experiment to investigate the effect of mechanical pre-treatment process on different fibers. From the experiment, it was found that the mechanical pre-treatment did not decrease fiber length at all, but decreased freeness, com-pared to the no pre-treated, when the same refining time was applied. WRVs of the pre-treated fibers were higher than the no pre-treated at the same freeness level. It was speculated that the mechanical pre-treatment induced only hydrophilic nature of fibers without damaging fiber length by delaminating fiber walls. The fiber surface area and the physical strength differences of handsheets will be discussed in the next publication.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.69-69
• /
• 2000

In the previous experiment, it was found that OCC pre-treatment with Hobat mixer at 20-25% consistency for 3 hrs or more followed by the application of the equal refining time, caused the increase of tensile strength, burst strength, compressive strength and tear resistance, compared to the no pre-treated. Four completely different fibers, which were Hw-BKP, Sw-BKP, White ledger, and OCC were selected for this experiment to investigate the effect of mechanical pre-treatment process on different fibers. From the experiment, it was found that the mechanical pre-treatment did not decrease fiber length at all, but decreased freeness, compared to the no pre-treated, when the same refining time was applied WRVs of the pre-treated fibers were higher than the no pre-treated at the same freeness level. It was speculated that the mechanical pre-treatment induced only hydrophilic nature of fibers without damaging fiber length by delaminating fiber walls. The fiber surface area and the physical strength differences of handsheets will be discussed in the next publication.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.247-253
• /
• 2015

Purpose: The purpose of this study was to compare and analyze the ocular surface and the palpebral conjunctiva of categorized subjects, which were divided into normal eye group and dry eye group, by using a thermal camera. Methods: Subjects were 144 eyes of 72 normal university students, who didn't have any corneal disease, abnormal lacrimal ducts, medical records regarding ocular surgeries, or experience of using contact lens. Subjects were divided into two groups, which were normal eye group and dry eye group, based on the results of TBUT, Schirmer I test, and McMonnies test. After categorizing the subjects, the temperature of the subjects' ocular surface and the palpebral conjunctiva were measured and analyzed by using a thermal camera (Cox CX series, Answer co., Korea). Results: In the normal eye group's Central Ar.1, Nasal Ar.2, Temporal Ar.3, Superior Ar.4, Inferior Ar.5, the measured amount of temperature change on each area was $-0.13{\pm}0.08$, $-0.14{\pm}0.08$, $-0.12{\pm}0.08$, $-0.14{\pm}0.08$, $-0.10{\pm}0.09(^{\circ}C/sec)$. The dry eye group's results were $-0.17{\pm}0.08$, $-0.16{\pm}0.07$, $-0.16{\pm}0.08$, $-0.17{\pm}0.09$, $-0.15{\pm}0.08(^{\circ}C/sec)$. When compared with the normal eye group, the values of Ar.1, Ar.3, Ar.5 were significantly different in the dry eye group(p<0.05). The amount of temperature change, which was observed on the palpebral conjunctiva(Ar.1:central, Ar.2: nasal, Ar.3: temporal) of the normal eyes, measured by thermography, was $34.36{\pm}1.12$, $34.17{\pm}1.10$, $34.07{\pm}1.12^{\circ}C$ on each area. Same values taken from the dry eye group was $33.55{\pm}0.94$, $33.43{\pm}0.97$, $33.51{\pm}1.06^{\circ}C$ on each area. The values of Ar.1, taken from the dry eye group, had a significant difference, compared to the values of the normal eye group(p=0.05). Conclusion: The temperature of the ocular surface decreased faster on the dry eyes, compared to the normal eyes. The temperature measured on the palpebral conjunctiva of the dry eyes were also lower than the normal eyes. The temperature changes on the ocular surface, observed with a thermal camera, were objective values to assess the stability of tear films, and might provide useful data for studies related to dry eye syndrome.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.37-43
• /
• 2022

Patients tend to return to normal pronunciation patterns after fitting new dentures. However, for some patients, it takes a long time to adapt the new complete denture. In this case, the patient came to the hospital at the address of wanting to remake dentures due to wear and tear. After diagnosis through clinical and radiological examination, the maxillary complete denture and mandibular removable partial denture were remade. The patient complained whistling /s/ sound at the first check-up after placement of the new denture. The anterior palatal area of polished surface of the new maxillary complete denture was concave comparing to old denture, and this was the cause of the whistling /s/ sound. A tissue conditioning material was applied to the maxillary complete denture and patient made /s/ sound. The tissue conditioning material was replaced with self-curing type denture base resin, and the patient was immediately satisfied with clear /s/ sound. As an objective assessment, palatogram and speech analytics software was applied. In this case, a patient who received denture treatment complaining of difficulty in pronunciation underwent immediate denture repair, which resulted in patient satisfaction and improved pronunciation through objective evaluation.