• Structural Engineering and Mechanics
• /
• 제43권6호
• /
• pp.835-845
• /
• 2012

This paper focuses on the stochastic response analysis of industrial masonry chimneys to surface blast-induced random ground motions by using a three dimensional finite element model. Underground blasts induce ground shocks on nearby structures. Depending on the distance between the explosion centre and the structure, masonry structures will be subjected to ground motions due to the surface explosions. Blast-induced random ground motions can be defined in terms of the power spectral density function and applied to each support point of the 3D finite element model of the industrial masonry system. In this paper, mainly a parametric study is conducted to estimate the effect of the blast-induced ground motions on the stochastic response of a chimney type masonry structure. With this purpose, different values of charge weight and distance from the charge centre are considered for the analyses of the chimney. The results of the study underline the remarkable effect of the surface blast-induced ground motions on the stochastic behaviour of industrial masonry type chimneys.

• 한국토양비료학회지
• /
• 제26권3호
• /
• pp.160-171
• /
• 1993

Ultisol(필리핀의 Luisiana 토양)과 Alfisol(필리핀의 Maahas 토양)및 Inceptisol(한국의 용지통) 토양의 표면전하 특성을 전위차 측정법과 역적정법 및 이온흡착법 등의 세가지 방법으로 정량하였고 분석법간의 차이를 비교한 결과는 아래와 같다. 1. 이온흡착법(또는 CEC-AEC method)으로 구한 PZNC(point of zero net charge)값은 Luisiana토양과 Maahas 토양 및 용지통에서 각각 3.1, 2.2 및 2.9였다. 따라서 이들 토양의 자연 pH조건에서는 음전하를 보였다. 2. 전위차 적정법과 역적정법에서 구한 PZSE(point of zero salt effect)값은 Maahas토양 외의 두 토양에서 일치하였다. 3. PZNC값은 PZSE값에 비해 모든 토양에서 낮았는데 이는 영구음전하의 영향으로 생각되었다. 한편 Uehara and gillman(1980)의 이론에 의해 구한 영구음전하는 Luisiana 토양과 Maahas 토양 및 용지통에서 각각 2.6, 4.5 및 0.4me/100g로 pH 7에서 측정된 CEC중 상당히 적은 부분을 차지하였다. 4. 역적정법은 pH가 너무 높거나 낮을 때 전위차 적정법이 표면전하를 과다 평가하는 결점을 보완해 주었으나 여전히 이온흡착법에 비해 과대 평가하고 있어 영구전하의 영향이 큰 보통 토양에서는 이온흡착법의 사용이 나을 것으로 판단되었다.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.151-155
• /
• 2004

Cold plasma of $O_2$ or Ar was irradiated on hydrophobic Kapton surface to attenuate or remove the electrostatic potential. A measurement on charge dissipation speed clarifies the obscure effect of plasma. These consequences reveal that $O_2$ plasma etching is more effective than Ar plasma. After 30 days, the dissipation speed of accumulated charge on initially etched sample has not changed under summer season.

• 대한전자공학회논문지SD
• /
• 제41권2호
• /
• pp.9-15
• /
• 2004

본 논문에서는 부분공핍(partially-depleted : PD) 영역과 완전공핍(fully-depleted : FD) 영역을 나누는 임계 전면 게이트 전압 V/sub c/의 해석적 표현을 이용해서 PD 영역과 FD 영역의 천이를 정확히 설명하는 해석적 표면전위 모델(analytical surface potential model)을 소개한다. 이 모델은 모든 동작영역(subthreshold에서 strong inversion까지)에서 유효하고 반복 계산 절차 (iteration procedure)인 수치 해석적 방법보다 훨씬 짧은 계산시간이 걸린다. 이 모델에 기초한 charge sheet 모델이 모는 동작영역에 유효한 드레인 전류의 단일 공식을 유도하는데 사용된다. 대부분의 secondary 효과들이 charge sheet 모델에 쉽게 포함되고 그 모델의 결과들은 수치해석 결과와 실험 결과를 비교적 정확히 일치한다. 세 가지의 smoothing 함수가 사용될지 라도 표면전위 미분 값은 연속이다 더욱 중요한 점은 smoothing 함수에 사용된 파라미터들은 공정 파라미터들에 크게 의존하지 않는다.

• 대한전기학회논문지
• /
• 제41권1호
• /
• pp.42-49
• /
• 1992

Charge accumulation characteristics in low density polyethylene (LDPE) has been discussed based upon the internal charge distrubution measured by the pulsed electroacoustic technique. When the negative voltage with respect to earth is applied to the upper electrode, the negative charges near the anode and the positive charges near the cathode are accumulated in LDPE. Also, there was an asymmetric behavior of charge accumulation exhibiting that the charge accumulation near the anode keeps increasing whereas that near the cathode increases first and then decreases. Besides, under the present test conditions the internal charge distrubution becomes stabilized eventually. When the positive voltage with respect to earth is applied to the upper electrode, on the other hand, no such asymmetric charge accumulation was found. Therefore, it can be concluded that the heterocharges are accumulated at the surface region of LDPE subjected to high do voltages and that the begavior of charge accumulation depends on the polarity of do voltage and the position of charge accumulation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.530-537
• /
• 2013

An explicit surface potential calculation method of gate-all-around MOSFET (GAAMOSFET) devices which takes into account both interface trap charge and varying doping levels is presented. The results of the method are extensively verified by numerical simulation. Results from the model are used to find qualitative and quantitative effect of interface trap charge on subthreshold slope (SS) of GAAMOSFET devices. Further, design constraints of GAAMOSFET devices with emphasis on the effect of interface trap charge on device SS performance are investigated.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.26-32
• /
• 2000

The impact of major surface chemical properties of silica sols on the retention and drainage performance of the silica based micrparticle system, Compozil was investigated using four different silica sols. And the effect of silica properties on the interactions with cationic starch and cationic plyacrylamide has also been identified. The surface charge density and the stability over pH of silica sols were increased by introducing aluminosilicate anions at surface. It was found that the charge density of silica sols determined the addition level necessary to attain the maximum retention and drainage. When silica sols were combined with cationic starch, the change density of the product was the critical properties and the degree of microagregation was of minor importance. In the cationic polyacrylamide system the degree of colloid structure appeared to be a more critcial property than the charge density of silica sols.

• 멤브레인
• /
• 제12권1호
• /
• pp.28-40
• /
• 2002

본 연구는 복합 박막 활성층의전기적/분자 구조적인 특성이 오염성에 어떤 영향을 미치는가를 조사하였다. 복합 박막 형태의 폴리아미드계 역삼투 분리막에 대한 오염 거동 현상을 이해하는데 있어 표면 구조와 표면 전하의 연구는 매우 효과적이다. AFM 전자현미경을 이용한 표면 구조 분석과 EKA 전위차 측정기를 통한 표면 전하의 분석 결과는 역삼투 분리막의 오염에 영향을 미치는 중요한 인자를 보여주고 있다. 복합막의 활성층이 중성에 가까울수록, 조도 차가 작을수록 역삼투막의 유량 감소 속도는 줄어든다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.526-530
• /
• 2004

We report the space charge and the surface potential of the interface between metal and CuPc according to isotropic property and different metal by measuring the microwave reflection coefficients $S_{11}$ of copper(II)-phthalocyanine(CuPc) thin films by using a near-field microwave microscope(NSMM) in order to understand. CuPc thin films were prepared on gold and aluminium substrates using a thermal evaporation method. Two kinds of CuPc thin films were prepared. One was deposited on preheated substrate at $150^{\circ}C$ and the other was annealed after deposition by using thermal evaporation methods. The microwave reflection coefficients $S_{11}$ of CuPc thin films were changed by the dependence on the heat treatment conditions. By comparing reflection coefficient $S_{11}$ we measured electrical conductivity of CuPc thin films and studied this results with respect to the surface potential and space charge of the interface between metal and CuPc thin films.

• 센서학회지
• /
• 제30권5호
• /
• pp.326-330
• /
• 2021

Reactions between gold (Au) surface plasmon resonance (SPR) chips and bovine serum albumin (BSA) dissolved in solutions of different pH were investigated. The charge on the BSA depends on the pH of the solution in which it is dissolved. Thus, dissolving BSA in different pH solutions resulted in different charges of BSA. Among the BSA dissolved in solutions with pH 4.01, 7.4, and 10.01, the SPR response was the highest for BSA dissolved in the solution of pH 4.01. To eliminate the response variation owing to the difference in the refractive indices of the solutions, phosphate buffered saline (PBS) was injected into the system after the reaction of BSA with the Au SPR chip had happened. In this case too, the BSA dissolved in the solution with pH 4.01 exhibited the highest response. This may be attributed to the non-uniform distribution of ionic patches on the BSA, which can induce electrostatic attraction to the surface even though BSA has a positive charge at pH 4.01, and the absolute values of the net charge of BSA at pH 4.01 and 7.4 were very close.