• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.569-573
• /
• 2013

In this study, activated carbon fabric was prepared from a cellulose-based polymer (viscose rayon) via a combination of physical and chemical activation (mixed activation) processes by means of $CO_2$ as a gasifying agent and surface and adsorption properties were evaluated. Experiments were performed to investigate the consequence of activation temperature (750, 800, 850 and $925^{\circ}C$), activation time (15, 30, 45 and 60 minutes) and $CO_2$ flow rate (100, 200, 300 and 400 mL/min) on the surface and adsorption properties of ACF. The nitrogen adsorption isotherm at 77 K was measured and used for the determination of surface area, total pore volume, micropore volume, mesopore volume and pore size distribution using BET, t-plot, DR, BJH and DFT methods, respectively. It was observed that BET surface area and TPV increase with rising activation temperature and time due to the formation of new pores and the alteration of micropores into mesopores. It was also found that activation temperature dominantly affects the surface properties of ACF. The adsorption of iodine and $CCl_4$ onto ACF was investigated and both were found to correlate with surface area.

• 대한물리치료과학회지
• /
• 제25권1호
• /
• pp.20-30
• /
• 2018

Background: This study evaluates the effects of lower muscle activity of squat exercise on supporting surface and visual feedback. Methods: The subjects include 30 healthy subjects. To measure muscle activation of the lower limb during squat exercise(stable and unstable surface, visual and unvisual). For evaluation of muscle activation(rectus femoris, biceps femoris), was measured using the Electromyogram, EMG was used. Results: The results shows that Rectus Femoris(RF) and Biceps Femoris(BF) muscle activations were significantly (p<0.05) difference in unvisual-unstable surface(USUV), unvisual-stable surface(SUV), visual-unstable surface(USA), and visual-stable surface(SV) during squat exercise. Conclusion: Squat exercise can improve muscle activation of the lowe limb. particularly, unvisual-unstable surface during squat exercise can improve muscle activation of the lowe limb.

• Bulletin of the Korean Chemical Society
• /
• 제19권7호
• /
• pp.733-737
• /
• 1998

Using an atom superposition and electron delocalization molecular orbital (ASED-MO) method, we have compared adsorption properties of adsorbates on the Pt(Ill) surface with the Pt(lll)/γ-Al203 surface in the ethylene hydrogenation reaction. In two-layer thick model systems, the calculated activation energy of the hydrogenation by the surface platinum hydride is equal to the energy by the hydride over supported platinum/γ-alumina. The transition structure on platinum is very close to the structure on the supported platinum/γ-alumina surface. Hydrogenation by the surface hydride on platinum can take place easily because the activation energy is about 0.5 eV less than hydrogenation by ethylidene. On supported platinum/,y-alumina the activation energy of the hydride mechanism is about 0.61 eV less than that of ethylidene mechanism. In one-layer thick model systems, the activation energy of hydrogenation by ethylidene is about 0.13 eV less than the activation energy of hydride reaction. The calculated activation energy by the hydride over the supported platinum y-alumina is 0. 24 eV higher than the platinum surface. We have found from this result that the catalytic properties of one-layer thick model systems have been influenced by the support but the two-layer thick model systems have not been influenced by the support.

• 한국환경과학회지
• /
• 제16권9호
• /
• pp.1091-1098
• /
• 2007

Activated carbon was prepared from waste citrus peels by chemical activation with $ZnCl_2$. The optimal condition of carbonization was at $300^{\circ}C$ for 1.5 hr. Activation experiments with carbonized samples prepared at optimal carboniztion condition were carried out under various conditions such as activation temperature of 400 to $900^{\circ}C$, activation time of 0.5 to 2.0 hr, and $ZnCl_2$ ratio of 100 to 300%. In order to investigate the physical properties of the activated carbons prepared, iodine adsorptivities and specific surface areas were measured and their morphologies were observed from scanning electron microscopy. As $ZnCl_2$ ratio increased, activation yield decreased, while iodine adsorptivity and specific surface area increased. The optimal condition of activation was at 300% $ZnCl_2$ ratio and $300^{\circ}C$ for 1.5 hr, and then iodine adsorptivity and specific surface area was measured as about 862 mg/g and $756m^2/g$, respectively. SEM photography showed that the surface morphology was changed and many active pore were produced by chemical activation.

• Carbon letters
• /
• 제2권3_4호
• /
• pp.176-181
• /
• 2001

A series of activated carbons were prepared from coconut shells and coal-tar pitch binder by physical activation with steam in this study. The effect of variable processes such as activation temperature, activation time and ratio of mixing was investigated for optimizing those preparation parameters. The activation processes were carried out continuously. The nitrogen adsorption isotherms at 77 K on pellet-shaped activated carbons show the same trend of Type I by IUPAC classification. The average pore sizes were about 19-21${\AA}$. The specific surface areas ($S_{BET}$) of pellet typed ACs increased with increasing the activation temperature and time. Specific surface area of AC treated for 90 min at temperature $900^{\circ}C$ was 1082 $m^2/g$. The methylene blue numbers continuously increased with increasing the activation temperature and time. On the other hand, iodine numbers highly increased till activation time of 60 min, but the rate of increase of iodine numbers decreased after that time. This indicates that new micropores were created and the existing micropores turned into mesopores and macropores because of increased reactivity of carbon surface and $H_2O$.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.81-86
• /
• 2014

The process parameter in optimized KOH alkali activation of soft carbon series coke material in high purity was set with DOE experiments design. The activated carbon was produced by performing the activation process based on the set process parameters. The specific surface area was measured and pore size was analyzed by $N_2$ absorption method for the produced activated carbon. The surface functional group was analyzed by Boehm method and metal impurities were analyzed by XRF method. The specific surface area was increased over 2,000 $m^2/g$ as the mixing ratio of activation agent increased. The micro pores in $5{\sim}15{\AA}$ and surface functional group under 0.4 meq/g were obtained. The contents of the metal impurity in activated carbon which is the factor for reducing the electrochemical characteristics was reduced less than 100 ppm through the cleansing process optimization. The electrochemical characteristics of activated carbon in 38.5 F/g and 26.6 F/cc were checked through the impedance measuring with cyclic voltammetry scan rate in 50~300 mV/s and frequency in 10 mHz ~100 kHz. The activated carbon was made in the optimized activation process conditions of activation time in 40 minutes, mixing ratio of activation agent in 4.5 : 1.0 and heat treatment temperature over $650^{\circ}C$.

• PNF and Movement
• /
• 제16권1호
• /
• pp.125-132
• /
• 2018

Purpose: The aim of this study was to investigate the isolated activation ratio of the quadriceps femoris muscle on different support surfaces during squat exercise. Methods: Twenty participants (10 males and 10 females) voluntarily agreed to participate in the research after receiving an explanation about the purpose and process of the study. Each participant performed squat exercises on three different support surfaces (a flat surface, a form roller, and an unstable surface). Muscle activities of the rectus femoris (RF), vastus medialis (VM), and vastus lateralis (VL) were measured by electromyography. The isolated activation ratio of the quadriceps femoris muscle was calculated using the %isolation formula. Results: For the squat exercise, the %isolation value of the VM was significantly higher on the unstable surface than on the flat surface and form roller. In contrast, the %isolation values for the RF for the squat exercise were significantly higher on the flat surface and form roller than on the unstable surface. There was no significant differences in the %isolation values of the VL on the three different surfaces. Conclusion: The findings indicate that squat exercise on different surfaces results in differential activation of the quadriceps femoris muscle, which suggests that squat exercise on a multi-directional unstable surface could increase the isolated activation ratio of the VM.

• 한국대기환경학회지
• /
• 제21권4호
• /
• pp.471-478
• /
• 2005

The objective of this research is to improve adsorption efficiency of adsorbent made from MSWI (Municipal Solid Waste Incinerator) ny ash by $HNO_3$ activation. The acidity and the basicity were determined by Boehm's method and the surface structure was studied by BET method with N2 adsorption. The adsorption properties were investigated with benzene and MEK (Methylethylketone). $HNO_3$ activation can modify the surface property of an adsorbent such as specific surface area, pore volume, and functional group. According to the results, the specific surface area of the adsorbent was increased from $309.2m^2/g\;to\;553.2 m^2/g$ by activation. Also oxygen-containing functional groups were formed on it.

• 임산에너지
• /
• 제21권2호
• /
• pp.17-24
• /
• 2002

소나무 수피로 부터 수증기 활성화 의하여 활성탄을 제조하였으며, 제조된 활성탄은 세공 구조 및 표면적에 대한 검토를 행하였다. 활성화를 위하여 3종류의 서로 다른 형태의 로(정치식 수직, 수평로 및 회전식 수평로)가 본 실험에 사용되었다. 정치식 수직 및 수평로를 이용하여 수피를 탄화시키고 이를 수증기 활성화시키면, 1,000 ㎡／g이상의 높은 비표면적을 얻기는 어려웠다. 분말상태의 시료를 사용하면 비표면적이 약간 향상되었지만, 여전히 정치식 로의 경우 높은 비표면적의 결과를 얻기는 어려웠다. 로타리식 수평로에서 수피를 수증기 활성화시키면, 시판 1급 활성탄과 유사한 1,000 ㎡／g 이상의 비표면적을 나타내는 활성탄을 제조할 수 있었다. 로타리식 수평로에서 제조된 활성탄은 미세공에서 중세공까지 다양한 공극 분포를 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.346-349
• /
• 2002

High Power and high dose ion implantation is essentially needed to make power MOSFET devices based on SiC wafers, because the diffusivities of the impurities such as Al, N, p, B in SiC crystal are very low. In addition, it is needed high temperature annealing for electrical activation of the implanted species. Due to the very high annealing temperature, the surface morphology after electrical activation annealing becomes very rough. We have found the different surface morphologies between implanted and unimplanted region. The unimplanted region showed smoother surface morphology It implies that the damage induced by high energy ion implantation affects the roughening mechanism. Some parts of Si-C bonding are broken in the damaged layer, s\ulcorner the surface migration and sublimation become easy. Therefore the macrostep formation will be promoted. N-type 4H-SiC wafers, which were Al ion implanted at acceleration energy ranged from 30kev to 360kev, were activated at 1600$^{\circ}C$ for 30min. The pre-activation annealing for damage relaxation was performed at 1100-1500$^{\circ}C$ for 30min. The surface morphologies of pre-activation annealed and activation annealed were characterized by atomic force microscopy(AFM).