• 한국항만학회지
• /
• 제9권2호
• /
• pp.25-38
• /
• 1995

The wind generated circulation model describes the phenomenon based on the following physical assumptions: a) As the horizontal dimension of the flow domain is several orders of magnitude larger than vertical dimension, nearly horizontal flow is realistic. b) The time taken for circulation to develop may effect on the flow domain of the earth's rotation, the contribution of the Coriolis force. c) A flow domain of large dimension results in quite large Reynolds number and the Reynolds stresses are approximated by the turbulent mean velocity gradient. d) The circulation is forced by the shear stresses on the water surface exercised by the wind. Modification made to the depth average approximation of the convective terms and the bed shear stress terms by adopting a certain distribution of current over the depth and laboratory measurements for the bed shear expression. Modification circulation patterns, energy evolution and surface profile gave the significant differences comparing with the classical model results. The modified model results in higher free surface gradients balancing both the free surface shear and the bed shear and consequently to higher surface profiles along the coast.

• 한국지역지리학회지
• /
• 제12권5호
• /
• pp.614-630
• /
• 2006

자연 및 기술재해에 빠르고 효과적으로 대응하기 위해서는 그 재해지역 내에 있는 인구수를 정확히 추정할 필요가 있다. 그러나 센서스 구역과 재해지역의 공간적 불일치 문제 때문에, 재해지역 내에 있는 인구수를 정확하게 추정할 때에는 구역단위 인구자료를 공간적으로 세분화할 필요가 있다. 본 논문은 센서스 블럭그룹 내의 인구를 개개의 화소로 세분화하기 위한 밀도 구분적 표면모델을 구현하고, 그 표면기반 공간적 세분화 모델의 성능을 통계적 및 가시적으로 평가한다. 표면기반 공간적 세분화 모델은 밀도 구분적 내삽법과 위성영상으르부터 추출된 토지이용 및 피복자료를 사용하며 지리정보시스템에서 구현되었다. 토지이용 및 피복자료는 밀도 구분적 내삽법에서 인구의 지리적 분포에 관한 추가정보를 제공했고, 토지이용 및 피복자료의 퍼센트에 기반을 둔 경험적 표본추출법과 지역가중법은 각 화소에 대한 밀도 구분적 가중치를 객관적으로 결정하기 위해서 사용되었다. 표면기반 공간적 세분화 모델은 애틀란타 대도시권의 밀도 구분적 인구표면을 만드는데 적용되었다. 그 밀도 구분적 인구표변의 정확도는 센서스 수치와의 비교를 통해서 RMSE와 수정 RMSE를 사용하면서 검증되었다. 또한, 각 센서스 트랙과 블럭그룹별 오차들은 퍼센트 오차지도들에 의해서 가시화 되었다. 분석결과에 따르면, 밀도 구분적 인구표면은 인구수의 정확한 추정치를 제시할 뿐만 아니라, 센서스 블록그룹 내의 인구의 상세한 공간분포를 보여 준다. 또한, 인구표면은 대개 교외 및 산림지역 그리고 도심지역에서 인구를 과소평가하거나 과대평가하는 경향이 있다는 것을 밝혀냈다.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.243-252
• /
• 2010

This paper describes a new practical simplification method for feature-based solid models. In this approach, a solid model created using feature modeling operations is first simplified by the suppression of detailed features, and then, if necessary, the model is converted to a surface model to facilitate its modification. Finally, the simplified surface model is delivered to analysis packages. The algorithm was implemented based on CATIA V.5 and applied to mid-surface generation of plastic parts for structural analysis to prove the validity and usefulness.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.1-6
• /
• 2001

An analytical thermal model of HESG(higt efficiency speed grinding) is presented, in which the heat flux to workpiece in grinding zone is modeled as time dependent and moves along a slope decided by contact chord(approximation of con-tact arc). By matching the maximum surface temperature of workpiece derived from this model to the maximum surface temperature of grinding wheel composite as done in Lavins simple thermal model, the relation of maximum surface tem-perature and energy partition of workpiece to grinding speed is obtained. In high speed grinding, as wheel speed increases, energy partition decreases with no regard to table speed.

• 신재생에너지
• /
• 제7권1호
• /
• pp.22-28
• /
• 2011

The surface solar radiations were calculated and analyzed with spatial resolutions (4 km and 1 km) using by GWNU (Gangneung-Wonju National University) solar radiation model. The GWNU solar radiation model is used various data such as aerosol optical thickness, ozone amount, total precipitable water and cloud factor are retrieved from Moderate Resolution Imaging Spectrometer (MODIS), Ozone Monitoring Instrument (OMI), MTSAT-1R satellite data and output of the Regional Data Assimilation Prediction System(RDAPS) model by Korea Meteorological Administration (KMA), respectively. The differences of spatial resolutions were analyzed with input data (especially, cloud factor from MTSAT-1R satellite). And the Maximum solar radiation by GWNU model were found in Andong, Daegu and Jinju regions and these results were corresponded with the MTSAT-1R cloud factor.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.182-189
• /
• 2005

The human knee joint is the intermediate joint of the lower limb that is the largest and most complex joint in the body. Understanding of joint-articulating surface motion is essential for the joint wear, stability, mobility, degeneration, determination of proper diagnosis and so on. However, many studies analyzed the passive motion of the lower limb because of the skin marker artefact and some studies described medial and lateral condyle of a femur as a simple sphere due to the complexity of geometry. Thus, in this paper, we constructed a three-dimensional geometric model of the human knee from the geometry of its anatomical structures using non-uniform B-spline surface fitting as a study for the kinematic analysis of more realistic human knee model. In addition, we developed and verified 6-DOF contact model of the human knee joint using $C^2$ continuous surface of the inferior region of a femur, considering the relative motion of shank to thigh during locomotion.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.725-738
• /
• 2016

A theoretical study of the behavior of structured soils is presented herein. By introducing the effect of soil structure and loading history into the Cam Clay model, a new model was formulated. The concept of differing void ratios was modified to combine structural parameters and the over consolidation ratio, and an evolution law was proposed. Upon introducing the concept of the subloading yield surface, a new two-yield surface model was obtained. The predicted results were compared to the experimental data, demonstrating that the new model provided satisfactory qualitative modeling of many important features of structured soils.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1023-1028
• /
• 2004

A micro-pressure wave is generated by the high-speed train which enters a tunnel, and it causes explosive noise and vibration at the exit. It is known that train speed, train-tunnel area ratio, nose slenderness and nose shape mainly influence on generating micro-pressure wave. So it is required to minimize it by searching optimal values of such train shape factors and tunnel condition. In this study, response surface model, one of approximation models, is used to perform optimization effectively and analyze sensitivity of design variables. Owen's randomized orthogonal array and D-optimal Design are used to construct response surface model. In order to increase accuracy of model, stepwise regression is selected. Finally SQP(Sequential Quadratic Programming) optimization algorithm is used to minimize the maximum micro-pressure wave by using built approximation model.

• 물과 미래
• /
• 제23권3호
• /
• pp.351-361
• /
• 1990

식생계로 피복되고 투수성 토양을 갖는 산지유역에서의 점유출량 결정을 위해 초과우량 추정모형을 유도하였다. 산림에 의한 canopy차단 및 풀, 낙엽, 농작물 등에 의한 지표피복차단저축을 고려하고, 유역 포화시의 증발산량을 계산하여 관측강우로부터 지표 흙에 도달되는 순강우량을 결정하였다. 부정강우사상에 적용할 수 있도록 수정된 Green-Ampt모형으로부터 침투율을 결정하여 초과우량을 산정하였고, IHP 대표시험유역 가운데 장평유역의 실제호우사상에 적용하여 손실율, 유출율 및 유출발생시간 등을 결정, 적용성 여부를 검토하였다.

• 한국항해항만학회지
• /
• 제47권2호
• /
• pp.66-74
• /
• 2023

With the increase of interest in developing Maritime Autonomous Surface Ships (MASS), an optimal ship route planning is gradually gaining popularity as one of the important subsystems for autonomy of modern marine vessels. In the present paper, an optimal ship route planning model for MASS is proposed using a nonlinear MPC approach together with a nonlinear MMG model. Results drawn from this study demonstrated that the optimization problem for the ship route was successfully solved with satisfaction of the nonlinear dynamics of the ship and all constraints for the state and manipulated variables using the nonlinear MPC approach. Given that a route generation system capable of accounting for nonlinear dynamics of the ship and equality/inequality constraints is essential for achieving fully autonomous navigation at sea, it is expected that this paper will contribute to the field of autonomous vehicles by demonstrating the performance of the proposed optimal ship route planning model.