• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.413-423
• /
• 1991

Multiaxial loading by combinations of tension-torsion-internal pressure have been applied to the thins-walled tubular specimens prepared from cold drawn tubes of SAE 1020 steel. Prior to the multiaxial loading, each specimen has been twisted to different shear strains. Uniaxial tensile yield stresses measured at different angles to the tube axis clearly show that the initial orthotropic symmetry is maintained during twisting. The orthotropy axes are observed to rotate with shear strains. The plane stress yield locus measured for each twisted specimens show that yield surface shape does not remain similar during twisting and thus anisotropic work hardening is not a function of only plastic work.

• 한국진공학회지
• /
• 제15권1호
• /
• pp.45-49
• /
• 2006

깨끗한 Cu(110)와 산소가 흡착된 Cu(110) 표면에 Cu 성장에 의한 광학적 이방성의 변화를 RDS를 이용하여 연구하였다. 250K에서 Cu를 성장하면서 성장 모드와 산소의 계면활성제 효과를 확인하였다. 두 표면에 Cu를 성장하면서 4,25eV 봉우리의 규칙적인 변화를 확인하여 layer-by-layer 모드를 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.539-542
• /
• 2003

We have studied cell gap-dependent electrode-optic characteristics of the FFS mode using the LC with negative dielectric anisotropy. In case of a small cell gap of 2 ${\mu}m$, the transmittance at the center of pixel and common electrodes is low due to stronger influence of surface anchoring that holds the LC to the initial state than twisting force induced by neighboring LCs. In case of a large cell gap of 4 ${\mu}m$, the influence of surface anchoring force becomes weak so that the LCs at the center of pixel and common electrode can be twisted enough by applied voltage, giving rise to high transmittance. Therefore, we conclude that the light efficiency in the device is dependent on the cell gap.

• Structural Engineering and Mechanics
• /
• 제53권2호
• /
• pp.277-296
• /
• 2015

The objective of this paper is to investigate the surface waves in fibre-reinforced anisotropic thermoelastic medium subjected to gravity field. The theory of generalized surface waves has firstly developed and then it has been employed to investigate particular cases of waves, viz., Stoneley waves, Rayleigh waves and Love waves. The analytical expressions for displacement components, force stress and temperature distribution are obtained in the physical domain by using the harmonic vibrations. The wave velocity equations have been obtained in different cases. The numerical results are given and presented graphically in Green-Lindsay and Lord-Shulman theory of thermoelasticity. Comparison was made with the results obtained in the presence and absence of gravity, anisotropy, relaxation times and parameters for fibrereinforced of the material medium. The results indicate that the effect of gravity, anisotropy, relaxation times and parameters for fibre-reinforced of the material medium are very pronounced.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.119-124
• /
• 1999

Silicon nitride ceramics with highly oriented microstructure were prepared by tape casting a slurry containing 5 wt% of the silicon nitride whiskers. The whiskers were aligned in the casting direction and worked as seeds for the grain growth. The anisotropy was observed from the sintering shrinkage, Vickers indentation crack lengths, and XRD patterns. The cracks were much longer on the surface normal to the aligned grains than on the tape casting surface where the lateral cracks were also observed. The effect of sintering additives and the annealing treatment on the indentation crack length was examined. The sample with higher silica content had longer cracks than the one with lower silica content. The crack length anisotropy increased after annealing at 2123K.

• 한국표면공학회지
• /
• 제23권3호
• /
• pp.150-159
• /
• 1990

The magnetic properties of electrodeposited iron and cobalt films on porous aluminum oxide film were examined. There exists perpendicular magnetic anisotropy due to the shape anisotropy. The coercivity and squareness ratio of films were strongly dependent on deposited particle diameter. The effect of packing fraction on squareness ratio was also apprecible. Unlike the iron-deposited films, the magnetic properties of cobalt films were changed by preferred orientation because of it's large crystal ansotropy constant.(about 10 times of Fe) The Fe deposited films were found to be more suitable for perpendicular magenetic recording media bacause perpendicular coercivity, squareness ratio and the ratio of perpendicular coercivity to horizontal ones of iron films are greater than those of cobalt films.

• 한국전기전자재료학회논문지
• /
• 제13권2호
• /
• pp.114-119
• /
• 2000

Etch characteristics of SF6/CI2 electron cyclotron resonance (ECR) plasmas have been investigated. Surface reaction of gas plasma with polysilicon was also analysed using X-ray photoelectron spectroscopy (XPS). At the same time, the relationship between surface reaction and the etched profile of polysilicon was examined using XPS. The etch rate of polysilicon and oxide increases with increasing flow rate of SF6 in the SF6/CI2 gas mixture, and tis selectivity also increase also increase. It was also found that as increasing flow rate of SF6 in the SF6/CI2 gas mixture, the atomic% of chlorine detected at surface region decrease, but F and S contents increase. At the same time, when the mixing ratio of SF6 gas increases, the anisotropy of etched polysilicon is sharply decreased in the 0%~10% range of the SF6 mixing ratio, but is rarely varied in the range over 10%, in spite of the large variations in flow rates. It can be explained that the bonding of S-Si due to SiSx(x$\leq$2) compound formed on the etched surface suppress the formation of Si-Cl and 'or Si-F bonding in the silicon etching.

• 한국지반공학회논문집
• /
• 제38권2호
• /
• pp.29-38
• /
• 2022

마찰 방향에 따른 전단 저항의 이방성을 지반 구조물에서 선택적으로 이용할 수가 있다. 예를 들어서, 축방향으로 하중을 가하는 깊은 기초, 소일 네일링, 타이백 등은 큰 전단 저항이 유발되므로 하중 전달 능력을 증가시키지만, 이와 반대로 말뚝 관입과 흙 시료 채취 등은 최소화된 전단 저항만 유발된다. 기존 연구는 뱀 비늘의 기하학적 형상과 유사한 표면 돌출부를 갖는 플레이트와 흙 경계면에서 유발되는 전단 저항 변화를 확인하였다. 본 논문에서는 표면 돌출부의 형상에 따른 경계면 마찰각의 변화를 정량적으로 평가하였다. 수정된 직접 전단 시험기를 이용하여 상대 밀도가 40%로 조성된 모래 시료에 대해 9개의 플레이트, 2개의 전단 방향(전단 시 돌출부 높이가 증가와 감소하는 방향), 그리고 3개의 초기 수직 응력(100kPa, 200kPa, 300kPa) 조건으로 총 51가지 경우를 실험 하였다. 실험 결과, 전단 응력은 돌출부 높이가 높을수록, 돌출부 길이가 짧을수록, 돌출부 높이가 증가하는 전단 방향에서 크게 나타났다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 임시총회 및 하계학술연구발표회
• /
• pp.145-145
• /
• 2009

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.83.1-83
• /
• 2000