• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.319-324
• /
• 2004

With a PMS, a maintenance plan should be drawn up after surface conditions are precisely examined and analyzed. The majority of the present PMSs are run by the fact that experts first examine surface conditions on sites, and then enter results into systems. However, considering the actual circumstances of the present time and an increase in paved road hereafter, it is inefficient that experts examine the whole paved roads in person and long-lasting PMSs can not be kept up. Therefore, in the study digital photogrammetry was used to examine asphalt concrete pavements. In a consequence, it was found that if databases are implemented in the future with quality digital image information accumulated from studies on roads, they will be able to provide the field of pavement management system with a large amount of information and data.

• 한국치위생학회지
• /
• 제14권5호
• /
• pp.609-615
• /
• 2014

Objectives : In most developed countries there has been a substantial decrease in the prevalence of dental caries in children of 12 years old over the past 40 years. This change in epidemiology highlights the importance of preventive management in dentistry. For successful management of early caries lesions, it is essential to detect and assess the pathological changes of dental caries. Therefore, the purpose of this study was to investigate the overview of International Caries Detection and Assessment System(ICDAS) criteria for the detection and assessment of early caries lesions by literature reviews. Methods : The author reviewed the MEDLINE search by the key words of 'caries assessment', 'caries detection', 'caries measurement', and 'ICDAS'. Results : This literature review provided an overview of International Caries Detection and Assessment System(ICDAS) criteria for the detection and assessment of early caries lesions. This article showed the principles, concept, and primary caries detection criteria of the ICDAS. The ICDAS can macroscopically measure the enamel surface changes and potential histological depth of caries lesions by the surface characteristics of the teeth. The ICDAS criteria allow researchers and clinicians to choose the stage of dental caries and characteristics for assessment. Conclusions : ICDAS can be an adjunct method to clinical decision making and preventive treatment planning.

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.317-322
• /
• 2017

When the heat flux on the heating surface following changing heat condition in the boiling heat transfer system exceeds critical heat flux, the critical heat flux phenomenon is going over to immediately the film boiling area and then it is occurred the physical destruction phenomenon of various heat transfer systems. In order to maximize the safe operation and performance of the heat transfer system, it is essential to improve the CHF(Critical Heat Flux) of the system. Therefore, we have analysis the effect of improving CHF and characteristics of heat transfer following the nanoparticle coating thickness. As the results, copper nanocoating time are increased to CHF, and in case of nano-coatings are increased spray-deposited coating times more than in the fure water; copper nanopowder is increased up to 6.40%. The boiling heat transfer coefficients of the pure water are increased up to 5.79% respectively. Also, the contact angle is decreased and surface roughness is increased when nano-coating time is increasingly going up.

• 시스템엔지니어링학술지
• /
• 제19권1호
• /
• pp.79-90
• /
• 2023

In principle, R&D of general weapons systems are led by companies or government-funded organizations. In terms of project execution, the defense R&D planning system was reorganized to conduct SE-based project management by integrating the naval ship project execution procedure into the general weapon system R&D procedure. The development progress was confirmed according to the guide for SE application of DAPA, and a technical review meeting was proposed to enter into the each next phase in the R&D process. This paper focuses on improvement for technical review in terms of technical management based on system engineering for R&D mounted weapon systems and the naval surface ship project in preliminary design and detailed design. So, the improvement direction for reviewing the entry criteria for the R&D weapons systems of the naval ship and mounted weapons is proposed.

• 수산해양기술연구
• /
• 제42권1호
• /
• pp.44-53
• /
• 2006

The expansion of near shore aquaculture is feasibility of moving aquaculture facilities into the open ocean. Numerical modeling technique using finite element method was used to enable the optimum design and evaluation of submersible aquaculture cage system. The characteristics of mooring loads response in mooring lines under waves and current and their response amplitude operators were calculated for single and three point mooring configuration at the surface condition and submerged one. The static mooring loads without wave and current loading were similar for both the surface and submerged configuration. It was calculated that three point mooring was more adequate than single point mooring for the mooring configuration of submersible aquaculture cage system. The wave induced response amplitude operators for the single point mooring configuration with the influence of currents were identical to those without the influence of currents.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.306-314
• /
• 2003

Engineered barrier test facility is specially designed to demonstrate the performance of engineered barrier system for the near-surface disposal facility under the domestic environmental conditions. Comprehensive measurement systems for the water content, temperature, matric potential are installed within each test cell. In this study, short-term monitoring of the behavior of multi-layered cover system is implemented with artificial rainfall system. The periodic measurement data are collected and analyzed by a dedicated database management system, and provide a basis for performance verification of the disposal cover design.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.443-452
• /
• 2005

In order to enhance the quality of the glass bottle and to preserve the contents long, corrosion of the bottle surface is often required. The corrosion operation consists of dangerous and harmful tasks using strong acid such as HF. Thus, the corrosion operation should be automatized to improve the worker's safety. The first step of the automation is to develop the bottle gripping system that automatically grips and fixes the bottle during corrosion operations. The gripping system consists of holders, holder plates, air cylinders, and bottle aligning system. This paper shows the gripping system development procedure.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.211-218
• /
• 1994

Grinding is considered as a very effective machining technology to attain high production rates and a good surface quality of hard and brittle components. However, the grinding operations till needs the skill and the experience of an operator because of a lack of scientific knowledge and engineering principles. This is the reason why grinding operations are not completley intergrated in CIMS(Computer Intergrated Manufacturing System. Recent develop- ment focus on expert system which deals with domain specific knowledge in order to solve this problem. Firstly, in this study, a basic strategy to develop the grinding knowledge-base for grinding is discussed. Next, the architecture of knowledge-base and management of the grinding knowledge-base(GKB) is described.

• 한국안전학회지
• /
• 제28권1호
• /
• pp.158-163
• /
• 2013

While job stress evaluations are reported in the recent surveys upon the nuclear power plants(NPPs), any significant advance in the types of questionnaires is not currently found. There are limitations to their usefulness as analytic tools for the management of safety resources in NPPs. Data mining(DM) has emerged as one of the key features for data computing and analysis to conduct a survey analysis. There are still limitations to its capability such as dimensionality associated with many survey questions and quality of information. Even though some survey methods may have significant advantages, often these methods do not provide enough evidence of causal relationships and the statistical inferences among a large number of input factors and responses. In order to address these limitations on the data computing and analysis capabilities, we propose an advanced procedure of survey analysis incorporating the DM method into a statistical analysis. The DM method can reduce dimensionality of risk factors, but DM method may not discuss the robustness of solutions, either by considering data preprocesses for outliers and missing values, or by considering uncontrollable noise factors. We propose three steps to address these limitations. The first step shows data mining with response surface method(RSM), to deal with specific situations by creating a new method called response surface data mining(RSDM). The second step follows the RSDM with detailed statistical relationships between the risk factors and the response of interest, and shows the demonstration the proposed RSDM can effectively find significant physical, psycho-social, and environmental risk factors by reducing the dimensionality with the process providing detailed statistical inferences. The final step suggest a robust stress management system which effectively manage job stress of the workers in NPPs as a part of a safety resource management using the surrogate variable concept.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.662-666
• /
• 1996

The variations of the surface topographical parameters for the analysis of the pedestrian slip and fall accidents during the sliding friction between the specially prepared floor specimens and three working shoes were investigated. The profile ordinate data for each flooring specimen were obtained at 1.1 .mu.m intervals using a laser scanning confocal microscope system along to the direction of sliding. A number of surface roughness parameters, that is, the centre line average (c.l.a.) and root mean square (r.m.s.) roughness, maximum height (Rtm), maximum mean peak height (Rpm), maximum mean depth (Rvm), and average asperity slope were calculated using a computer program and compared with the dynamic friction results. The analysis showed that the surface parameters undergo marked variations during the sliding process, but the variations were statistically significant. It was found that amongst various surface parameters, the maximum depth (Rvm) and the average asperity slope of the asperities were the biggest variation during the sliding proceeding. This result confirms the previous study and may suggests a new approach to monitoring the flooring environments with their service as the effort to reduce the pedestrain slip accident.