• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.2
• /
• pp.49-54
• /
• 2012

With the improvement of industrial society, the high quality electrical energy, simplification of operation and maintenance, ensuring reliability and safety are being required. This paper reviews a basic data of the surface discharge characteristics for teflon resin in not only pure $N_2$, $N_2:O_2$ mixture gas and Dry-Air as being focused on environmentally friendly insulating Gas also $SF_6$. Used electrodes are Knife to Knife. With the changing distance of electrodes and pressure, we can find it, surface discharge voltages and surface dielectric strengths, respectively. Surface discharge Voltages of $N_2:O_2=80:20$ mixture gas are more higher than the $N_2:O_2$ Mixture gases.

• Tribology and Lubricants
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2001

A method of calculating wear volume is developed using the signal processing technique. The lowpass filter with Fourier transform and the “windowing” are implemented in the method. User-defining feature is also included in determining the cutoff frequency of the low-pass filter and the baseline for the volume integration. Commercial software, MatLab, is used for the programming. Since the method uses the original wear data without simplifying the wear shape, it can give a further accurate result than the previously utilized methods, which often adopted the simplification. It becomes further powerful if the contacting body has a general shape rather than that gives well-formed surface traction (e.g., the Hertzian). The validation of applying the average surface roughness, Ra, to the “windowing” and the baseline for volume integration is discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.570-577
• /
• 2005

In this study a complete 3D surface reconstruction method is proposed based on the concept that the vertices of surface model can be completely matched to the unstructured point cloud. In order to generate the initial mesh model from the point cloud, the mesh subdivision of bounding box and shrink-wrapping algorithm are introduced. The control mesh model for well representing the topology of point cloud is derived from the initial mesh model by using the mesh simplification technique based on the original QEM algorithm, and the parametric surface model for approximately representing the geometry of point cloud is derived by applying the local subdivision surface fitting scheme on the control mesh model. And, to reconstruct the complete matching surface model, the insertion of isolated points on the parametric surface model and the mesh optimization are carried out Especially, the fast 3D surface reconstruction is realized by introducing the voxel-based nearest-point search algorithm, and the simulation results reveal the availability of the proposed surface reconstruction method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.12
• /
• pp.1633-1638
• /
• 1988

This paper proposes the lattice-structured space subdivision method using bounding volume to reduce a great number of ray-surface intersection calculations in ray tracing algorithm for the computer graphics. We show that this method reduced 50%-70% calculations compard to pre-exist method by experiments.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1326-1331
• /
• 2009

Drying process in the cylindrical thin film layer of sludge with the thickness less than a few millimeters has been investigated. Thin film drying is specially designed and used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic cylindrical surface through which thermal energy is supplied to the layer during drying. The wall temperature is assumed to be constant during drying in the present study for the simplification. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of some physical parameters on drying has been examined to figure out the drying characteristics of the sludge layer.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.4
• /
• pp.38-44
• /
• 2004

The motion response analysis of a submerged elliptic cylinder in waves is presented and the elliptic cylinder is a simplification of the section of submarine in this paper. The method is based on boundary integral method and two-dimensional 3 degree motions are calculated in regular harmonic waves. The fully nonlinear free surface boundary condition is assumed in an numerical domain and this solution is matched along an assumed boundary as a linear solution composed of transient Green function, The large amplitude motions of an elliptic cylinder are directly simulated and effects of wave frequency, wave amplitude and the distance from buoyancy center to gravity center are discussed.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1692-1700
• /
• 2009

This paper proposes the direction distribution of surface normal vectors as a feature descriptor of three-dimensional models. Proposed the feature descriptor handles rotation invariance using a principal component analysis(PCA) method, and performs mesh simplification to make it robust and nonsensitive against noise addition. Our method picks samples for the distribution of normal vectors to be proportional to the area of each polygon, applies weight to the normal vectors, and applies interpolation to enhance discrimination so that the information on the surface with less area may be less reflected on composing a feature descriptor. This research measures similarity between models with a L1-norm in the probability density histogram where the distances of feature descriptors are normalized. Experimental results have shown that the proposed method has improved the retrieval performance described in an average normalized modified retrieval rank(ANMRR) by about 17.2% and the retrieval performance described in a quantitative discrimination scale by 9.6%~17.5% as compared to the existing method.

• Korean Journal of Optics and Photonics
• /
• v.5 no.4
• /
• pp.439-444
• /
• 1994

When diffraction by arbitrary two-dimensional surface-relief dielectric gratings is analyzed using the rigorous three-dimensional vector coupled-wave analysis, it is found that the matrix eigenvalue problem pertaining to the analysis can always be simplified to that for a matrix which has the dimension of a quarter of the original, so that computing time and memory requirements for computer may be greatly reduced. However this kind of simplification can not be obtained in the case of volume diffraction gratings. tings.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.495-500
• /
• 2002

3D 컴퓨터 그래픽스 분야에서 사용되는 표면모델은 일반적으로 매우 복잡하고 방대한 양의 다각형 조각들로 구성된다. 이러한 표면 모델들은 사실감을 높일 수 있지만 지나치게 많은 데이터 양으로 인해 많은 문제들을 야기시킬 수 있다. 따라서 모델의 원래 모양을 가능하면 유지하면서 방대한 양의 데이터를 효과적으로 감소시킬 수 있는 방법이 필요하다. 본 논문에서는 지역표면의 기하학적 특성을 잘 보존할 수 있는 에지 비용함수를 제안한다. 또한 병합에 기반 한 반복적인 에지 축약을 기본 연산으로 하는 표면 간략화 알고리즘을 구현한다. 병합에 기반 한 축약방법은 메모리를 효율적으로 사용할 수 있게 하여 실시간 데이터 전송을 요하는 응용 시스템에 매우 효과적으로 적용될 수 있다. 제안하는 알고리즘을 표면모델에 적용시켜 간략화를 수행 한 결과 기존의 알고리즘에 비해 높은 품질의 근사모델을 얻을 수 있었으며 원래 모델의 세부적인 모양을 잘 보존할 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.7
• /
• pp.41-46
• /
• 2010

With the improvement of industrial society, high quality electrical energy, simplification of operation and maintenance, and ensuring reliability are being required. Also we request an urgent change from $SF_6$ gas to an environment-friendly gas insulation material. In this paper, the experiments of breakdown characteristics by pressure and gap change of $N_2/O_2$ mixture gas through a GIS (Gas Insulated Switchgear) model were described. This paper reviews basic data of the surface discharge characteristics for Teflon resin in not only pure $N_2$, $N_2:O_2$ mixture gas as being focused on environmentally-friendly insulating gas, but also $SF_6$. Also, insulation characteristics by breakdown voltage and surface discharge voltage of $N_2:O_2$ mixture gas in the experimental chamber were studied.