• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.484-492
• /
• 2012

The TMS(Thermal Management System) heater in a fuel cell vehicle has been developed to prevent a decline of fuel cell durability and cold start durability. Main functions of the COD(Cathode Oxygen Depletion) heater are depletion of oxygen in a cathode as heat energy and consumption of electric power for rapid warming up of a fuel cell stack. This paper covers subjects including the design specification of a heater, heater controller for detection of overheat and reliability assessment including coolant pressure cycle test of a heater. To verify the design concept, burst pressure and deformation analysis of plastic housing were carried out. Also, temperature distribution analysis of heater surface and coolant inside of housing were carried out to verify the design concept. By designing the plastic housing instead of a steel housing, the 30% weight lightening and 50% cost reduction were attained. A module-based design of a TMS system including a heater or reducing the watt density of a heater is a problem to be solved in the near future work.

• 한국지반환경공학회 논문집
• /
• 제15권9호
• /
• pp.77-85
• /
• 2014

현재 소방방재청에서는 국가재난관리시스템(NDMS, National Disaster Management System)을 운영 중에 있으나 급경사지정보의 입력 및 관리를 위한 기능이 단순한 DB 입력 관리 기능으로 존재하고 있어 신속하고 체계적인 급경사지 관리에 어려움이 존재하고 있는 실정이다. 최근 빈번한 국지성 집중호우에 의한 우면산 산사태, 춘천 산사태 등의 대규모 산사태가 증가하고 있어 급경사지의 위험도가 급증하고 있으며, 국가 재해 재난이 빠른 추세로 증가하고 있다. 이에 대한 선제적 대응 및 관리의 고도화를 위해서는 급경사지 방재 및 관리를 위한 GIS 기반의 급경사지정보 통합관리시스템의 개발이 필요하다. 본 연구에서는 급경사지 재해 재난에 대한 선제적 대응 및 안전한 관리를 위한 국가 차원의 GIS 기술 기반의 급경사지정보 통합관리시스템을 개발하였다. 급경사지정보 통합관리시스템은 급경사지 일제조사서기반의 지표면정보와 지하공간정보의 입력 및 출력 DB를 설계 구축하여 개발하였다. 본 연구를 통하여 개발한 급경사지정보 통합관리시스템은 지표면정보 입력모듈, 급경사지 주변 지하공간정보 DB 실시간 연계 입력모듈, V-World 배경지도 기반의 급경사지 검색 분석 관리를 위한 GIS 모듈, 급경사지정보 통합정보시스템 사용자 관리모듈, 급경사지정보 활용 연계시스템과의 실시간 연계 인터페이스모듈로 구성된다. 또한 개발한 급경사지정보 통합관리시스템에 대하여 자료저장률, 동시접속 시 시스템 안정성, 처리속도의 일관성에 대한 안정성테스트를 수행하여 급경사지정보 통합관리시스템의 연결성을 확보하였다.

• 한국항행학회논문지
• /
• 제19권1호
• /
• pp.33-40
• /
• 2015

A-SMGCS는 모든 기상조건에서 공항 이동지역 내 요구되는 안전수준을 확보하는 동시에 정해진 지상이동률을 유지하기 위하여 항공기와 차량에게 경로, 안내, 감시, 통제기능을 제공하는 시스템이다. 본 연구에서는 A-SMGCS 적합성 검증방안을 개발하기 위해 시스템 엔지니어링을 도입하였다. A-SMGCS 운용개념을 통해 레벨 IV급 A-SMGCS에 대한 요구사항을 정의하였으며, 기능분석과 할당을 통해 시스템 아키텍처와 시스템 규격을 도출하였다. A-SMGCS 개발을 위한 WBS와 IMS를 수립하였으며, 마지막으로 시스템에 대한 확인 및 검증을 위한 CCL과 TEMP를 개발하였다.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.808-813
• /
• 2005

Effective cost management requires reliable cost estimates at every stage of project development. The primary purpose of this research is to develop systematic modeling procedures and an automatic computing program for infrastructure estimating in the Texas Department of Transportation (TxDOT). The computing system toggles between project input information and segregated district unit prices for highway work item quantity estimates associated with earthwork and landscape, subgrade treatments and base, surface courses and pavement, structures, miscellaneous construction, and lighting, signing, markings and signals. This quantity-based approach was chosen because of the conventional approach lacking of quantity information until primary design is complete.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1993년도 학술대회지
• /
• pp.155-163
• /
• 1993

An American ginseng(Panax quillquefolium L) industry has emerged in British Columbia, Canada over the past ten years. Interest has grown very rapidly and with this development, attention is now moving away from field production issues and emphasis is being directed to enhancements in ginseng storage, drying and processing. There is a dearth of knowledge on these aspects even though they are crucial to international competitiveness. Enhancement dicatates the application of a systems approach to optimizing the harvest and post - harvest production system(crop digging, pre - washing cold storage. washing, drying and post - drying storage). Research in British Columbia to date has focussed on drying and storage issues and has resulted in the design of an enhanced commercial drying system. The role of dryer management, loading rates, airflow rates and pre - drying cold storage on American ginseng root drying rates and root quality were examined. From the dryer management experiments, there are distinct advantages to size sorting root to yield optimum drying rates. If unsorted root is used, efficiency is increased if the trays are systematically rotated. Loading rate experiments illustrate that increasing rates above those currently used in commercial dryers are possible without any sacrifice in quality. This has significant implications for commercial drying. Pre - drying cold storage is a most significant tool for managing drying operations. Over a period of six weeks, no discernable decrease in quality was found as a consequence of cold storage. Further, the moisture loss and the associated root surface changes(loss of surface soil in storage for example) provide new challenges for root quality management. Continued research and technological innovation will be crucial in addressing the demanding challenges of the future.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.113-123
• /
• 1997

This study was initiated to build runoff plots, install soil and water quality monitoring systems and collect background data from the plots and neighboring soils as the 1st year study of a 5 year project to assess soil quality and develop the management practices for environmentally sound agriculture in mountainous soils. Eleven $3{\times}15m$ runoff plots and monitoring systems were installed at a field of National Alpine Agricultural Experiment Station to monitor soil quality and discharge of nonpoint source pollutants. Corn and potato were cultivated under different fertilizer, tillage and residue cover treatments. The soil has a single-layered cluster structure that has a relatively good hydrologic properties and can adsorb a large amount of nutrient. Concentrations of T-N, $NH_4$-N, and $NO_3$-N of surface soil sampled in the winter were relatively high. Runoff quality in the winter and thawing season in the spring was largely dependent on surface freezing, snow accumulation, temperature, surface thawing depth and so on. Runoff during the thawing season caused serious soil erosion but runoff quality during the winter was relatively good. Serious wind erosion from unprotected fields after the fall harvest were obserbed and best management practices to reduce the erosion need to be developed.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.1-8
• /
• 2012

PURPOSES : Skid resistance on pavements plays an important role in reducing the risk of vehicle skidding on wet surface particularly. Almost 9.3 percent of traffic accidents were occurred under rainy condition and these are over-represented in terms of the severity of the crashes. Recently, unusual weather conditions referred widely as the intensified rainfalls justify the need of a systematic management of skid resistance. In this context, the study carried out the observational study on the skid resistance characteristics of different types of pavement with the time passage. METHODS : This study measured the skid resistance with Pavement Friction Tester at three times within five years. The skid resistance measurement has followed the method suggested by ASTM. RESULTS : As the main results under the scope of this study, skid resistance of asphalt concrete has not nearly reduced with time. On the contrary, skid resistance of cement concrete has been rapidly reduced with time though the highest resistance was gained at the early observation. Porous asphalt concrete shows a steady decrease of skid resistance with time, anyway, the reduction rate according to the increase of measurement speeds is relatively lower than the others. CONCLUSIONS : Based on our study, skid resistance of the pavement should be regarded as one of the pavement management system, so periodic measurement should be made to assure road safety as a whole.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.412-416
• /
• 2001

Among water quality models, WASP5 was applied to Boryeong freshwater lake, as a part of Water Quality Management System. The WASP modeling system is a generalized modeling framework for contaminant fate and transport in surface waters. The simulated result was compaired with actual measurement. So, before and after making freshwater lake were compaired. After this research, the lake may have eutrophication and water quality would be worse after making the lake as freshwater lake. Therefore, to make the freshwater lake better, more appropriate plan is necessary.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.273-278
• /
• 1988

This paper represents the computer application techniques of initial and modification machining for dies with 3-dimensional scluptured surfaces. All procedures from die design to die machining and measurement are covered. The component of modelling is data management and modification (extrapolation and smoothing), surface modelling, and nc program preparation. Also this paper introduces the utility for successful and efficient operation of system such as map generation, data communication, tool path verification, contour map generation, graphic processing of extrapolation and smoothing results, and CAD/CAM system interface. Examples are given to illustrate the modelling.

• International Journal of Railway
• /
• 제2권1호
• /
• pp.18-21
• /
• 2009

The basis of modem risk-based safety management is to focus on what might happen and ensure it is designed out of the system by robust hazard identification and risk analysis. However, in the real world things go wrong and it is essential to be prepared for the worst so that the response can minimise harm and loss of property and damage to the environment. Whilst some hazard mitigation measures are aimed at preventing incidents, others are venting escalation. The results of the tests concluded that the most effective means by the control room, both with and without, local station staff assistance using directive public address announcements and CCTV surveillance.